(oi | ima Die Line 148.5 mm Wireless Optical Mouse User Manual Product Feature 1. 2.4GHz reliable wireless, up to 30 feet/10M use distance 2, Plug-And-Play 3. Resolution: 800DPI 4. Auto-sleeping mode for prolonging battery life 5. Support USB 1.1/2.0 6. Windows and Macintosh compatible 7. Nano transceiver is easily stored in the bottom of the mouse for travel Packaging Content 2.4G wireless optical mouse Nano Transceiver 2 x AAA batteries (included) System Requirement 1. Windows XP / Vista / Windows 7 2. MAC 10.3 or later 3. Computer with USB port Installation 1. Insert the two AAA batteries correctly according to the polarity marks of the battery grooves into the mouse. (Please pay attention to the polarity marks otherwise the mouse will be damaged.)
~Zr~) Attention
* Take the battery out and plug in the nano transceiver to the bottom of mouse if you will not use the mouse for a long time. When the connection of mouse and nano transceiver is lost, please press three buttons of the mouse at the same time (left / right / middle wheel buttons) for 5 seconds. Plug in the nano transceiver to the computer USB port. After 30 seconds , the mouse and nano transceiver will be reconnected again. 105 mm 9269833F2MouseBacker Instruction Sheet Units : mm / ( +0.5mm ) / Size: W.105 x H.148.5 / Artwork Date : 23.AUG.2011 tood noitouiten| 19AosG@seu0MSAEEBease enil sid re oO trOS.OUA.ES : sisC showhA\ 2.8hf.H x dOr W :ssie \ ( moned.0+ ) \ mim : etinU Disclaimer We made every effort to ensure that the information and procedure in this guide is accurate and complete, no liability can be accepted for any errors or omissions and reserves the right to make any changes without further notices to any products herein. Warning: This is a computer accessory, not a toy.
* Do not mix new and old batteries.
* Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
+ Alkaline batteries are recommended.
+* Battery must be inserted with the correct polarity.
+ Exhausted batteries should be removed from the mouse and disposed of in accordance with the maker's recommendation.
+ Do not contact both terminals with metal parts while batteries are in.
+ For best performance only the recommended batteries or their equivalent are to be used. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may net cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver.
+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
+ Consult the dealer or experienced radio / TV technician for help. I8P WW Disney.com Disney Theme Park Merchandise Lake Buena Vista, FL 32830 Disney Made in China LB. mm cor