BLUE MIRROR User Manual Bluetooth Handsfree Car Kit With Caller ID Display & Phonebook Installation (Multi-point) Notice 1 You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Notice 2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. This equipment complies with FCC radiation exposure limits set forth for an un-
controlled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. V4.0 For Model BTHF010D Contents Overview................................................. Use in car................................................ Detach / Insert the headset..................... Quick User Guide.................................... Getting Started........................................ Charging.................................................. Switching On / Off.................................... Pairing with a phone................................ Connect / Reconnect to phone................ Handsfree functions................................ Phonebook.............................................. Care and maintenance............................ Specification............................................ FCC Notice.............................................. 3 4 5 6-8 9 9 9 10 11 11-12 13-14 15 15 16 Care and Maintenance g Check the laws and regulations on the use of mobile phones and handsfree equipment in the area where you drive. g Always give full attention to driving. In some areas, you are required to pull off the road and park before making or answering a call. g Do not expose the handsfree to extreme temperature or direct sunlight. g Do not expose it to moisture or humidity. Keep it away from any liquid or chemicals. g Do not keep the device in dusty or dirty area. Only use a soft damp cloth to clean it. g Do not attempt to disassemble the handsfree and the chargers. g Do not try to replace the rechargeable battery inside the handsfree. g Charge the handsfree only with the supplied charger. g Travel charger can only be used indoor under normal temperature and humidity. Specification Bluetooth Specification Bluetooth Profile Supported Frequency Range Working Distance Range Dimensions (main unit) Weight LCD Display
: Version 2.0 compliant
: Headset and Handsfree Profiles
: 2.4 GHz spectrum
: 10 Meters (class 2)
: 280(L) x 85(W) x 22(T) mm
: 340 g (main unit), 9.8g (headset)
: Dot matrix rolling display, battery status icon, Phonebook DSP Pairing Charging Time Talking Time Standby Time Rechargeable Battery Battery Protection Input Current Input Voltage Speaker Power Speaker Impedance Sensitivity of Microphone backlight
: Bluetooth wireless download, stores up to 250 records.
: Full duplex transmission, noise suppression and echo cancellation.
: Memorize up to 8 mobile phones simultaneously.
: Within 3 hours
: Up to 12 hours(main unit), 2 hours (headset)
: Up to 200 hours(main unit), 20 hours(headset)
: Lithium-ion, 3.7V, 950 mAh installed(main unit) Lithium-ion, 3.7V, 90 mAh installed(headset)
: Over charge and over discharge protection
: 400 mA (internal controlled)
: DC 5V
: 2W (max)
: 4 ohm
: -60dB Check records / Dial from phonebook 1. In stand by mode, press & hold Volume - button for 2 seconds to enter phonebook menu. 2. LCD displays letter 'A'. This is the 1st level of the menu, click Volume + or Volume - to move to other letters. The phonebook records of the 1st letter of the names are listed from A to Z in alphabetical order. Other symbols are listed in '['. 3. Click Multifunction Key once to enter the desired letter. This is the 2nd level of the menu. The name under the letter and the corresponding number will be shown. Click Volume + or Volume - to move to other names. 4. Click Multifunction Key once to make a call. Menu Structure Press & hold Click Multifunction Key once Volume -
for 2 sec. Bluetooth 1st Level 2nd Level A Ada 12345678 Make Call B Alex 23456789 C Andy 34567890 D Aron 45678901
. . . Z .
[ Barry 56789012 Double click Multifunction Key Exit phonebook Double click Multifunction Key to go back to the pervious menu level or exit the menu.
(When there is an incoming call or making connection/disconnection with phone, the phone book menu will be exited automatically.) Erase all phonebook records 1. Disconnect the phone with BTHF010D. 2. Click together the volume ' + ' and ' - ' bottons once. 3. BTHF010D displays 'Erase?'. Press ' + ' to erase. Press ' - ' to leave. 14 Bluetooth Handsfree Car Kit with Caller ID Display & Phonebook (Multi-point) Overview Model BTHF010D Thank you for selecting BTHF010D Bluetooth handsfree car kit. It is a rechargeable speakerphone which is easy to operate in car. It is specially designed for connecting Bluetooth compatible mobile phones without wires in car. No matter if the car is switched on or not, you can enjoy the freedom of wireless communication. No power connection or connection to the mobile phone is required. Using the single-button control of the handsfree, you can make and answer calls without touching the phone. You can even leave the phone in pocket or anywhere inside the car. With built-in DSP circuit, echo and background noise are cancelled and suppressed effectively. Thus providing clear sound and high quality conversation even in noisy environment. This handsfree car kit is specially designed for Bluetooth mobile phones or other Bluetooth compatible devices that support the Handsfree or Headset profiles. The Bluetooth wireless technology is a worldwide specification for a small form-factor, low-cost and short-range (about 10 meters) radio solution providing links between mobile computers, mobile phones, other portable and handheld devices and connectivity to the internet. Bluetooth icon A Bluetooth icon B Battery icon status LCD display Volume down Volume up Charging port Detachable headset Multifunction Key LED indicator microphone extensible clip Speaker inextensible clip 3 Use in car 1 1. Fix the back of handsfree onto the front of car rear view mirror as shown. 2 2. Make sure the handsfree is tightly attached with the car rear view mirror. 3 3. Switch on the handsfree by pressing and holding Multifunction Key for 3 seconds. 4 4. For private conversation and headset using, pull the headset towards the direction as shown. Phonebook You can wirelessly transfer your phonebook records from your phone to the memory of BTHF010D. In the phonebook menu, you can check the contact name and number and then dial out directly. When there is an incoming call and the number matches the phonebook record, BTHF010D will show the caller name on the LCD. Transfer phonebook records You can transfer a single record or all the records from the phone at one time. Some phone models support single record transfer only. The following are the general operating steps for reference. For details, please refer to the user manual of the phone. Phonebook User Guide 1. Pair and connect BTHF010D with your Bluetooth enabled mobile phone. 2. Disconnect the phone with BTHF010D. 3. Find the target name contact(s) from contact list in your moblie phone. 4. *Select Send Business Card' / 'Send Contact' / Or 'Send All' via Bluetooth. 5. Select HF010D from the Bluetooth device list. 6. BTHF010D will display the name contact(s) you send, and automatically store the name contact(s) into handsfree memory (If you do not have more name contact(s) to send, the last send contact name will stay on the screen for 5 seconds then LCD will show
'BLUETOOTH'.
* May various to different model of mobile phones. Note:
g When the memory (250 records) is full, BTHF010D will not receive any exceed records. g Do not put punctuations for the first letter of the contact names such as "." ";" "\" because they would stop the record transfer process. g Some phone models do not support transferring records from SIM card directly. In such case, copy records from SIM card to phone first. g Don't press any button of BTHF010D during the record transfer process. It will cancel the process. 5 4 5. You can now enjoy handsfree conversation both inside and outside the car. 13 Voice dial Mute microphone Adjust volume Privacy Disconnect with mobile Shut down automatically In standby mode, press Multifunction Key once. You will hear a tone from the handsfree. It indicates the mobile phone is ready to receive voice tag. Speak the name of the person you wish to call. Then the mobile starts the voice dial automatically.
(Ensure the mobile phone supports Voice Control Dialing before use.) To temporarily mute the microphone, click together the volume +
and - buttons once. This will allow you to hear the other side but the other side does not hear you. Press + and - again for un-
mute. Press + or - button to control volume up or down. LCD displays the volume level. Detach the headset from the carkit to initiate the private conversation function. In standby mode, press & hold the + for 2 seconds. This function is for connecting the handsfree to another mobile. To reconnect to the phone, click Multifunction Key once. Hansfree carkit will be switched off automatically if the connection between the mobile phone and the handsfree breaks down for more than 15 minutes.
* Functions Redial the last number, Call waiting and Call transfer are supported by Handsfree Profile instead of Headset Profile. For using those functions, please check if the mobile phone supports Handsfree Profile.
* Function Volume Level is available if the phone supports Remote Volume Control. 12 Detach the headset 1 2 1. Headset is connected to handsfree main unit. 2. Place thumb at the location as shown and pull the headset in the direction indicated. 3. Headset is loosen from handsfree main unit, LCD display turned off. 4. Attach the earhook to the headset and headset can be used. 3 4 Insert the headset 1 2 1. Pull the earhook out from the headset as shown. 2. Put heaset in the slot. Place the thumb at the headset as picture show and push the direction as indicated 3. LCD display turned on and handsfree can be used in car. 3
* After taking the headset out of the handsfree.Please insert the headset after 10 seconds, otherwise the handsfree dysfunction and required to be turned off and on. 5 Quick User Guide Connect / Reconnect to phone Status Switch On Operation Press and hold the Multifunction Key for 3 seconds to turn on the unit. Switch Off Press and hold the Multifunction Key for 5 seconds. Connect /
Reconnect in A side
(with paired phone) In idle mode, press Multifunction Key once OR Select paired device 'HF010D'
on mobile phone, and then select
'Connect'. LED Indicator &
Sound A low to high 'dodo' sou-
nd. Flashes blue every 5 seconds, indicates in idle mode. LCD Display HF010D
BLUETOOTH LED indicator goes off Power Off Flashes blue every 5 seconds indicates searching for paired devices. If connected to mobile with Handsfree Profile, blue always on indicates in standby mode. BLUETOOTH Connecting Display BLUETOOTH Connecting Display
Connect /
Reconnect in B side
(with paired phone) In idle mode, press Volume Key '-'
twice OR Press and hold the Multifunction Key for 2 seconds, Handsfree display 'BLUETOOTH'. Select paired device 'HF010D' on mobile phone, and then select 'Connect'. Flashes green every 5 seconds indicates searching for paired devices. If connected to mobile with Handsfree Profile, green always on indicates in standby mode. Pairing
(for the first time using the handsfree) 1. Switch on the handsfree. 2. Enable Bluetooth feature of the mobile phone. 3. In the Bluetooth menu, select
'add device' or 'search device'. 4. 'HF010D' appears in the device list, press 'yes'. 5. Enter fixed pass key '0000'. Pairing completes. 6. Edit the device name if you would like to personalize it. Flashes blue every 5 seconds, indicates in idle mode. I f c o n n e c t e d w i t h Handsfree Profile, blue always on indicates in standby mode. After the handsfree is switched on, it is in idle mode. It is waiting to be paired or connnected by mobile phone. The LED indicator flashes blue every 5 seconds indicates this mode. When the handsfree and the device are disconnected, the handsfree will return back to idle mode. To connect with phone EITHER To connect with paired phone or reconnect with previously connected phone, click Multifunction Key once. The handsfree will search and connect to the phone nearby automatically. (The LED indicator flashes blue every second indicates the searching mode. The searching may last for 1/2 minute. If no phone can be found, the handsfree will return to idle mode.) To connect with the handsfree through the phone, in the setting menu of the phone, select HF010D from Paired Device. Select connect and the phone will connect to the handsfree. Handsfree Functions When handsfree is ringing, press Multifunction Key once to receive the call. When handsfree is ringing, press Multifunction Key twice to reject the call. A OR B Receive call Reject call BLUETOOTH Connecting Mobile phone model name
, Display A End call During a call, press Multifunction Key once. Transfer to phone
(call transfer) During a call, press & hold Multifunction Key for 2 seconds. To transfer back to handsfree, press Multifunction Key for 2 seconds again. Redial the last number In standby mode, press Multifunction Key twice. The last number will be redialed. 6 11 Pairing with a phone Before using the handsfree, you must pair it with the mobile phone first. Once the handsfree and the phone has paired. they store the ID of each other. Thus they can connect each other automatically. You can check, delete or rename the paired device in the devices list of the mobile phone. 1. Place the Bluetooth handsfree and the Bluetooth mobile phone within a distance of 1 meter. 2. Switch on the Bluetooth mobile phone and enable Bluetooth feature.*If the phone has
'Profile' options, you are recommended to select 'Handsfree Profile' rather than 'Headset Profile'
3. Turn on the handsfree. The LED indicator flashes blue every 5 seconds indicates it is in idle mode. 4. On the Bluetooth mobile, searching for device, 'HF010D' will appear in the device list. 5. Select device 'HF010D' and enter fixed pass key '0000'. Pairing completed. The LED indicator turns blue steadily indicates the handsfree is connected to the phone with Handsfree Profile. 6. Make sure the paired mobile has returned to main menu. 7. The volume is automatically set to middle level. For best performance, press '+' or '-' to adjust a suitable volume level. To pair and connect a second mobile phone With one phone already paired and connected, 1. Press the multi-function button for 2 to 3 seconds until BLUETOOTH appears on the display. 2. Search for Bluetooth devices from your second phone. 3. Select HF010D from the list. 4. Enter the pairing code 0000 when prompted. 5. You should now be paired and connected. The Bluetooth name of your phone should appear on the LCD screen. The LED indicator turns green steadily indicates the handsfree is connected to the phone with Handsfree Profile. Check if the mobile displays any message or icon which indicates the connecting status. After pairing completed, some phones automatically connect to handsfree immediately. Some phones keep waiting for builting up the connection manually. In this case, press Multifunction Key once, BTHF010D will connect to the phone. Or you can select 'HF010D' from the "Paired Device' of the phone. the phone will connect to the handsfree. Please refer to your phone's user manual.
* Handsfree Profile supports Voice dial, Redial the last number, Call waiting and Call transfer functions. If the mobile phone only supports Headset Profile, those functions are not available. 10 Status Pairing for the second phone Operation 1. Press the multi-function button for 2 to 3 seconds until BLUETOOTH appears on the display. 2. Search for Bluetooth devices from your second phone. 3. Select HF010D from the list. LED Indicator &
Sound Flashes green every 5 seconds, indicates in idle mode. 4. Enter fixed pass key '0000'. Pairing completes. 5. Edit the device name if you would like to personalize it. I f c o n n e c t e d w i t h H a n d s f r e e P r o f i l e , g r e e n a l w a y s o n indicates in standby mode. Receive Call When handsfree is ringing, press Multifunction Key once. Reject Call When handsfree is ringing, press Multifunction Key twice. End Call During a call, press Multifunction Key once. Transfer to phone During a call, press & hold Multifunction Key for 3 seconds. To transfer back, select function key on mobile phone. Redial last number In standby mode, press Multi-
function Key twice. Voice dial In standby mode, press Multi-
function Key once.
A tone from the hands-
free indicates the phone is ready to receive voice tag. LCD Display BLUETOOTH Connecting Mobile phone model name
, Display A B Call number
Active Call Reject Mobile phone model name
Redial Dialing
Voice Call Dialing Mute microphone During a call, click together '+'
and '-' buttons once. Click again for un-mute. Adjust Volume Click '+' or '-' button to control the volume up or down. Disconnect with mobile Press & hold '+' for 2 seconds. To reconnect to phone, click Multifunction Key once.
(You can still hear the other side.) MUTE MIC /
UNMUTE MIC
VOL BLUETOOTH 7