FCC ID: AZDK30242 802.11b/g Transmitter Module for Printer

Label position of K30242 1.Label position Surface Side Reverse side I G H J K L A B C D E F Certification Label Serial No. Label 2.Label detail Certification Label 26 8 2 1 1 Serial No. Label Tolerance : 0.5 Unitmm Tolerance : 0.7 Unitmm 20 ABCDEF GHIJKL Bar Code Serial No.

CANON INC. TAMAGAWA PLANT 3-18-1, SHIMONOGE, TAKATSU-KU, KAWASAKI-SHI, KANAGAWA 213-8512, JAPAN PHONE: +81-44-811-2111 FAX: +81~44--814-2856 Letter Of Agency Date: June 28, 2004 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To Whom it May Concer:

Please be advised that CANON INC., Inkjet SFP Safety Regulation Advancement Dept. authorizes UL Apex Co., Ltd. to act on our behalf, until otherwise notified, for applications submitted to Federal Communication Comrfiission. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Sincerely,

~ ze Th ~

f L. Lite 4 wv Kenji Kurita Manager, Inkjet SFP Safety Regulation Advancement Dept. CANON INC. TAMAGAWA PLANT 3-16-1, SHIMONOGE, TAKATSU-KU, KAWASAKI-SHI, KANAGAWA 213-B512. JAPAN PHONE: +81-44.811-2111 FAX: +81-44--814-2856 Request for Confidentiality Date: June 28, 2004 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 RE: Certification Application FCC ID: AZDK30242 Please be advised that the following information is to be held confidential and behalf of, CANON ING., Inkjet SFP Safety Regulation Advancement Dept. Block Diagram Schematics Parts list Theory of Operation Installation Manual The application contains technical information which CANON INC., Inkjet SFP Safety Regulation Advancement Dept. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Vo Pucridae Kenji Kurita Manager, Inkjet SFP Safety Regulation Advancement Dept. CANON INC. TAMAGAWA PLANT Manufacturers Letter Date: June 29, 2004 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 RE: Certification Application FCC ID: AZDK30242 To Whom It May Concern:

Please be advised that the manufacturer will ensure that the above-referenced model will be manufactured in accordance with the FCC Rules and Regulations. Thank you for your attention to this matter. Sincerely, Kenji Kurita Manager, Inkjet SFP Safety Regulation Advancement Dept. CANON INC. TAMAGAWA PLANT 3-18-71, SHIMONOGE, TAKATSU-KU, KAWASAKI-SHI, KANAGAWA 213-8512, JAPAN FCC Labeling Requirements and Information Date: June 29, 2004 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 RE: FCC Labeling Requirements FCC ID: AZDK30242 The following label information is required by the FCC Rules and Regulations for certified devices. Also attached, please find marketing information required by the FCC Rules and Regulations. Thank you for your attention to these matters. Sincerely, _- Kurla Kenji Kurita Manager, Inkjet SFP Safety Regulation Advancement Dept.

oe FUJITSU FCC ID : AZDK30242 Date: July 2, 2004 IC Number : 498C-K30242 Model : K30242 Applicant : CANON INC, Request for Limited Modular Approval The modular transmitter (Model: K30242) is designed by FUJITSU DEVICES INC. This modular transmitter will be equipped only on Printer, which is produced by CANON INC. The modular transmitter complies the module basic requirement (Item 1 to 8 ) in FCC Public Notice: Part 15 Unlicensed Modular Transmitter Approval(DA00-1407) as indicated below:

[Module basic requirement]

(1) Have its own RF shielding.: Thi di ielding. Please refer to the Al Photo. Antenna RF Shielding Al Photo(Modular transmitter)

(2)The modular transmitter must have buffered modulation/data inputs.: Data input to Modular transmitter is controlled as not generating excessive data speed and abnormal modulation.

(3)The modular transmitter must have its own power supply regulation.: This modular transmitter provides stable voltage constantly to RF Module. Please refer to following parts of circuit diagram. IC8: Input 5VGenerate 1.8V IC18: Input 5V~Generate 2.9V IC19: Input 5V~Generate 2.9V 1C20: Input 5V->Generate 3.3V As described above, required voltages (1.8V, 2.9V, 3.3V) are controlled by dedicated IC on the module.

(4)The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c).: The antenna of this equipment is on the circuit board. So, it is impossible for users to disconnect it. Accordingly, it is complied. Please refer to the Al Photo.

(5)The modular transmitter must be tested in a stand alone.: The modular transmitter has been performed the testing as a stand alone and then confirmed the compliance. Please refer to the Test report. (No. 24TE0043)

(6)The modular transmitter must be labeled with its own FCC ID/ IC number, and, if the FCC ID/ IC number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module.: This modular transmitter is complied with this requirement. Please refer to the Label drawing and location and Installation Manual.

(7)The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.: The necessary explanation to be complied with this requirement is contained in the manual.

(8)The modular transmitter must comply with any applicable RF exposure requirements.: Please refer to RF Exposure Statement. eet (yo Hideomi Watanabe Manager, System Solution dept. FUJITSU DEVICES INC.

ANON CANON INC. TAMAGAWA PLANT 3-16-17, SHIMONOGE, TAKATGU-KU, KAWAGAKLSHI, KANAGAWA 215-8512, JAPAN _ PHONE: +81-44-811-2111 FAX: +81-44--814-2858 Request for Short-Term Confidentiality duly 27, 2004 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 RE: Certification Application FCG ID: AZDK30242 Please be advised that the following information is to be held in confidence for 45 days from the date of the Grant of Equipment Authorization and behalf of, CANON INC., Inkjet SFP Safety Regulation Advancement Dept. External Photos Internal Photos Test Setup Photos User's Manual The application contains technical information, which CANON ING, inkjet SFP Safety Regulation Advancement Dept. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, 7. Anita Kenji Kurita Manager, Inkjet SFP Safety Regulation Advancement Dept.