K30316 6-Mar.-2009 Ver.2.1US Confidential Wireless LAN Module IEEE802.11b/g Product No. : K30316 Users Manual 1/16 K30316 Document constituent list Control name General Items Absolute maximum ratings Electrical characteristics Circuit schematic Outline / Appearance Outline / Appearance Mounting Location of Module 6-Mar.-2009 Ver.2.1US Confidential Document Page 1/1 1/1 1/2-2/2 1/1 1/1 1/2-2/2 1/2-2/2 Control No. HD-AG-A******
HD-AM-A******
HD-AE-A******
HD-MC-A******
HD-AD-A******
HD-AD-B******
Rev. record 27-Jan.-2009> Ver.1.0 18-Feb.-2009> Ver.2.0 6-Mar.-2009> Ver.2.1 2/16 K30316 6-Mar.-2009 Ver.2.1US Confidential Control name General Items Control No. HD-AG-A****** (1/1) Scope This specification (Specification) applies to the hybrid IC K30316 for use Wireless LAN module
(Product). 1. Product No. : K30316 2. Function: Radio frequency transfer Module. (IEEE802.11bg standard conformity) 3. Application: Printer 4. Structure: Hybrid IC loaded with silicon monolithic and GaAs semiconductor Ability of lead free mounting at customer's assembly (Heat resistance of this Product) : Yes Containment of hazardrous substance in this Product
*This product conforms to RoHS Directive (2002/95/EC). 5. Outline: 6-pin Connector 6. Marking: Type, MAC address, Lot number 7. Features:
-IEEE802.11b/g standard conformity Transmit speed: 11g (54/48/36/24/18/12/9/6Mbps) 11b (11/5.5/2/1 Mbps) Modulation: 11g (OFDM): BPSK, QPSK, 16QAM, 64QAM 11b (DSSS): BPSK, QPSK, CCK Channel Number: 1 to 11 channels Interface: USB Embedded ARM MPU for reducing loads on host processor Built-in EEPROM (8kbit), OSC (40MHz), Chip Antenna (Monopole antenna), Connector 8. Security: WEP (64/128bit), TKIP (WPA), AES (WPA2) 9. Packing:
Packaging method: Trey 10. Notes:
a. Any question arising from this Specification shall be solved through mutual discussion by the parties b. This Product is not designed for radiation durable and should not be used under the circumstance of hereof. radiation. c. The operating conditions of this Product are as shown in this Specification. d. This Product mentioned in this Specification is manufactured for use in Printer. This Product shall not be used in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added at design stage, all at the customers sole risk. e. Communication between this Product and others might not be established nor maintained depending upon radio environment or operating conditions of this Product and other ISM band at 2.4GHz products. f. This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices. 3/16 K30316 Control No. HD-AM-A****** (1/1) Control name Absolute maximum ratings 6-Mar.-2009 Ver.2.1US Confidential Absolute maximum ratings Item Symbol Supply voltage Storage temperature range Operation range temperature Recommendation operating range Item Supply voltage Unit Rating Typ. Max. 6.0 Vbus
+0.3 100 Degrees C V 25 55 Degrees C Min.
-0.3
-0.3
-40
-5 Remark Vbus PE Tstg Topr Symbol Vbus PE (SL) PE (SH) Rating Typ. Max. 4.0 3.6
0.2 Vbus Min. 3.4
1.1 Unit Remark V Note:
1. Operation temperature range is set to satisfy products electrical characteristics for a short period of time. Refer reliability condition to check the product life cycle if you use this module for a long period of time in the condition other than the Typ. standard. 4/16 K30316 6-Mar.-2009 Ver.2.1US Confidential Control No. HD-AE-A****** (1/2) Control name Electrical characteristics DC Specifications The Specification applies for Topr.= 25 degrees C, Supply voltage=Typical voltage No. 1 Operating Voltage 1 Parameter Condition Min. 2 Operating Voltage 2 Power Enable *1 3 Peak Current1 3 Power consumption1 Continuous (11g/6Mbps) 4 Power consumption2 Burst Tx (11g/54Mbps) 5 Power consumption3 Burst Rx (11g/54Mbps) 6 Power consumption4 Burst Tx (11b/11Mbps) 7 Power consumption5 Burst Rx (11b/11Mbps) Symbol Vbus PE(SL) PE(SH) PEI SL T1 T2 Ip1 Pc1 Pc2 Pc3 Pc4 Pc5 Typ. 3.6
943 663 705 713 618 Max.
0.2 Vbus
370 1080 701 723 802 635 Remark Unit V V uA ms mA mW mW Duty 10.8%
mW mW Duty57.3 %
mW
1.1
-50 500 500
*1) Power Enable pin connected to the Vbus pin and pulled up with 100kohm inside of the module. 5/16 K30316 Control No. HD-AE-A****** (2/2) RF Specifications (WLAN 11g/54Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage No. Parameter 1 RF frequency range 2 TX Power Control name Electrical characteristics Condition SEN MIL ROS1 ROS2 9 Rx sensitivity 10 Maximum Input Level 11 RX Out of band spurious1 12 RX Out of band spurious2 RF Specifications (WLAN 11b/11Mbps, CCK) The Specification applies for Ta=25 degrees C, Supply voltage=Typical voltage No. Parameter 1 RF frequency range 2 TX Power
-20
Condition Symbol Min FREQ 2412 10
-25
-25
Po M1 M2 M3 Ft Ft EVM TOS1 TOS2
1st Side Lobe 2nd Side Lobe 3rd Side Lobe RMS f<2387MHz, 2496.5MHz<f 2387MHz<f<2400MHz, 2483.5MHz<f<2496.5M Hz PER<10%
PER<10%
f<1GHz f>1GHz 1st Side Lobe 2nd Side Lobe Power up Power down Peak f<2387MHz, 2496.5MHz<f 2387MHz<f<2400MHz, 2483.5MHz<f<2496.5M Hz PER<8%
PER<8%
f<1GHz f>1GHz Symbol Min 2412 FREQ 11
-25
Po M1 M2 TU TD Ft EVM TOS1 TOS2 SEN MIL ROS1 ROS2
-10
3 Spectrum Mask 4 Symbol clock tolerance 5 Frequency tolerance 6 EVM 7 TX Out of band spurious1 8 TX Out of band spurious2 3 Spectrum Mask 4 Power up-down rump 5 Frequency tolerance 6 EVM 7 TX Out of band spurious1 8 TX Out of band spurious2 9 Rx sensitivity 10 Maximum Input Level 11 RX Out of band spurious1 12 RX Out of band spurious2 6-Mar.-2009 Ver.2.1US Confidential Typ Max Unit Remark 12 2462 MHz 14
-20
-28
-40 25 25 5.6 dBm dBc dBc dBc ppm ppm
2.5 uW 25 uW
-71
-65
4 20 dBm dBm nW nW Typ Max Unit Remark 13
-85 2462 MHz 15
-30
-50 2 2 25 35 dBm dBc dBc us us ppm
2.5 uW 25 uW
-76 4 20 dBm dBm nW nW 6/16 6-Mar.-2009 Ver.2.1US Confidential Control name Circuit Schematic K30316 Control No. HD-MC-A****** (1/1) Block Diagram r o t c e n n o C 7/16 K30316 Control No. HD-AD-A****** (1/1) Control name Outline/Appearance OUTLINE 30.0+/-0.3 6-Mar.-2009 Ver.2.1US Confidential Unit: mm 3
. 0
3
. 4 2 0
. 8 4.3 4.3Max LABEL 6 5 4 3 2 1 GND Power_Enable USB D+
USB D-
VBUS GND 8/16 K30316 Control No. HD-AD-B****** (1/2) Control name Outline/Appearance Indication label This label is consisted of two sheets. Sheet1-front 4.0 2.5 3.3 19.5
(a) Product Number:K30316 FCC ID:AZDK30316 IC:498C-K30316 Nxxx XXXXXXXXXXX XXXXXXXXXXXXXX WLAN Module MAC: XXXXXXXXXXXX XXXX
(d) QK1-5700-DB01-01 CANON INC. Made in Japan
(e)
(f) 9 6
. 0 4
. 5
. 7 3
. 3
(c) 6-Mar.-2009 Ver.2.1US Confidential Unit: mm 5 2
. 0 5
. 4 3 1 3
. 3
(b) 3-R2.0 4.0 19.5 3.3 9/16 K30316 Control No. HD-AD-B****** (2/2) Control name Outline/Appearance 6-Mar.-2009 Ver.2.1US Confidential Material: PET (UL969)/ Label color: White 10/16 K30316 Control No.
****** (1/2) Control name Mounting Location of Module Mounting Location of Wireless LAN Module ( Example) 6-Mar.-2009 Ver.2.1US Confidential Module is placed inside of the right corner of the printer. Wireless LAN Module 11/16 K30316 Control No.
****** (2/2) Control name Mounting Location of Module How to attach the plate to the module:
6-Mar.-2009 Ver.2.1US Confidential Screw Front When you install the module into your final set, please leave space between the module and the metal plate more than 4mm. (Except the screw-hole areas.) Please do not place metal plate around the antenna area for antenna performance. 12/16 K30316 FCC Regulatory Information 6-Mar.-2009 Ver.2.1US Confidential CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitters radiating structure and the body of the user or nearby persons. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may Cause conditions:
undesired operation. Canada Regulatory Information CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitters radiating structure and the body of the user or nearby persons. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired L'utilisation de ce dispositif est autorise seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l'utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, operation of the device. mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. 13/16 K30316 6-Mar.-2009 Ver.2.1US Confidential R&TTE Directive Information This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. For Italy and France, this device may be limited to USE INDOOR only. Hereby CANON INC. declares that this Wireless LAN Module (Model No.: K30316) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of Conformity may be obtained at;
CANON INC. 451, Tsukagoshi 3-chome, Saiwai-ku, Kawasaki-shi, Kanagawa 212-8530, Japan Telephone No.) 81-44-542-0164; Fax No.) 81-44-548-7524 CAUTION
- Please note that this users manual should not be provided to end-users. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the requirement. 14/16 K30316 6-Mar.-2009 Ver.2.1US Confidential Notice
- At the installation of our Wireless LAN Module (Model No.: K30316) into the device, following information should be provided with end-user under the responsibility of the manufacture who integrates it into their device. The following sentence has to be displayed on the outside of the device in which the module is installed:
"Contains Transmitter Module FCC ID: AZDK30316 / IC ID: 498C-K30316", or "Contains FCC ID:
AZDK30316 / IC ID: 498C-K30316"
FCC Regulatory information CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitters radiating structure and the body of the user or nearby persons. To maintain compliance with FCCs RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may Cause undesired operation. Canada Regulatory information Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. L'utilisation de ce dispositif est autorise seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l'utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitters radiating structure and the body of the user or nearby persons. R&TTE Directive information This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. For Italy and France, this device may be limited to USE INDOOR only. Hereby [Name of manufacture(*)], declares that this [type of equipment(*)] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC
(*) Note: Please write in your company name and type of equipment into [ ]. 15/16 K30316 NCC Regulatory information 6-Mar.-2009 Ver.2.1US Confidential
: XXXyyyLPDzzzz-x (NCC ID) Note:
1. 2. NTC Regulatory information This telecommunication equipment conforms to NTC technical requirement. 16/16