FCC ID: AZDK30374 Wireless LAN Module

by: Canon Inc latest update: 2019-04-26 model: K30374

Four grants have been issued under this FCC ID from 11/28/2016 to 04/26/2019 (this is one of nine releases in 2019 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked warrantee terms, instructions, troubleshooting guides, password defaults, & drivers.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Replacement

on Amazon

Trade-in? Recycling locations

eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 26
1 ~ 2019-04-26 7
2 ~ 2019-04-26 7
3 ~ 2016-11-28 12
4 ~ 2016-11-28 14

app s				submitted / available
1 2 3 4	(Short-Term Confidential) User Manual	Users Manual	pdf	59.57 KiB
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		Test Report	pdf
1 2 3 4		Test Setup Photos	pdf
1 2 3 4		Internal Photos	pdf
1 2 3 4		Test Report	pdf
1 2 3 4		Test Setup Photos	pdf
1 2 3 4	(Short-Term Confidential) External Photo	External Photos	pdf	126.54 KiB
1 2 3 4		Test Setup Photos	pdf
1 2 3 4		Internal Photos	pdf
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		RF Exposure Info	pdf
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		Cover Letter(s)	pdf
1 2 3 4		Test Report	pdf
1 2 3 4		ID Label/Location Info	pdf
1 2 3 4		Test Setup Photos	pdf
1 2 3 4		Test Setup Photos	pdf
1 2 3 4		RF Exposure Info	pdf
1 2 3 4		Test Report	pdf
1 2 3 4		Test Report	pdf

exhibit
download
text

1 2 3 4

(Short-Term Confidential) User Manual

Users Manual

pdf

59.57 KiB

User Manual Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification

(installation procedure). The following information must be indicated on the host device of this module;

[for FCC]

Contains Transmitter Module FCC ID: AZDK30374 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

*If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual.

[for IC]

Contains IC: 498C-K30374 The following statements must be described on the user manual of the host device of this module;

[for FCC]

FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body.

[for IC]

This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) lappareil ne doit pas produire de brouillage;

2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 5150-5350 MHz band is restricted to indoor operation only. La bande 5150-5350 MHz est restreinte une utilisation lintrieur seulement. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz, et ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement doit tre install et utilis en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain . Frequency tolerance25 ppm

exhibit
download
text

1 2 3 4

(Short-Term Confidential) External Photo

External Photos

pdf

126.54 KiB

		frequency	equipment class	purpose
1	2019-04-26	2412 ~ 2462	DTS - Digital Transmission System	Class II permissive change or modification of presently authorized equipment
2		5745 ~ 5825	NII - Unlicensed National Information Infrastructure TX
3	2016-11-28	2412 ~ 2462	DTS - Digital Transmission System	Original Equipment
4		5745 ~ 5825	NII - Unlicensed National Information Infrastructure TX

Application Forms

app s	Applicant Information
1 2 3 4	Effective	2019-04-26
1 2 3 4	Effective	2016-11-28
1 2 3 4	Applicant's complete, legal business name	Canon Inc
1 2 3 4	FCC Registration Number (FRN)	0019844539
1 2 3 4	Physical Address	16-1, Shimonoge 3-chome
1 2 3 4		Takatsu-ku, Kawasaki-shi, Kanagawa, N/A 213-8512
1 2 3 4		Japan

app s	TCB Information
1 2 3 4	TCB Application Email Address	e******@ul.com
1 2 3 4	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2 3 4	Grantee Code	AZD
1 2 3 4	Equipment Product Code	K30374

app s	Person at the applicant's address to receive grant or for contact
1 2 3 4	Name	Y**** F******
1 2 3 4	Title	General Manager
1 2 3 4	Telephone Number	81-44********
1 2 3 4	Fax Number	81-44********
1 2 3 4	E-mail	f******@mail.canon

app s	Technical Contact
1 2 3 4	Firm Name	UL Japan, Inc.
1 2 3 4	Name	S****** T****
1 2 3 4	Name	A** H****
1 2 3 4	Physical Address	1-22-3 Megumigaoka, Hiratsuka-shi
1 2 3 4		Kanagawa-ken, 259-1220
1 2 3 4		Japan
1 2 3 4	Telephone Number	81-46********
1 2 3 4	Fax Number	81-46********
1 2 3 4	E-mail	S******@ul.com
1 2 3 4	E-mail	A******@ul.com

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2 3 4	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3 4	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
1 2 3 4		Yes
1 2 3 4	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	05/28/2017
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4	Is this application for software defined/cognitive radio authorization?	No
1 2 3 4	Equipment Class	DTS - Digital Transmission System
1 2 3 4	Equipment Class	NII - Unlicensed National Information Infrastructure TX
1 2 3 4	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	Wireless LAN Module
1 2 3 4	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2 3 4	Modular Equipment Type	Limited Single Modular Approval
1 2 3 4	Purpose / Application is for	Class II permissive change or modification of presently authorized equipment
1 2 3 4	Purpose / Application is for	Original Equipment
1 2 3 4	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2 3 4	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2 3 4	Grant Comments	Class II Permissive Change. Limited Modular Approval. Output power listed is Conducted(Peak). This device has a 20 MHz and 40 MHz bandwidth mode. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.
1 2 3 4		Class II Permissive Change. Limited Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For OEM integration only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.
1 2 3 4		Limited Modular Approval. Output power listed is Conducted(Peak). This device has a 20 MHz and 40 MHz bandwidth mode. For OEM integration only - device cannot be sold to general public.Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
1 2 3 4		Limited Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For OEM integration only - device cannot be sold to general public.Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.
1 2 3 4	Is there an equipment authorization waiver associated with this application?	No
1 2 3 4	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2 3 4	Firm Name	UL Japan, Inc.
1 2 3 4	Firm Name	UL Japan, Inc. Shonan EMC EMC Lab.
1 2 3 4	Name	I** I****
1 2 3 4	Name	T****** H**
1 2 3 4	Telephone Number	81-46********
1 2 3 4	Telephone Number	+81-5********
1 2 3 4	Fax Number	81-46********
1 2 3 4	Fax Number	+81 5********
1 2 3 4	E-mail	I******@ul.com
1 2 3 4	E-mail	T******@jp.ul.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C	CC	2412.00000000	2462.00000000	0.1331000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15E	38 CC	5180	5320	0.0103
2	2	15E	38 CC	5500	5700	0.0106
2	3	15E	38 CC	5745	5825	0.011
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
3	1	15C	CC	2412.00000000	2462.00000000	0.1331000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
4	1	15E	38 CC	5180	5320	0.0103
4	2	15E	38 CC	5500	5700	0.0106
4	3	15E	38 CC	5745	5825	0.011

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details