|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7 8 9
|
Effective |
2024-10-16
|
|
1 2 3 4 5 6 7 8 9
|
2024-05-28
|
|
1 2 3 4 5 6 7 8 9
|
2022-09-01
|
|
1 2 3 4 5 6 7 8 9
|
2020-04-06
|
|
1 2 3 4 5 6 7 8 9
|
Applicant's complete, legal business name |
Canon Inc.
|
|
1 2 3 4 5 6 7 8 9
|
Canon Inc
|
|
1 2 3 4 5 6 7 8 9
|
FCC Registration Number (FRN) |
0032593667
|
|
1 2 3 4 5 6 7 8 9
|
0013791678
|
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
16-1, Shimonoge 3-chome, Takatsu-ku
|
|
1 2 3 4 5 6 7 8 9
|
16-1, Shimonoge 3-chome
|
|
1 2 3 4 5 6 7 8 9
|
Kawasaki-shi, Kanagawa, N/A 213-8512
|
|
1 2 3 4 5 6 7 8 9
|
Kawasaki-shi, Kanagawa, N/A
|
|
1 2 3 4 5 6 7 8 9
|
Takatsu-ku, Kawasaki-shi, Kanagawa, N/A
|
|
1 2 3 4 5 6 7 8 9
|
Japan
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7 8 9
|
TCB Application Email Address |
L******@ul.com
|
|
1 2 3 4 5 6 7 8 9
|
e******@ul.com
|
|
1 2 3 4 5 6 7 8 9
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7 8 9
|
Grantee Code |
AZD
|
|
1 2 3 4 5 6 7 8 9
|
Equipment Product Code |
241
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7 8 9
|
Name |
G**** S****
|
|
1 2 3 4 5 6 7 8 9
|
Y****** F********
|
|
1 2 3 4 5 6 7 8 9
|
Title |
General Manager
|
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
81-44********
|
|
1 2 3 4 5 6 7 8 9
|
81-44********
|
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
81-44********
|
|
1 2 3 4 5 6 7 8 9
|
E-mail |
c******@mail.canon
|
|
1 2 3 4 5 6 7 8 9
|
f******@mail.canon
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
UL Japan, Inc.
|
|
1 2 3 4 5 6 7 8 9
|
Name |
T****** I****
|
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
1-22-3 Megumigaoka, Hiratsuka-shi
|
|
1 2 3 4 5 6 7 8 9
|
Kanagawa-ken, 259-1220
|
|
1 2 3 4 5 6 7 8 9
|
Japan
|
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
81-46********
|
|
1 2 3 4 5 6 7 8 9
|
+8146********
|
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
81-46********
|
|
1 2 3 4 5 6 7 8 9
|
E-mail |
T******@ul.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 8 9 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 9 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 9 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/15/2025 |
| 1 2 3 4 5 6 7 8 9 | 06/05/2024 |
| 1 2 3 4 5 6 7 8 9 | 03/01/2023 |
| 1 2 3 4 5 6 7 8 9 | 10/04/2020 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 8 9 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 8 9 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 7 8 9 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 8 9 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 8 9 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless module |
| 1 2 3 4 5 6 7 8 9 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 7 8 9 | Modular Equipment Type | Limited Single Modular Approval |
| 1 2 3 4 5 6 7 8 9 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 6 7 8 9 | Class II Permissive Change |
| 1 2 3 4 5 6 7 8 9 | Original Equipment |
| 1 2 3 4 5 6 7 8 9 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 8 9 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 8 9 | Grant Comments | Class II Permissive Change to add specific portable configuration host described in the filing. Limited Modular Approval. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Output power listed is Conducted. This device has a 20 MHz, 40MHz and 80 MHz bandwidth mode. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Digital Camera: DS126938). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. Host integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. This module can only be used with a host antenna circuit trace layout design in strict compliance with the integration instructions provided.
The highest reported SAR for Body-worn and Simultaneous transmission exposure conditions under this FCC ID are 0.79 W/kg and 0.87 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 9 | Class II Permissive Change to add specific portable configuration host described in the filing. Limited Modular Approval. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Output power listed is Conducted(Peak). This device has a 20 MHz and 40 MHz bandwidth mode for WLAN, 1 MHz and 2 MHz bandwidth mode for Bluetooth Low Energy. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Digital Camera: DS126938). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. Host integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the integration instructions provided.
The highest reported SAR for Body-worn and Simultaneous transmission exposure conditions under this FCC ID are 0.79 W/kg and 0.87 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 9 | Class II Permissive Change to add specific portable configuration host described in the filing. Limited Modular Approval. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Output power listed is Conducted(Peak). This device has a 20 MHz and 40 MHz bandwidth mode for WLAN. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Digital Cinema Camera : ID0177). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. Host integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the integration instructions provided.
The highest reported SAR value is 0.79 W/kg : Body-worn. |
| 1 2 3 4 5 6 7 8 9 | Class II Permissive Change to add specific portable configuration host described in the filing. Limited Modular Approval. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Output power listed is Conducted. This device has a 20 MHz, 40MHz and 80 MHz bandwidth mode. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Digital Cinema Camera : ID0177). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. Host integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. This module can only be used with a host antenna circuit trace layout design in strict compliance with the integration instructions provided.
The highest reported SAR value is 0.79 W/kg : Body-worn. |
| 1 2 3 4 5 6 7 8 9 | Class II Permissive Change to add specific portable configuration host described in the filing. Limited Modular Approval. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Output power listed is Conducted. This device has a 20 MHz, 40MHz and 80 MHz bandwidth mode. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Digital Camera : DS126861). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
The highest reported SAR value is 0.68 W/kg : Body-worn. |
| 1 2 3 4 5 6 7 8 9 | Class II Permissive Change to add specific portable configuration host described in the filing. Limited Modular Approval. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Output power listed is Conducted(Peak). This device has a 20 MHz and 40 MHz bandwidth mode for WLAN. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Digital Camera : DS126861). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
The highest reported SAR value is 0.68 W/kg : Body-worn. |
| 1 2 3 4 5 6 7 8 9 | Limited Modular Approval. Output power listed is Conducted(Peak). This device has a 20 MHz and 40 MHz bandwidth mode for WLAN. For OEM integration only - device cannot be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Digital Camera : DS126836). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
The highest reported SAR value is 0.42 W/kg : Body-worn. |
| 1 2 3 4 5 6 7 8 9 | Limited Modular Approval. Output power listed is Conducted. This device has a 20 MHz, 40MHz and 80 MHz bandwidth mode. For OEM integration only - device cannot be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Digital Camera : DS126836). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
The highest reported SAR value is 0.42 W/kg : Body-worn. |
| 1 2 3 4 5 6 7 8 9 | Limited Modular Approval. Output power listed is Conducted(Peak). For OEM integration only - device cannot be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Digital Camera : DS126836). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
The highest reported SAR value is 0.42 W/kg : Body-worn. |
| 1 2 3 4 5 6 7 8 9 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 8 9 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
UL Japan, Inc. SHONAN EMC LABORATORY
|
|
1 2 3 4 5 6 7 8 9
|
UL Japan, Inc.
|
|
1 2 3 4 5 6 7 8 9
|
Name |
A**** H******
|
|
1 2 3 4 5 6 7 8 9
|
I****** I****
|
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
81-46********
|
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
81-46********
|
|
1 2 3 4 5 6 7 8 9
|
E-mail |
A******@ul.com
|
|
1 2 3 4 5 6 7 8 9
|
I******@ul.com
|
|