CM13264 WLAN MODULE UNIT Installation Manual Module dimension here are 3 holes on modules to fix module in host Application like DSC and printer. T The 3 holes are insulated from Modules. FPC connector Part name of FPC connector on module is FH26-41S-0.3SHW(10). FPC which connects module and host application has to be designed to adapted for FH26-41S-0.3SHW(10). Pin layout of FH26-41S-0.3SHW(10) on module is shown below. Pin description is below No. Pin Name I/O Type Description 1 GND 2 GND 3 GND 4 GND 5 WEn 6 OEn
I I Connect to GND Connect to GND Connect to GND Connect to GND Connect to CF card #36 (WEn) Internally 100kohm Pull up. Connect to CF card #9 (OEn) Internally 100kohm Pull up. 7 D[12]
I/O Connect to CF card #28 (D[12]) Internally 100kohm Pull up. 8 IREQn O Connect to CF card #37 (IREQn) Internally 100kohm Pull up. 9 D[03]
10 D[04]
11 D[11]
12 D[05]
13 D[15]
14 D[06]
I/O I/O I/O I/O I/O I/O Connect to CF card #2 (D[03]) Internally 100kohm Pull up. Connect to CF card #3 (D[04]) Internally 100kohm Pull up. Connect to CF card #27 (D[11]) Internally 100kohm Pull up. Connect to CF card #4 (D[05]) Internally 100kohm Pull up. Connect to CF card #31 (D[15]) Internally 100kohm Pull up. Connect to CF card #5 (D[06]) Internally 100kohm Pull up. 15 A[09]
16 D[07]
I Connect to CF card #10 (A[09]) Internally 100kohm Pull up. I/O Connect to CF card #6 (D[07]) Internally 100kohm Pull up. 17 WAITn O Connect to CF card #42 (WAITn) Internally 100kohm Pull up. 18 CE[1]n 19 A[08]
20 D[13]
21 D[14]
22 IORDn 23 A[07]
24 IOWRn 25 A[06]
26 D[02]
27 A[04]
28 A[05]
29 D[01]
30 A[03]
31 D[00]
32 A[02]
33 D[10]
34 D[08]
35 A[01]
I I I/O I/O I I I I Connect to CF card #7 (CE[1]n) Internally 100kohm Pull up. Connect to CF card #11 (A[08]) Internally 100kohm Pull up. Connect to CF card #29 (D[13]) Internally 100kohm Pull up. Connect to CF card #30 (D[14]) Internally 100kohm Pull up. Connect to CF card #34 (IORDn) Internally 100kohm Pull up. Connect to CF card #12 (A[07]) Internally 100kohm Pull up. Connect to CF card #35 (IOWRn) Internally 100kohm Pull up. Connect to CF card #14 (A[06]) Internally 100kohm Pull up. I/O Connect to CF card #23 (D[02]) Internally 100kohm Pull up. I I Connect to CF card #16 (A[04]) Internally 100kohm Pull up. Connect to CF card #15 (A[05]) Internally 100kohm Pull up. I/O Connect to CF card #22 (D[01]) Internally 100kohm Pull up. I Connect to CF card #17 (A[03]) Internally 100kohm Pull up. I/O Connect to CF card #21 (D[00]) Internally 100kohm Pull up. I Connect to CF card #18 (A[02]) Internally 100kohm Pull up. I/O Connect to CF card #49 (D[10]) Internally 100kohm Pull up. I/O Connect to CF card #47 (D[08]) Internally 100kohm Pull up. I Connect to CF card #19 ([A1]) Internally 100kohm Pull up. 36 D[09]
I/O Connect to CF card #48 (D[09]) Internally 100kohm Pull up. 37 RESET 38 PDn 39 VDD 40 VDD 41 VDD I I
Connect to CF card #41 (Reset), Active High, Internally 100kohm Pull down. Assert L to enter Power Save mode. Internally 200kohm Pull up. Connect to 3.3V Connect to 3.3V Connect to 3.3V Recommended FPC Dimension B =11.4 C=12.0 F=12.6 All dimension: mm Recommended FPC Construction FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTICE The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR). IC WARNING
(This device complies with Part 15 of FCC Rules.) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. Declaration of conforming to R&TTE requirement esky [Czech]
Murata Manufacturing Co., Ltd. tmto prohlauje, e tento CM13264 je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Dansk [Danish]
Undertegnede Murata Manufacturing Co., Ltd. erklrer herved, at flgende udstyr CM13264 overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Deutsch [German]
Hiermit erklrt Murata Manufacturing Co., Ltd., dass sich das Gert CM13264 in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian]
Kesolevaga kinnitab Murata Manufacturing Co., Ltd. seadme CM13264 vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. English Hereby, Murata Manufacturing Co., Ltd., declares that this CM13264 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Espaol [Spanish]
Por medio de la presente Murata Manufacturing Co., Ltd. declara que el CM13264 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
[Greek]
Murata Manufacturing Co., Ltd. CM13264 1999/5/. Franais [French]
Par la prsente Murata Manufacturing Co., Ltd. dclare que l'appareil CM13264 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian]
Con la presente Murata Manufacturing Co., Ltd. dichiara che questo CM13264 conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian]
Ar o Murata Manufacturing Co., Ltd. deklar, ka CM13264 atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi [Lithuanian]
iuo Murata Manufacturing Co., Ltd. deklaruoja, kad is CM13264 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch]
Hierbij verklaart Murata Manufacturing Co., Ltd. dat het toestel CM13264 in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese]
Hawnhekk, Murata Manufacturing Co., Ltd., jiddikjara li dan CM13264 jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian]
Alulrott, Murata Manufacturing Co., Ltd. nyilatkozom, hogy a CM13264 megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Portugus [Portuguese]
Murata Manufacturing Co., Ltd. declara que este CM13264 est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Slovensko [Slovenian]
Murata Manufacturing Co., Ltd. izjavlja, da je ta CM13264 v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Slovensky [Slovak]
Murata Manufacturing Co., Ltd. tmto vyhlasuje, e CM13264 spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Suomi [Finnish]
Murata Manufacturing Co., Ltd. vakuuttaa tten ett CM13264 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish]
Hrmed intygar Murata Manufacturing Co., Ltd. att denna CM13264 str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. slenska [Icelandic]
Hr me lsir Murata Manufacturing Co., Ltd. yfir v a CM13264 er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 1999/5/EC. Norsk [Norwegian]
Murata Manufacturing Co., Ltd. erklrer herved at utstyret CM13264 er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF.