FV-100
(RMN : PG1001) DIGITAL STILL IMAGE VIDEO CAMERA USER MANUAL FOR COMPLIANCE USE SAFETY INFORMATION READ BEFORE USE Please read the following instructions and safety precautions before using the device. For regulatory and additional safety information, refer to the Regulation and Warranty Information sheet included in your package contents. RMN: PG1001 Regulatory Model Identification Number is assigned for regulatory identification purpose. WARNING or accident. behaves abnormally. Keep away from children and infants. Improper use of this product may cause suffocation Stop using the device immediately if it emits smoke or a strange smell, or otherwise A strap wound around a childs neck may result in asphyxiation. If your product uses a power cord, mistakenly winding the cord around a childs neck may result in asphyxiation. Turn the device off in places where camera use is prohibited. The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the product in places where use of electronic devices is restricted, such as inside airplanes and medical facilities. This product is embedded with magnets. Please be careful if implant electronic devices
(such as cardiac pacemaker) nearby, as magnets may cause malfunctions. If this happens, please distance the magnet from the implant electronic device and consult the doctor at once. CAUTION Please charge the device at the recommended temperature of 59 to 90F (15 to 32C). Use and keep the device in the recommended environment of 59 to 90 F (15 to 32 C). IP68 water resistance test is performed in fresh water under standby mode. Avoid exposing the device to non-fresh water such as salt water, chlorinated water, and drinks. Avoid using the device during water activities like swimming, scuba diving, water skiing. If the device gets dirt or is exposed to non-fresh water accidentally, rinse it with fresh water and dry it completely with a soft, dry cloth. Keep the memory card and micro USB slot cover firmly closed to avoid water, dust and other particles from entering the inside of the device. Make sure your device is dry before open the cover. The device has a shockproof to 2M (6.5 ft.). However, strong impacts could scratch the device and cause it to malfunction. Be careful to avoid expose it to excessive shocks. Never expose the battery to high temperatures, direct heat, or dispose by incineration. Electromagnetic interference or electrostatic discharge may cause the device to malfunction or the memory to be lost or altered. Should this occur, use a pin, or similar item to press the [RESET] button at the backside of the device for more than 10 seconds. If the device is not functioning properly, please contact the dealer you purchased this product from or Canon Service & Support at www.usa.canon.com/support Do not dry the device with an external heat source such as microwave oven and hair dryer. 2 GETTING STARTED CHARGING MODE LED Charging: Red Full: Green Press on the upward button and slide the MicroSD card cover upward to open it. Insert the smaller end of the supplied USB cable into the device and other end into a chargeable USB adapter. The Mode LED will turn red to indicate charging. Once fully charged, the Mode LED will turn green.
- Operating time may vary depending on the battery status, operational status and environment conditions. INSERTING SD CARD An external MicroSD card (up to 256 GB) is needed for saving captured photos. Only FAT16, FAT32 and exFAT format are supported. PREPARING A MEMORY CARD Use the following memory cards (sold separately) MicroSD memory cards *1 MicroSDHC memory cards *1 *2 MicroSDXC memory cards *1 *2
*1 Cards conforming to SD standards. However, not all memory cards have been verified to work with the camera.
*2 UHS-I memory cards are also supported. INSTALL AND REMOVE THE MICROSD CARD Open the MicroSD Card Cover Insert the MicroSD card into the slot at the bottom of the device. You will feel a slight click when the card is fully inserted . Push on the top of the card to release it. Gently pull to fully remove the card from the device. and restart the device. If there is an error on reading /writting to the MicroSD card. Remove the MicroSD card Connect the device to a computer by USB cable. Double-click the external drive image when it appears on the computer to view and save the photos. 3 CAMERA MODES Your camera has below five modes. Mode OFF Photo Video Multi Wireless Short Explanation Powered off Take photos Record video Take photos or record videos with different shutter operation. Connect with Smartphone for remote control, file access in SD card, etc. OFF MODE The device is powered off. Status LED Mode LED AUTO POWER OFF User can resume the device by pressing the Shutter button or turning the Mode Dial Switch to any mode except off. User can change the time (3 minutes / 5 minutes / 10 minutes) in the App. PHOTO MODE Press shutter once to capture single photo. Hold the shutter for several seconds to shoot continuously. (4fps) 4 LED INDICATIONS Status LED Mode LED Status Mode LED Status LED Green Off Red Red Green Powered On & Standby
(Photo/Video/Multi/
Wireless Modes) Powered Off/
Auto-Power off Low Battery Charging Fully charged Bluetooth pairing WiFi connected Photo captured and saved Video recording Mass Storage mode Data transferring under Mass Storage mode Firmware updating Green > Red (Looping) Green Red (Blink once) Red (Blink slowly) Green Green (Blink rapidly) Green (Blink slowly) 5 SPECIFICATIONS Photo Resolution 13MP 1080p60fps (except Wireless Mode) 1080p30fps 720p60fps Fixed Video Resolution Zoom Focal Length Aperture Focusing Range Sensitivity White Balance Exposure Adjustment Memory Card XXX XXX XXX XXX Auto Auto MicroSD / MicroSDHC / MicroSDXC Memory Cards, up to 256GB Microphone Mono Power Source Built-in Rechargeable lithium polymer Battery, 660mAh, 3.8V Charging Speed XXX Power Adapter Output current: 1A (min) Environment Parameters Automatically Power-Off Voltage:
Operating Temperature: 14 F to 104 F (-10 C to 40 C) 5V Recommended Operating, Charging and Storage Temperature: 59 F to 90 F (15 C to 32 C) 3 mins / 5 mins / 10 mins (selectable in-app) Dimension 4.4 (W) x 1.8 (H) x 0.7 (D) Weight 110.5 mm (W) x 45.2 mm (H) x 18.5 mm (D) XXX Compatible OS (for computer) Windows 7 / 8 / 8.1 / 10 Mac OSX 10.10-10.14 Connectivity Bluetooth 4.2 Compatible OS iOS 11 or above & Android 5.1 or above Mobile Application Canon Mini Cam Connection for Charging and Data Transfer USB 2.0 (Micro USB) 6 FV-100 Please vist https://global.canon/mppmanual for detail user manual ENGLISH RMN : PG1001 Regulatory Model Identification Number is assigned for regulatory identification purpose. FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Statement to the User : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. FRANAIS RMN : PG1001 Le numro d'identification du modle rglementaire est attribu des fins d'identification rglementaire. RGLEMENT DE LA FCC Cet appareil est conforme la partie 15 du rglement de la FCC. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage prjudiciable; et
(2) lappareil doit accepter tout brouillage subi, mme si le brouillage est susceptible den compromettre le fonctionnement. MISE EN GARDE : Tout changement ou toute modification apport(e) cette unit qui na pas t approuv(e) expressment par la partie voyant sa conformit risque d'annuler l'autorisation de l'utilisateur faire fonctionner l'quipement. Dclaration de la FCC l'utilisateur : Cet quipement a t test et dclar conforme aux limites pour un appareil numrique de classe B, conformment la partie 15 du rglement de la FCC. Ces limites sont conues pour offrir une protection raisonnable contre le brouillage prjudiciable dans une installation rsidentielle. Cet quipement produit, utilise et peut mettre de l'nergie de frquence radio et, s'il n'est pas install et utilis conformment aux instructions, peut occasionner un brouillage prjudiciable aux communications radio. Cependant, il n'existe aucune garantie l'effet qu'une installation particulire ne produira aucun brouillage. Si cet quipement produit un brouillage prjudiciable la rception radiophonique ou tlvisuelle, ce que vous pouvez dterminer en teignant et rallumant l'quipement, nous encourageons l'utilisateur essayer de corriger le brouillage laide d'une ou de plusieurs des faons suivantes :
Rorienter ou repositionner l'antenne de rception. Augmenter la sparation entre l'quipement et le rcepteur. Brancher l'quipement dans la prise d'un circuit autre quecelui auquel le rcepteur est branch. Battery Caution / Prcautions relatives la pile /
Precaucin con la Batera (For U.S.A Only) U.S.A and Canada only The lithium ion/polymer battery is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. EN FR ES Les Etats-Unis et le Canada seulement La batterie aux ons de lithium est recyclable. Pour obtenir des renseignements sur les faons de recycler cette batterie, veuillez appeler au 1-800-8-BATTERY. Los EE.UU. y Canad solamente La batera de ion de litio es reciclable. Llame por favor 1-800-8-BATTERY para la informacin sobre cmo reciclar esta batera. Consult the dealer or an experienced radio/TV technician for help. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Radiation Exposure Statement :
This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: Y7J-PG1001. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and be positioned a minimum of 0.5cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 0.5cm from your body when the device is switched on. WARRANTY : 1 year limited warranty. For full terms and conditions, visit www.usa.canon.com/support (For USA Customer) www.canon.ca/support (For Canada Customer) toute assistance. Consulter le distributeur ou un technicien radio/TV expriment pour N'apportez aucun changement ou aucune modification l'quipement moins que le manuel le/la spcifie. Si vous faites pareil changement ou pareille modification, vous pourriez avoir arrter dutiliser l'quipement. GARANTIE : Garantie limite d'un an. Pour toutes les conditions et modalits, visitez www.usa.canon.com/support (Pour les tats-Unis) www.canon.ca/support (Pour le client du Canada) Conformit au Canada Dclaration d'exposition aux radiations RF Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage; et
(2) lappareil doit accepter tout brouillage, mme si le brouillage est susceptible de compromettre le fonctionnement de l'appareil . Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. Ce dispositif a t test pour la conformit avec les valeurs SAR un fonctionnement typique prs du corps . Pour assurer que les niveaux d'exposition aux radiofrquences en de des niveaux tests , utiliser des accessoires avec cet quipement pour maintenir une distance de sparation minimale de 0.5 cm entre le corps de l'utilisateur et l'appareil. Ces accessoires ne doivent pas contenir des composants mtalliques . Il est possible que les accessoires utiliss prs du corps qui ne rpondent pas ces exigences ne sont pas compatibles avec les limites SAR et il est conseill d'viter de les utiliser. Federal Telecommunications Law (IFT) (For Mexico only) La operacin de este equipo est sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. perjudicial y Warranty / Garanta / Garantia (For Latin America Only) EN ES PT 1 year limited warranty. For full terms and conditions, visit https://www.cla.canon.com/support
(for Latin America Countries) 1 ao de garanta limitada. Para ms detalles de los trminos y condiciones, visite https://www.cla.canon.com/soporte
(para pases de Amrica Latina) 1 ano de garantia limitada. Para obter todos os termos e condies, visite https://www.cla.canon.com/support
(para pases da Amrica Latina). Canada Compliance RF Radiation Exposure Statement
"This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device."
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This device has been tested for compliance with IC SAR values at a typical operating near the body. To ensure that RF exposure levels below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 0.5 cm between the body of the user and the device. These accessories should not contain metallic components. It is possible that the accessories used close to the body that do not meet these requirements are not consistent with the SAR limits and it is advisable to avoid using them. PMN : Digital Still Image Video Camera Internal rechargeable battery 660 mAh Li-Polymer 3.8 V SPECIFICATIONS Power Source:
Connectivity: Bluetooth 4.2 Operating Temperature: 14 to 104F (10 to 40C) Recommended Operating and Charging Temperature: 59 to 90F (15 to 32C) Dimension: 4.4"(W) x 1.8" (H) x 0.7" (D) /
Weight: 3 oz (90 g) Automatic Power-off: 3 minutes / 5 minutes / 10 minutes (selectable In-App) NOTE: All specifications are subject to change without notice. 110.5 mm (W) x 45.2 mm (H) x 18.5 mm (D) PMN : Camra vido numrique image fixe SPCIFICATIONS Alimentation : Pile rechargeable interne 660 mAh Li-Polymer 3,8 V Connectivit : Bluetooth 4.2 Temprature d'utilisation : 14 104 F (10 40 C) Temprature de fonctionnement et de charge recommande :
59 90 F (15 32 C) Dimensions : 4,4 po (L) x 1,8 po (H) x 0,7 po (P) /
Poids : 3 oz (90 g) Mise hors tension automatque : 3 minutes / 5 minutes / 10 minutes REMARQUE : Toutes les spcifications sont susceptibles dtre modifies sans pravis. 121 mm (L) x 80,3 mm (H) x 21,5 mm (P)
(slection dans lappli) ESPAOL No realice cambios ni modificaciones al equipo salvo que as se especifique en el manual. Si se realizan cambios o modificaciones, es posible que se le solicite que no contine operando el equipo. RMN : PG1001 El Nmero de Identificacin del Modelo Regulatorio se asigna para fines de identificacin reglamentaria. Regulaciones de la FCC Este dispositivo cumple con la Parte 15 de las reglas de la Comisin Federal de Comunicaciones (Federal Communications Commission, FCC). La utilizacin de este equipo est sujeta a las dos condiciones siguientes:
(1) Este dispositivo no causa interferencia perjudicial y
(2) este dispositivo debe aceptar cualquier interferencia, incluso toda interferencia que pueda causar un funcionamiento no deseado. ADVERTENCIA: Los cambios y las modificaciones a esta unidad que no estn expresamente aprobadas por la parte responsable de cumplimiento pueden anular el permiso del usuario para utilizar el equipo. Declaracin de la FCC para el usuario: Este equipo se prob y cumpli con los lmites para un dispositivo digital clase B, conforme a la Parte 15 de las reglas de la FCC. Estos lmites estn diseados para brindar una proteccin razonable frente a interferencia perjudicial en un establecimiento residencial. Este equipo genera, usa y puede irradiar energa de radiofrecuencia y, si no se instala y usa de acuerdo con las instrucciones, puede causar interferencia perjudicial a las radiocomunicaciones. Sin embargo, no existe garanta de que la interferencia ocurrir en un establecimiento en particular. Si este equipo causa interferencia perjudicial a la recepcin de radio o televisin, que se puede determinar al encender y apagar el equipo, se recomienda que el usuario intente corregir la interferencia mediante una de las siguientes medidas:
Orientar o ubicar de nuevo la antena de recepcin Aumentar el espacio de separacin entre el equipo y la recepcin Conectar el equipo a una salida en un circuito diferente al circuito en el cual est conectada la recepcin Consultar al proveedor o a un tcnico de radio/TV con experiencia para obtener ayuda RMN : PG1001 O nmero de identificao regulatrio do modelo atribudo para fins de identificao regulatria. lquidos. CUIDADO possam bloque-las. de eletricidade esttica. Tome as precaues devidas antes de manusear a impressora. Em reas com baixa umidade, a impressora pode produzir uma carga Mantenha a impressora longe de lquidos ou recipientes contendo Mantenha as aberturas de ventilao longe de quaisquer objetos que No desmonte a impressora sob quaisquer circunstncias.Se o produto no estiver funcionando corretamente, contate o distribuidor do qual voc adquiriu este produto ou a assistncia da Canon. No descarte o produto inadequadamente pois ele pode causar No a manuseie a impressora prximo a equipamento mdico eltrico. Este produto emite magnetismo fraco. No o coloque prximo a A desmontagem da bateria pode causar vazamento, exploso, danos ou No use a impressora se a bateria ou o produto estiver dilatado. Nunca exponha a bateria a temperatura alta, calor direto ou descarte-a Descarte imediatamente a bateria se ela estiver exposta e nunca permita ferimentos ou danos s pessoas. Descarte este produto de acordo com as regulamentaes locais. dispositivos implantados, tais como um marca-passo cardaco. Consulte o seu mdico se a impressora ficar prxima a um dispositivo deste tipo. que crianas entrem em contato com a bateria. ferimentos s pessoas. por incinerao. GARANTA: Garanta limitada de 1 ao. Para conocer todos los trminos y condiciones, visite www.usa.canon.com/support (Para el cliente de Estados unidos) www.canon.ca/support (Para el cliete de Canad) Cumplimiento para Canad Declaracin sobre la exposicin a la radiacin de radiofrecuencia
"Este dispositivo cumple con las especificaciones para regulaciones de radios (Radio Standards Specification, RSS) de exencin de licencia de la industria de Canad. La utilizacin de este equipo est sujeta a las dos condiciones siguientes:
(1) Este dispositivo no causa interferencia perjudicial y
(2) Este dispositivo debe aceptar cualquier interferencia, incluso toda interferencia que pueda causar un funcionamiento no deseado". PMN: Cmara fotogrfica digital de imagen fija ESPECIFICACIONES Fuente de energa: Batera interna recargable de polmero de litio 660 mAh 3.8 V Conectividad: Bluetooth 4.2 Temperatura de funcionamiento: 14 a 104F (10 a 40 C) Temperatura recomendada de operacin y carga 59 a 90F (15 a 32C) Dimensiones: 4.4" (An.) x 1.8" (Al.) x 0.7" (Pr.) /
Peso: 3 oz (90 g) Apagado automtico : 3 minutos / 5 minutos / 10 minutos NOTA: Todas las especificaciones estn sujetas a cambio sin previo aviso. 110.5mm (An.) x 45.2 mm (Al.) x 18.5 mm (Pr.)
(seleccionable en la aplicacin) poder no imprimir. Deixe a temperatura da impressora se ajustar temperatura de operao recomendada de 15 a 32C, antes de tentar imprimir novamente. No use ou deixe o produto sob luz solar direta. Evite tambm reas sujeitas rpidas mudanas de temperatura, umidade alta, poeira e sujeira. Ao operar em condies meteorolgicas extremas, a impressora Ao carregar a impressora faa-o em um ambiente com a temperatura Use um pano suave e seco para limpar o produto. No o limpe com um Mantenha a tampa superior fechada para evitar a entrada de poeira ou pano mido ou com lquidos volteis tais como tner de pintura. outras partculas ao interior da impressora. recomendada de 15 a 32C. PMN: Cmera de Vdeo Digital com Imagem Fixa ESPECIFICAES Fonte de energia: Bateria interna recarregvel Polmero de ltio de 3,8 V 660 mAh Conectividade: Bluetooth 4.2 Temperatura de operao (imprimindo): 14 a 104F (10 a 40 C) Temperatura de operao, carregamento e armazenamento recomendada:
Temperatura: 59 a 90F (15 a 32C) Dimenses: 110,5 mm (C) x 45,2 mm (A) x 18,5 mm (P) Peso: 90 g Desligamento automtico: 3 minutos / 5 minutos /10 minutos NOTA: Todas as especificaes do produto esto sujeitas a alteraes
(selecionvel pelo In-App) sem aviso. PORTUGUESE NOTA License Notice THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMA-
TION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM Manufacturer: CANON ELECTRONIC BUSINESS MACHINES
(H.K.) CO., LTD. 17/F, Tower One, Ever Gain Plaza, 82-100 Container Port Road, Kwai Chung, New Territories, Hong Kong Importer : CANON U.S.A., INC. One Canon Park, Melville, NY 11747, 1-800-OK-CANON CANON CANADA INC. 8000 Mississauga Road, Brampton, ON, L6Y 5Z7, Canada CANON MEXICANA, S. de R.L. de C.V. Blvd. Manuel vila Camacho No.138 Piso 17 Col. Lomas de Chapultepec, Del. Miguel Hidalgo, C.P. 11000, Mxico, Ciudad de Mxico Tel: (5255) 52494905 Made in China / Fabriqu en Chine /
Hecho en China / Fabricado no China Printed in China / Imprim en Chine /
Impresso en China / Impresso no China E-PO-1272 CANON ELECTRONIC BUSINESS MACHINES (H.K.) CO., LTD. 2019 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC REGULATIONS Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may be a registered trademark, or trademark, in other countries. IVY is a trademark of Canon U.S.A., Inc. in the United States. Apple, the Apple logo, iPad, iPad Air, iPad Pro, and iPhone are trademarks of Apple Inc., registered in the United States and other countries. App Store is a service mark of Apple Inc. iOS is a trademark or registered trademark of Cisco in the United States and other countries and is used under license. Android, Google Play and the Google Play logo are trademarks of Google LLC. Bluetooth is a registered trademark of Bluetooth SIG. Wi-Fi is a registered trademark of the Wi-Fi Alliance. All other third-party product names, brand names and logos are trademarks of their respective owners.