LED MONITOR SET UserManual Copyright2021Cargo Systems Inc. Cargo Systems Inc. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. RF warning:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. 2 Cargo Systems Inc. 1. ProductSpecification Dimension:
986mm(W)x390mm(H)x98mm(T) ColorChoice:
Silver,golden Pixel:
Weight:
RefreshingRate:
384x128x2@P2.5 13.5kg 3,840Hz InputVoltage&Current:
9~36V34A~8A MaxPower:
Brightness:
IPRating:
300W 4,500nits/m2 IP56 WorkingTemperature:
40~75 FrequencyBands(MHz):
WCDMABand2/Band5 FDD_LTEBand2/Band4/Band12 Memory:
Flashmemory:
2GB 16GB OperatingSystem:
Android 3 2. InstallationGuide Connectiondiagramofthedisplay Cargo Systems Inc. Step1.Connectthepositive,negativeandACCwiresfromyourcarbatterytothedisplay Step2.Installthedisplayonyourrooftopcrossbar 4 Cargo Systems Inc. 3. HowtoUsetheDisplay 3.1 Createyourownaccount:
Step1.VisitourAIPSplatformathttps://www.ledaips.com Registeran accountbyclickingJoininbelow pictureoryoumayuseourtestaccountbelowforabrief visit. AdminAccount:dreamTaxiTest AdminPassword:dreamTaxiTest Step 2. After logging in, you will see the functions shown in below picture of which we will walk you throughsomemajorfunctionssoastogetyourselfacquaintedwiththesystem. 5 Cargo Systems Inc. 3.2 Playmediaonyourdisplay Step1.Uploadyourmediafilesbyfollowingthemenupath:Media>Uploadmediafile(s) Waittillthefile(s)finishes Step2.Createaprogrambyfollowingthemenupath:Programs>Addsimpleprogram Inthepopupwindow,setdisplaypixelsizesat384forWidthand128forHeight. 6 Cargo Systems Inc. Step3.Choosetheimagesandclick+toaddthemtotheprogram. Ontherightofthewindow,setanamefortheprogramandclickSave. Step4.Createprogramtaskbyfollowingthemenu:
Programs>Example(Theprogramwejustadded)>CreateTaskquickly 7 Cargo Systems Inc. 8 Step5.SendProgrambyfollowingthemenu:
TerminalControl>Choosetheterminal>ProgramsTask>ClickSendtheProgramtask Cargo Systems Inc. 9 3.3 SendtaskbasedonGPS Step1.Choosethemap. Cargo Systems Inc. Step2.AddGPSplaypointbyclickingthelocationonthemap. SetNameofGPSTaskName.Choosethemedia,inputNameandradius. Step3.SavetheGPStask. 10 Step4.SendGPStaskbyfollowingthemenu:
TerminalControl>Choosetheterminal>GPSTask>ClickSendtheProgramtask Cargo Systems Inc. 11