-Operational steps for Learnit Tablet. Make sure that LEARNIT is fully charged before using.
(Green light indicates full charge, unplug not to overcharge and reduce battery life) Try not to use LEARNIT while charging to avoid damage to charging pin or charging port. Turn on device from the switch located on top right side where unit is plugged in to charge. After turning on the device allow a few minutes for the device to download preloaded applications.(If not all applications may not appear on screen) Touch and slide lock on opening screen to the right to view home screen Touch the circled dots on right hand side of home screen to see applications. Scroll from right to left to see more applications. Touch the arrow on left bottom screen to go back to front screen. TO ACCES KIDS PLACE -CARIBBEAN eBOOK Unlike other tablets, the LEARNIT does not require an Internet connection, so applications are always available and ready for students to use!
Touch Kids Place on home screen to go to kids place Caribbean eBook screen (this locks the device from internet use). Touch anyone of the Category listings to get to Kids Place Caribbean eBook home page Touch the three dots to the far right and select Show category list, and then choose application. Touch Category of interest. Touch application you wish to use Listen for instructions (wait until voice giving instructions stop) Follow instructions completely to get maximum results from all applications Scroll from left to right to see full version applications that are available in Kids Place SIMPLY: TOUCH LISTEN- DO- LEARN To exit kids place type in password 7603 Connect Learnit to the internet To connect device to the internet click settings Turn on Wi-Fi on the other side of the same screen find the internet connection available and click on it Type in pass word and click connect. When connected scroll down from Wi-Fi to + Add account Add account box will appear. Click on Google and another box will appear click existing and type in Gmail account and password. Follow steps until full set up is completed Browse the internet. MID MID check with retailer for all customer support needs FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC RF warning statement: the device has been evaluated to meet general RF exposure requirement , The device can be used in portable exposure condition without restriction.