FCC ID: 2ANDV-VS100VS500 Intel Wireless-AC 9260

by: Carl Zeiss Vision GmbH latest update: 2022-10-12 model: VS100VS500

Seven grants have been issued under this FCC ID from 07/07/2022 to 10/12/2022 (this is one of seven releases in 2022 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked instructions, troubleshooting guides, warrantee terms, password defaults, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 5 6 7 User manual Users Manual pdf 2.64 MiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 User manual ANT list 20220926 Users Manual pdf 554.08 KiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 9260NGW- IntPho Internal Photos pdf 285.62 KiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 9260NGW- ExtPho External Photos pdf 349.03 KiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 Expho 20220706 External Photos pdf 472.95 KiB July 06 2022 / July 07 2022
1 2 3 4 5 6 7 9260NGW- LabelLoc ID Label/Location Info pdf 48.10 KiB July 06 2022 / July 07 2022
1 2 3 4 5 6 7 9260NGW- Labelsmpl ID Label/Location Info pdf 28.43 KiB July 06 2022 / July 07 2022
1 2 3 4 5 6 7 Cover Letter(s) pdf October 11 2022 / October 12 2022
1 2 3 4 5 6 7 Cover Letter(s) pdf October 11 2022 / October 12 2022
1 2 3 4 5 6 7 RF Exposure Info pdf October 11 2022 / October 12 2022
1 2 3 4 5 6 7 9260NGW- TestRpt FCC 15.407-WLAN-part1 Test Report pdf 2.71 MiB October 11 2022 / October 12 2022
1 2 3 4 5 6 7 9260NGW- TestRpt FCC 15.407-WLAN-part2 Test Report pdf 4.88 MiB October 11 2022 / October 12 2022
1 2 3 4 5 6 7 9260NGW- Tsup Test Setup Photos pdf 167.04 KiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 Test Report pdf October 11 2022 / October 12 2022
1 2 3 4 5 6 7 Block Diagram Block Diagram pdf October 11 2022 confidential
1 2 3 4 5 6 7 Cover Letter(s) pdf October 11 2022 / October 12 2022
1 2 3 4 5 6 7 TSUP room in 20220926 Test Setup Photos pdf 2.25 MiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 9260NGW- TestRpt FCC 15.247-BLE Test Report pdf 367.35 KiB October 11 2022 / October 12 2022
1 2 3 4 5 6 7 9260NGW- TestRpt FCC 15.247-WLAN Test Report pdf 3.72 MiB October 11 2022 / October 12 2022
1 2 3 4 5 6 7 9260NGW- TestRpt FCC 15.247-BT 20220926 Test Report pdf 489.05 KiB October 11 2022 / October 12 2022
1 2 3 4 5 6 7 ATTESTATION - signed Cover Letter(s) pdf 156.09 KiB July 06 2022 / July 07 2022
1 2 3 4 5 6 7 Declaration letter for electrically identical - signed Cover Letter(s) pdf 326.01 KiB July 06 2022 / July 07 2022
1 2 3 4 5 6 7 FCC Auth Ltr Change of ID 9260NGW Carl Zeiss Vision Cover Letter(s) pdf 88.43 KiB July 06 2022 / July 07 2022
1 2 3 4 5 6 7 User manual Users Manual pdf 2.64 MiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 User manual ANT list 20220926 Users Manual pdf 554.08 KiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 9260NGW- IntPho Internal Photos pdf 285.62 KiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 9260NGW- ExtPho External Photos pdf 349.03 KiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 Expho 20220706 External Photos pdf 472.95 KiB July 06 2022 / July 07 2022
1 2 3 4 5 6 7 9260NGW- LabelLoc ID Label/Location Info pdf 48.10 KiB July 06 2022 / July 07 2022
1 2 3 4 5 6 7 9260NGW- Labelsmpl ID Label/Location Info pdf 28.43 KiB July 06 2022 / July 07 2022
1 2 3 4 5 6 7 Cover Letter(s) pdf October 11 2022 / October 12 2022
1 2 3 4 5 6 7 Cover Letter(s) pdf October 11 2022 / October 12 2022
1 2 3 4 5 6 7 RF Exposure Info pdf October 11 2022 / October 12 2022
1 2 3 4 5 6 7 9260NGW- TestRpt FCC 15.407-WLAN-part1 Test Report pdf 2.71 MiB October 11 2022 / October 12 2022
1 2 3 4 5 6 7 9260NGW- TestRpt FCC 15.407-WLAN-part2 Test Report pdf 4.88 MiB October 11 2022 / October 12 2022
1 2 3 4 5 6 7 9260NGW- Tsup Test Setup Photos pdf 167.04 KiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 Test Report pdf October 11 2022 / October 12 2022
1 2 3 4 5 6 7 Cover Letter(s) pdf October 11 2022 / October 12 2022
1 2 3 4 5 6 7 TSUP room in 20220926 Test Setup Photos pdf 2.25 MiB October 11 2022 / April 11 2023 delayed release
1 2 3 4 5 6 7 9260NGW- TestRpt FCC 15.247-BLE Test Report pdf 367.35 KiB October 11 2022 / October 12 2022
1 2 3 4 5 6 7 9260NGW- TestRpt FCC 15.247-WLAN Test Report pdf 3.72 MiB October 11 2022 / October 12 2022
1 2 3 4 5 6 7 9260NGW- TestRpt FCC 15.247-BT 20220926 Test Report pdf 489.05 KiB October 11 2022 / October 12 2022
1 2 3 4 5 6 7 ATTESTATION - signed Cover Letter(s) pdf 156.09 KiB July 06 2022 / July 07 2022
1 2 3 4 5 6 7 Declaration letter for electrically identical - signed Cover Letter(s) pdf 326.01 KiB July 06 2022 / July 07 2022
1 2 3 4 5 6 7 FCC Auth Ltr Change of ID 9260NGW Carl Zeiss Vision Cover Letter(s) pdf 88.43 KiB July 06 2022 / July 07 2022

frequency equipment class purpose
1 2022-10-12 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2422 ~ 2462 DTS - Digital Transmission System
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2022-07-07 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in Identification
5 JBP - Part 15 Class B Computing Device Peripheral
6 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
7 2422 ~ 2462 DTS - Digital Transmission System

Application Forms

app s Applicant Information
1 2 3 4 5 6 7 Effective 2022-10-12
1 2 3 4 5 6 7 2022-07-07
1 2 3 4 5 6 7 Applicant's complete, legal business name Carl Zeiss Vision GmbH
1 2 3 4 5 6 7 FCC Registration Number (FRN) 0026762641
1 2 3 4 5 6 7 Physical Address Turnstrasse 27
1 2 3 4 5 6 7 Aalen, N/A
1 2 3 4 5 6 7 Germany
app s TCB Information
1 2 3 4 5 6 7 TCB Application Email Address h******@acbcert.com
1 2 3 4 5 6 7 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4 5 6 7 A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
1 2 3 4 5 6 7 Grantee Code 2ANDV
1 2 3 4 5 6 7 Equipment Product Code VS100VS500
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 Name J****** F******
1 2 3 4 5 6 7 M**** G********
1 2 3 4 5 6 7 Title Head of VTS R&D
1 2 3 4 5 6 7 Telephone Number 00497********
1 2 3 4 5 6 7 00497********
1 2 3 4 5 6 7 Fax Number 00497********
1 2 3 4 5 6 7 E-mail j******@zeiss.com
1 2 3 4 5 6 7 m******@zeiss.com
app s Technical Contact
1 2 3 4 5 6 7 Firm Name DEKRA
1 2 3 4 5 6 7 DEKRA Testing and Certification Co., Ltd
1 2 3 4 5 6 7 Name C****** P****
1 2 3 4 5 6 7 c******** p********
1 2 3 4 5 6 7 Physical Address No.5-22, Ruishukeng, Linkou Dist.
1 2 3 4 5 6 7 New Taipei City, 24451
1 2 3 4 5 6 7 Taiwan
1 2 3 4 5 6 7 Telephone Number +8862********
1 2 3 4 5 6 7 E-mail c******@dekra.com
1 2 3 4 5 6 7 c******@dekra.com
1 2 3 4 5 6 7 c******@dekra.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 6 7 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 No
1 2 3 4 5 6 7 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 No
1 2 3 4 5 6 7 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)04/11/2023
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 7 Equipment ClassNII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 7 DTS - Digital Transmission System
1 2 3 4 5 6 7 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4 5 6 7 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wireless-AC 9260
1 2 3 4 5 6 7 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 7 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 7 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 6 7 Change in Identification
1 2 3 4 5 6 7 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 7 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 7 Grant CommentsPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. C2PC Application, to cover 2 additional different antennas (type - dipole antennas with Part number 89454, manufactured by DELOCK). RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this c2pc filing with the new dipole antennas complies with KDB 447498 and is approved for mobile/fixed operation. Installers and end-users must be provided with transmitter installation (along with the new dipole antennas) and operation conditions for satisfying RF exposure compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. C2PC Application, to cover 2 additional different antennas (type - dipole antennas with Part number 89454, manufactured by DELOCK). RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this c2pc filing with the new dipole antennas complies with KDB 447498 and is approved for mobile/fixed operation. Installers and end-users must be provided with transmitter installation (along with the new dipole antennas) and operation conditions for satisfying RF exposure compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. C2PC Application, to cover 2 additional different antennas (type - dipole antennas with Part number 89454, manufactured by DELOCK). RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this c2pc filing with the new dipole antennas complies with KDB 447498 and is approved for mobile/fixed operation. Installers and end-users must be provided with transmitter installation (along with the new dipole antennas) and operation conditions for satisfying RF exposure compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 7 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 7 Firm Name DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
1 2 3 4 5 6 7 Intel Corporation - Oregon CPRS Labs
1 2 3 4 5 6 7 Name M****** L******
1 2 3 4 5 6 7 F**** B********
1 2 3 4 5 6 7 Telephone Number +886-******** Extension:
1 2 3 4 5 6 7 50361********
1 2 3 4 5 6 7 Fax Number +886-********
1 2 3 4 5 6 7 50369********
1 2 3 4 5 6 7 E-mail m******@dekra.com
1 2 3 4 5 6 7 f******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.191
1 2 15E CC MO 5190 5230 0.134
1 3 15E CC MO 5210 5210 0.062
1 4 15E CC MO ND 5260 5320 0.229
1 5 15E CC MO ND 5270 5310 0.11
1 6 15E CC MO ND 5290 5290 0.052
1 7 15E CC MO ND 5500 5700 0.198
1 8 15E CC MO ND 5510 5670 0.221
1 9 15E CC MO ND 5530 5690 0.232
1 1 15E CC MO 5745 5825 0.229
1 11 15E CC MO 5755 5795 0.198
1 12 15E CC MO 5775 5775 0.148
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.01
2 2 15C CC MO 2412 2472 0.984
2 3 15C CC MO 2422 2462 0.43
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5180 5240 0.191
6 2 15E CC MO 5190 5230 0.134
6 3 15E CC MO 5210 5210 0.062
6 4 15E CC MO ND 5260 5320 0.229
6 5 15E CC MO ND 5270 5310 0.11
6 6 15E CC MO ND 5290 5290 0.052
6 7 15E CC MO ND 5500 5700 0.198
6 8 15E CC MO ND 5510 5670 0.221
6 9 15E CC MO ND 5530 5690 0.232
6 1 15E CC MO 5745 5825 0.299
6 11 15E CC MO 5755 5795 0.198
6 12 15E CC MO 5775 5775 0.148
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.01
7 2 15C CC MO 2412 2472 0.984
7 3 15C CC MO 2422 2462 0.43

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC