FCC ID: SNJCPO Widup Car-Park outdoor sensor model no. SBPSMWBAT

SBPSMWBAT 4x M3*16 T10

-50C to +30C

(-58F to 86F)

-40C to +75C

(-40F to 167F) SBPSMWBAT + SBPWSHA

>110

>45

> 110

> 45 60-90%

80-95%

60-90%

0-10%

70-90%

SBPSMWBAT + SBPWSHB 89.4mm (3.51 ") 30.5mm (1.37") MANUAL SBPSMWBAT code 15-029-671 / 010319 150cm (59")250 cm (98.4")150 cm (59")250 cm (98.4")IP20IP67 SBPSMWBAT Instruction Manual WiDUP 2.4GHz Attach here the label Appliquer ltiquette ici Pegue la etiqueta aqu Applicare qui letichetta Befestigen Sie hier das Label Vedhft etiketten her Fst hr etiketten Fest her etiketten Bevestig hier het label SIN 255.255.255/999.999 Write here the location Ecrivez ici lemplacement Escriba aqu la ubicacin Scrivi qui la posizione Schreiben Sie hier die Position Skriv placeringen her Skriv hr fr den plats Skriv her er plasseringen Schrijf hier de locatie SBPSMWBAT 1 Compliant with:

FCC Rule part 15C;

IC RSS-247 Issue 2, RSS-GEN Issue 5, RSS-102 Issue 5;

RED Directive ISED Canada Statement:

This device complies with ISEDs license-exempt RSSs. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device should be located at a distance of at least 20 cm from all persons during normal operation. The antennas used for this product must not be co-located or operated in conjunction with any other antenna or transmitter. Le dispositif doit tre plac une distance dau moins 20 cm partir de toutes les personnes au cours de son fonctionnement normal. Les antennes utilises pour ce produit ne doivent pas tre situs ou exploits conjointement avec une autre antenne ou transmetteur. FCC Statement:

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Increase the separation between the equipment and receiver

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

-Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement for FCC:

This device complies with FCC radiation exposure limits for an uncontrolled environment. This device shall be installed and operated with a minimum distance of 20 cm between users or bystanders and the device. MANUAL SBPSMWBAT code 15-029-671 / 010319 http://www.carlogavazzi.com/

CARLO GAVAZZI REPEATER

SBPSMWBAT Dupline Carpark 3 wireless magnetic sensor Benefits Small compact magnetic sensor for both the flush-

mounted base SBPWSHA and the surface-mounted base SBPWSHB Wireless communication by use of wiDup (2,4Ghz, IEEE 802.15.4, Proprietary application layer) Powered by an internal battery with a lifetime of up to 8 years Easy to install and no maintenance is needed Wide temperature range: -40 to +75C Approved by (RED/FCC wireless certifications) Description The Carpark 3 wireless magnetic sensor can detect the presence of a car when the car is parked above the sensor. By using the Earth's magnetic field, the sensor can detect if a car is parked above it and send the information wirelessly to a nearby repeater. Applications Parking Guidance Systems Main functions The wireless sensor SBPSMWBAT detects presence of a car in the parking space 14/12/2018 SBPSMWBAT ENG Features Power Supply Rated operational voltage Battery lifetime Standard compliance SBPSMWBAT 3.6 VDC powered by internal Primary Lithium-thionyl chloride battery cell em-

bedded in the product Up to 8 years IEC60950/UL60950 (information technologies) A B A Battery with SIN number written on top of it B Red LED blinking in sequences depending on the status Fig. 1 Battery and LED Consumption The device works in cycles. Every cycle has a period of 4 seconds. In every cycle, the device can exclusively sample or transmit, or transmit and listen. These operations have a limited duration, and the rest of the cycle is spent in sleep mode. Environmental Operating temperature Storage temperature Humidity For indoor and outdoor usage LED indication

-40 to 75C

(max 30C is advised) 0-100% Relative humidity The LED is visible only when the lid is removed 14/12/2018 SBPSMWBAT ENG Carlo Gavazzi Controls S.p.A 2 SBPSMWBAT OFF ON Short blinking Long blinking Power OFF During configuration Sending data to a wireless base Module not configured Red LED Mechanics Housing Casing Colour Dimensions (HxWxD) Weight Tightening torque Compatibility and conformity RTP 0199 x 134531 A Polypropylene, glass fibre reinforced Grey, RAL7043 89.0 x 89.0 x 30.7 mm 230 g 0.5 Nm EMC Immunity Emission Approvals Standards Approvals Electrostatic discharges EN 61000-4-2 Radiated radio frequency EN 61000-4-3 Power frequency magnetic fields EN 61000-4-8 Radiated emissions CISPR 22 (EN55022), cl. B IEEE 802.15.4 FCC ID: SNJCPO HVIN: 1 IC: 7118D-CPO I.T.E. E345706 POLL. 2 14/12/2018 Carlo Gavazzi Controls S.p.A 3 SBPSMWBAT Mode of operation Mode of operation The SBPSMWBAT wireless sensor in combination with either the flush-mounted base SBPWSHA or the surface-mounted base SBPSHB can be used in areas where cables are difficult or expensive to install as well as in areas where traditional ceiling-mounted ultrasonic sensors are not an option. In combination with the flush-mounted base SBPWSHA, the module is mounted to align with the surface and uses the Earths magnetic field to determine if a car is present or not. The module can also be mounted with the surface-mounted base SBPWSHB. This installation is more accessible as the base just needs to be glued to the surface of the parking space. See fig. 2 and 3 Fig. 2 SBPWSHA with SBPSMWBAT Fig. 3 SBPWSHB with SBPSMWBAT The sensor communicates wirelessly with a base module which must be placed in a cabinet within a maximum of 50 metres in the open air. The base module can operate with up to 150 wireless sensors; they just need to be within range to achieve reliable communication. See fig. 4 14/12/2018 Carlo Gavazzi Controls S.p.A 4 SBPSMWBAT D 100 m 0 m 0 1 B E 5 0 m A B C 100 m 5 0 m A B C Wireless base Wireless repeater Wireless sensors Fig. 4 Overview D E Up to 100 m transmission in the open air be-

tween wireless repeaters and wireless base unit Up to 50 m transmission in the open air be-

tween wireless repeaters and sensors The sensor and base must be mounted at least 260 cm away from the nearby base and sensor to avoid activation error caused by tightly parked vehicles. The wireless sensor is ready for use, and no special handling is required. Fig. 5 x= Sensor position 14/12/2018 Carlo Gavazzi Controls S.p.A 5 SBPSMWBAT Each sensor has a unique SIN number. When the configuration is finished, the sensors SIN number is visible in the Carpark 3 configuration software. The sensor has a built-in red LED. This LED is mounted on the rear side of the sensor, so it is not visible when the sensor is installed in the base. The LED indicates the status of the sensor and can be used before and during installation. The different LED status indications are described in the section "LED". The installer must use the SBP configuration tool to discover and assign a position to the wireless sensors. The sensors must be entered in consecutive order; otherwise, you will not know their position in the parking lot Calibration is essential and can only be performed when the parking space is empty. When the sensor is assigned a position and calibrated, it is fully operational. When the two parts are to be assembled, it is vital that they are dry and clean. Even though the sensor is moulded and protected, there is a high risk of water penetration if this precaution is not observed. The tightening torque as described in the section "Housing" must be respected. References Accessories Item Anti-vandal torq bit T10 4 M3*16 T10 screws Product selection key Item number 44849 44823 SBPSMWBAT Code SB P S M W BAT Option

-

-

-

-

-

-

Description Smart Building Parking Sensor Magnetic Wireless Battery COPYRIGHT 2018 Content subject to change. Download the PDF: www.productselection.net 14/12/2018 Carlo Gavazzi Controls S.p.A 6