Wireless Entrapment Protection Device For Industrial Doors ESPE Type WSM / WSS Wireless Entrapment Protection Device for Industrial Doors Replaces cable between Door controller and ESPE Input for two ESPE (electro-sensitive protective equipment) Input for door-in-door sensor Output ESPE 1 x SPST NC, 1 x SPDT NO (8,2koHm) Output low battery 1 x SPST NC contact 2,4 GHz duplex communication Built-in antenna Approval according to ????
IP66 ratings IC WSM 2 B A 2 D24 Ordering Key Function Main/Sub Module No of channels Mute function Adjustment Output Power supply for system Product Description Wireless Entrapment Protec-
Industrial tion Device Doors. The is designed to replace the con-
nection cable between the ESPE (electro-sensitive pro-
tective equipment) and the door controller. The sub mod-
ule has input for either, N.C. ESPE, N.O. 8.2 koHm ESPE or our own low consumption photoelectric ESPE N.C. con-
tact. The system is designed for high reliability using 2.4 GHz duplex communica-
tion between the main and sub module. The main mod-
ule can handle up to 4 sub modules i.e. one system can handle 8 ESPEs. The sub module is put to live by a test signal from the main module and sat awake for the time set at then sub module up to 80 seconds. Type Selection Housing Range W x H x D Wireless Type Ordering no. 75 x 125 x 35 mm 10 m 45 x 214 x 22 mm 10 m Main Module WSM 2 B A 2 D24 Sub Module WSS 2 B A 2 BAT Housing Range W x H x D Sn Type Ordering no. 11 x 24.5 mm 15 m 11 x 24.5 mm 15 m Emitter PB 11 CNT 15 WE Receiver PB 11 CNT 15 WR Specifications Main module
(-10 +15%) Rated operational volt. (UB ) 12 to 24 VAC/DC Ripple (Urpp ) 10%
Supply current < 50 mA Communication Frequency 2.4 GHz Duplex Number of channels 16 selectable on DIP switch Sub module live time 10 80 Sec. Selectable on DIP-switches Relay ESPE NC SPST ESPE NO 8.2 koHm SPST Low Battery SPST DC11 ???
AC11 ???
Operations Minimum: 600000 @ 0.5 A, Operations Minimum: 100000 @ 0.5 A, 50 VAC/30 VDC 125 VAC/ 1A, 30 VDC Response time OFF-ON (tON) 50 mS ON-OFF (tOFF) 50 mS Power ON delay (tV) Main module < 300 mS Protection Reverse polarity, transients Indications Main Module Power supply Green LED ESPE 1 or 2 active 2 x yellow LEDs Low Battery Red LED Channels not synchronized Toggle red & green Test input
(active high or active low) Selectable in DIP switch Active high Description Active low Description Specifications are subject to change without notice (21.12.2010) 1 WSM/WSS ... Specifications Main module (cont.) Test impulse time Minimum pulse width > 50 mS Maximum pulse width < 2 sec Operating frequency 500 Hz Response time OFF-ON (tON) 1.0 ms ON-OFF (tOFF ) 1.0 ms Environmental Installation category III Pollution degree 3 Degree of protection IP66 Rated insulation voltage 50 VDC Temperature Operating Temperature -25 to +60C (-13 to +140F) Storage Temperature -40 to +70C (-40 to +158F) Size 75 x 35 x 125 mm Material Housing Light Grey ABS Top Light Grey ABS Weight 230 g FCC port 15(C) 15.247 FCC ID: Y55WMM0001 IC RSS210 Approvals UL508 CE-marking EN12445, EN12453, EN12978 Radio Equipment and Telecommunications Terminal Equipment
(R&TTE) Directive 1999/5/EC Low Voltage Directive 73/23/EEC Electromagnetic Compatibility Directive 8973367EEC Machinery Directive 98/37/EC, amended by Directive 98/79/EC For industrial doors only See EN13241-1 NOTE: Changes/modifications not approved by the responsible party could void the users authority to operate the equipment. Specifications Sub module AA batteries 2 battery supplied with the sub-module Rated operational volt. (UB ) 1to 4 Lithium 3.6VDC size Supply current < ?? mA Communication Frequency 2.4 GHz Duplex Number of channels 16 selectable on DIP switch Sub module live time 10 80 Sec. Selectable on DIP-switches in the main module ESPE inputs ESPE NC Standard NC ESPE ESPE NO 8.2 koHm Standard NO, 8.2 koHm Photoelectric ESPE Carlo Gavazzi Low current Door in door input NC input from Limit switch ESPE PES for wireless applications Response time OFF-ON (tON) 50 mS ON-OFF (tOFF) 50 mS Power ON delay (tV) Sub module after sleep <100 mS Protection Reverse polarity Indications Sub Module ESPE 1 Yellow LED ESPE 2 Yellow LED Test input The submodule wake up after the test input of the main module lights in 20 sec. after a short activation on the pushbutton Antenna Built in Environmental Installation category III Pollution degree 3 Degree of protection IP66 Rated insulation voltage 50 VDC Temperature Operating Temperature -25 to +55C (-13 to +131F) Storage Temperature -40 to +70C (-40 to +158F) Size 22 x 45 x 214 mm Material Housing Light Grey PC Top Black PC Weight 220 g Approvals UL508 FCC port 15(C) 15.247 FCC ID: Y55WSM0001 IC RSS210 CE-marking EN12445, EN12453, EN12978 Radio Equipment and Telecommunications Terminal Equipment
(R&TTE) Directive 1999/5/EC Low Voltage Directive 73/23/EEC Electromagnetic Compatibility Directive 8973367EEC Machinery Directive 98/37/EC, amended by Directive 98/79/EC For industrial doors only See EN13241-1 NOTE: Changes/modifications not approved by the responsible party could void the users authority to operate the equipment. 2 Specifications are subject to change without notice (21.12.2010) WSM/WSS ... Specifications Photoelectric Sensors ESPE Rated operational volt. (UB ) From Sub module Rated operational dist. (UB ) 15 m Light source LED 880 nm Light Type Infrared Modulated Degree of protection IP67 Housing size 11 x 24.5 mm Housing Material PA6 Glass reinforced UL-Approvals UL508 Ambient light >20.000 lux CE-marking EN12978 Operation Diagram Main Module Power supply Output NO (8,2kohm) 0 oHm 8,2 Kohm Output NC Test input Active High Test input Active Low Sub Module Safety edge active Power supply NO Contact Closed NO Contact Open e.g. High voltage e.g. Low voltage e.g. High voltage e.g. Low voltage Interruption No interruption Awake mode Sleep mode t2 t2 t1 t1 t1 = 50 mS t2 = 500 mS t3 range from 10 to 80 S (t3 is always starts/restart after t2) Normal test Test while safety edge active Test while safety edge inactiveactive Wiring Diagrams t2 t2 t1 t1 t2 t2 t1 t1 t2 t2 t1 t1 t3 t3 t3 t3 WSM2BA2D24 WSS2BA2BAT WIRELESS MAIN MODULE WIRELESS SUB MODULE RX1: PHOTELECTRIC RECEIVER 1 RX2: PHOTELECTRIC RECEIVER 2 TX1: PHOTELECTRIC EMITTER 1 TX2: PHOTELECTRIC EMITTER 2 RX1 -
RX1 +
RX2 -
RX2 +
TX1 - (EPD1) TX2 - (EPD2) TX1 + (EPD1) TX2 + (EPD2) LIMIT SWITCH -
LIMIT SWITCH +
Relay OUTPUT 24 VAC/VDC 1A INPUT Test input high/low 12-24VAC/VDC Supply Class 2 12-24VAC/VDC NC COM NC 8K2 COM 8K2 LOW BAT COM LOW BAT NC SIGNAL/RD (TX+) SIGNAL/BU (RX+) GROUND/BK (TX-) GROUND/BK (RX-) Photoelectric Transmitter Photoelectric Receiver Specifications are subject to change without notice (21.12.2010) 3 WSM/WSS ... Detection Diagram Beam propagation 0,8 0,6 0,4 0,2
m
0 0
-0,2
-0,4
-0,6
-0,8 Excess Gain 1000,0 100,0 10,0 i n a g s s e c x E 1,0 1 2 4 6 8 10 12 14 Sensing range [M]
10 Distance (m) 100 4 Specifications are subject to change without notice (21.12.2010) WSM/WSS ... Dimensions Wireless Sub Module m m 6 2 242.17 mm m m 7 1 5 4
, Wireless Main Module Emitter / Reciever 24.5 15.1 2.9 75 mm m m 5 3 m m 5 2 1 Specifications are subject to change without notice (21.12.2010) 5