Applicant: Carrin Electronics Co., Ltd. FCC ID: Q9E-91527 91186 WWVB (CAR021 +CAR014) Features:
l Weather Forecast with Sunny, Slightly Cloudy, Cloudy, Rainy and Cloud Burst. l Radio controlled time with manual setting option l 433MHz RF receiving frequency. l Maximum three selectable RF channels with wireless Thermo Sensor.
(One Wireless Thermo Sensor Included) l Transmission range: 100 ft. ( open area ). l Measuring range:
Indoor temperature : 32 F ~ 122F (0C ~ 50C) Outdoor temperature : -58 F ~ 158F (-50C ~ +70C) Indoor Humidity : 20% ~ 90%
l With 10 feet Corded Outdoor Temperature Probe. l Outdoor Temperature Alert function. l Max/Min Memory for Outdoor Temperature. l Low-battery indicator for Outdoor Remote Sensor. l Perpetual Calendar Up to Year 2069. l 12/24Hour time display selectable. l Wall mount or Table Stand Selectable. l Battery:
Main Unit : DC 1.5 V AA size x 2 pcs Thermo & Hygro Sensor Unit : DC 1.5 V AAA size x 2 pcs l Size:
Main Unit : 166 x 95 x 25 mm Thermo & Hygro Sensor Unit : 98 x 77 x 20 mmMain Unit Appearance Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The users manual or instruction manual for an unintentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Part A- LCD A1: Weather Forecast A2: Barometric Pressure Trend A3:. Outdoor Temperature A4: Outdoor Humidity A5: Outdoor Temperature Trend A6: Indoor Humidity A7: Indoor Temperature A8: Moon Phase Display A9: Calendar A10: Radio Controlled Time Part B- Buttons B1: SNOOZE/LIGHT button B2: MAX/MIN button. B3: ALARM ON/OFF button B4: MODE button B5: WEATHER button B6: IN B7: ALERT button B8: + 12/24 button B9: - OUT C/F button B10: CHANNEL button B11: RESET button Part C- Structure C1: Wall Mount Hole C2: Battery Compartment C3:. Stand C/F button Thermo & Hygro Sensor Unit Appearance. D1: Outdoor Temperature D2: Outdoor Humidity D3: Transmission Indication LED D4: Temperature Probe & Plug D5: C/F button D6: Channel Selecting Switch D7: TX button D8: Battery Compartment. D9: Wall Mount Hole Set Up:
Insert batteries.
Use a pin to press the RESET (B11) button Radio Controlled Clock:
l The clock automatically starts scanning the RF 433MHz signal to register new Thermo Sensor Unit after new batteries inserted. After registered new channels or press CHANNEL button (B10) to stop scanning, the clock will then scan the WWVB time signal (
flashes on the LCD ). Buttons will not function while scanning for WWVB time signal or Thermo sensors signal unless they are well received or stopped manually. l The clock automatically scans the time signal at 2.00 a.m. everyday to maintain accurate timing. For failed reception, scanning stops (
on the LCD disappear ) and repeats again at 3.00 a.m. 4.00a.m. and 5.00a.m. l The clock manually scans the time signal by holding - button (B9) for 3 seconds. For failed reception, scanning stops. (
on the LCD disappear ). l Hold - button (B9) for 3 seconds to stop scanning when receiving WWVB time signal. flashes indicate now is receiving WWVB time signal turns on indicate signal received successfully Manual Time Setting:
l Hold MODE button (B4) for 3 seconds to enter Clock/Calendar setting Mode when viewing the Time. l Press + (B8) or - (B9) buttons to adjust the setting and press MODE button
(B4) to confirm each setting. l The setting sequence is shown as follow: Hour, Minutes, Second, Year, Month/Day sequence, Month, Day, DST on or off. l The Time Setting Mode will automatically exit in 5 seconds without any adjustment. 12/24 Hour Display mode:
Press 12/24 button(B8) to select 12 or 24 hours mode. Time Zone Setting:
Hold ALARM ON/OFF button (B3) for 3 seconds to select the 4 difference USA time zone. Indicated by Snooze Alarm Clock Function:
l Press MODE button (B4) to select to view:
on LCD Time Alarm Time1 (
Shown on the LCD) Alarm Time 2 Shown on the LCD)
l When viewing Alarm Time 1 or Alarm Time 2, hold MODE button (B4) for 3 seconds to enter that Alarm Time setting. Press + (B8) or - (B9) buttons to adjust the alarm time. l When viewing Alarm Time 1 or Alarm Time 2, press ALARM ON/OFF (B3) button to switch that alarm on or off. If it is on, LCD. or shown on the l When Alarming, press SNOOZE / LIGHT button (B1) to enable the snooze alarm. Snoozes alarm snoozes for 5 minutes, then it alarms again. l Press any button to stop the snooze alarm. Weather Forecast Function:
l After Batteries inserted, or holding WEATHER button (B5) for 3 seconds, weather icon Flash (LCD-A1). Enter the current weather by pressing buttons (B6). Press WEATHER button (B5) to confirm the setting. The weather forecast may not be accurate if the current weather entered is not correct. l Totally 5 different weather in the weather forecast. means Sunny . means Slightly Cloudy. means Cloudy. means Rainy means Cloudburst. l If there is any inconsistency of weather forecast between Local Weather Station and this unit, the Local Weather Station's forecast should prevail. l The trend pointer displayed on the LCD indicates the trend of the Barometric pressure. indicates the barometric pressure trend is increasing. indicates the barometric pressure trend is steady. indicates the barometric pressure trend is decreasing. Maximum/Minimum Outdoor Temperature and Humidity Recording Function:
l Press MAX/MIN button (B2) to show the maximum recorded Outdoor Temperature and Humidity reading. is shown on the LCD l Press MAX/MIN button (B2) again to show the minimum recorded Outdoor Temperature and Outdoor Humidity reading. is shown on the LCD. l Hold MAX/MIN button (B2) for 3 seconds to clear the recorded maximum and minimum reading. Thermometer:
l Press IN C / F button (B6) to select Indoor Temperature in Celsius mode/
Fahrenheit mode. l Press OUT C / F button (B9) to select Outdoor Temperature in Celsius mode/
Fahrenheit mode. Outdoor Thermo & Hygro Sensor Unit Registration Procedure:
l The main unit automatically starts receiving transmission from outdoor thermo &
Hygro sensor unit for outdoor temperature and Humidity after new batteries are inserted. l The thermo & Hygro sensor will automatically transmit temperature and humidity to the main unit after batteries inserted. Batteries compartment of thermo sensor is locating behind the back cover, unscrews to open. l For having more than one external transmitter (Maximum3), select the Channel, CH1, CH2 or CH3 to ensure each sensor is transmitting difference channel before inserting batteries. The channel selecting switch (D6) is at the back of the thermo sensor. l Press TX button (D7) on the thermo sensor unit to transmit temperature and humidity to the main unit manually. The main unit gives a beep sound if it received the signal Display Outdoor Temperature and Humidity:
l Press CHANNEL button (B10) to view the 3 Channels temperature and humidity. The sequence is shown as follow:
Press Press Press CHANNEL button CHANNEL button CHANNEL button Display the three channels alternatively l Hold CHANNEL button (B10) for 3 seconds to cancel unused channel manually. It will automatically register a new channel again if a new channel is received. If there is no temperature and humidity displayed in existing channel ( - - . is displayed on the LCD ), hold CHANNEL button (B10) for 3 seconds to cancel that channel and receive the channel again, a BI sound can be heard. l The trend pointer displayed on the LCD indicates the trend of the outdoor temperature. indicates the outdoor temperature is increasing. indicates the outdoor temperature is steady. indicates the outdoor temperature is decreasing. l Press C /F button (D5), on the Thermo Sensor unit, to select Thermo Sensor displayed in Celsius mode or Fahrenheit mode. The use of 10 feet cord Temperature Probe:
l Insert the probe to the plug on the right hand side of the Thermo and Hydro Sensor Unit. l Put the metal casing outside and leave the Thermo and Hydro Sensor Unit in a indoor area to avoid freezing up the battery when the outdoor temperature is below -20 C. l Always use the temperature probe to sense the temperature when the temperature is between the following range:
-50 C ~ 0C and +50C ~ + 70C Outdoor Temperature Alert Function:
l Hold ALERT button (B7) for 3 seconds to enter Temperature Alert setting, Temperatures digits flash. l Press + (B8) or - (B9) button to select setting the Outdoor CH1, CH2 and CH3 temperature alert. Press ALERT button (B7) to confirm the setting. l Press + (B8) or - (B9) button to set the upper and lower the temperature. Press ALERT button (B9) to confirm the setting. limit of l Press ALERT button to set the Temperature Alert function on or off (
appears on the LCD if this function is on). Low batteries indicator:
Low battery icon appear at outdoor temperature row in particular channel indicating the external transmitter of the channel in low battery status. Batteries should be replaced. Moon Phase Indication The Moon Phase of each day is shown on the LCD. A: New Moon B: Waxing Crescent C: First Quarter D: Waxing Gibbous E: Full Moon F: Waning Gibbous G: Last Quarter H: Waning Crescent Back Light:
l Press SNOOZE/LIGHT button, back light states for 5 seconds. Note:
l Use a pin to press the reset button if the Unit does not work properly. l Avoid placing the clock near interference sources/metal frames such as computer or TV sets. l The clock loses its time information when the battery is removed. l Buttons will not function while scanning for WWVB time signal or Thermo sensors signal unless they are well received or stopped manually. l All Setting Mode will automatically exit in 5 seconds without any adjustment.