KW9007W-S/M (2) WEATHER STATION (WWVB VERSION RC-NONE) USER MANUAL 1. Features 1.1 Weather Forecast 1.2 Time
Sunny, Slightly Cloudy, Cloudy, Rainy and Snow animation
- 12/24 hour user selectable
- Dual Daily Alarm function
- Daily Sunrise/Sunset, Moonrise/Moonset time for 3 countries
- Moon Phase display
- Day of week in 8 languages user selectable Perpetual Calendar Up to Year 2099 1.3 Barometric Pressure - Current and past 12hr Absolute and Relative Barometric Barometric Pressure bar chart
- Measures mb/hPa, inHg &mmHg user selectable Pressure reading
- Measurable range: 20 ~ 99%
- Max/Min Memory
- Indoor measurable range: 0 ~ 50C [+32 ~ +122F]
- Measures C / F user selectable
- Outdoor measurable range: -20 ~ 50C [-4 ~ +122F]
- Max/Min Memory [indoor & outdoor]
Low-battery indicator for Outdoor Thermo Sensor
- Wall Mount or Table Stand
- One Wireless Thermo Sensor Included 1.3 Humidity 1.4 Temperature 1.5 Wireless Outdoor Sensor -
433MHz RF transmitting frequency 30 meter [98 feet] transmission range in an open area 1 2. Main Unit Appearance A12: Barometric pressure of previous hour A13: Absolute/Relative Barometric Pressure Reading 2.1 Part A- LCD A1: Air Pressure Trend A2: Weather Forecast A3: Barometric Pressure Bar Graph A4: Indoor Temperature A5: Indoor Humidity A6: Comfort Indicator Bar A7: Outdoor Temperature Trend A8: Outdoor Temperature A9: Selected Channel A10: Outdoor Humidity A11: Outdoor Humidity Trend A14: Time A15: Date A16: Day Of Week A17: Sunrise Time A18: Moonrise Time A19: Moon phase A20: Location A21: Moonset Time A22: Sunset Time 2.2 Part B- Buttons B1: MODE button B2: / (12/24) button B3: SNOOZE/LIGHT button B4: button B5: AL ON/OFF button B6: CHANNEL button B7: HISTORY/WEATHER button B8: +/C/F button B9: -/MAX/MIN button B10: RELATIVE/ABSOLUT button B11: SUN/MOON button B12: RESET button 2 2.3 Part C- Structure C1: Wall Mount Hole C2: Battery Cover C3: Stand 3. Outdoor Thermo Sensor D1: Transmission Indication LED D2: Outdoor Temperature display D3: Outdoor Humidity display D4: Battery Compartment D5: Wall Mount Hole D6: RESET button D7: C/F button D8: Channel Select Switch D9: Stand 4. Getting Started:
4.1 Main Unit:
Open main unit battery compartment cover [C2]
Insert 3 x AA batteries observing polarity [ + and marks]
Replace main unit battery compartment cover [C2]
Use a pin to press the RESET [B12] button on the rear of the main unit, the main unit is now ready for use 4.2 Outdoor Thermo Sensor
Batteries compartment (D4) of thermo sensor is locating behind the back cover, unscrews the batteries cover to open. Insert 2 x AAA batteries observing polarity [ + and marks]
3
5. Installation 5.1 Main Unit The main unit can be placed onto any flat surface (C3), or wall mounted by the hanging hole (C1) at the back of the unit. 5.2 Outdoor Thermo sensor The remote sensor should be securely mounted onto a horizontal surface. Note: Transmissions between receiver and transmitter can reach up to 30m in open area. Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage lines, etc. 6. Weather Forecast Function 6.1 Operation
After Batteries inserted, or holding WEATHER button (B7) for 3 seconds, weather icon flash (A2) on the LCD. Enter the current weather by pressing - (B9) or + (B8) button. Press WEATHER (B7) button to confirm the setting. The weather forecast may not be accurate if the current weather entered is not correct.
The current weather status should be entered again if the altitude of the Main Unit is changed. (Barometric pressure is lower at higher altitude location. Therefore, altitude change will affect the weather forecast). The weather station will start the first forecast at 6 hours later after the current weather status is entered. 6.2 Weather Conditions There are totally 5 different weather status animations in the weather forecast. Slightly Cloudy Cloudy Sunny Rain Freezing or Snow 4 Note:
is shown if the weather forecast is Rainy and Freezing or Snow outdoor temperature (any channel) under 0C. is shown if the outdoor temperature (any channel) is Frost Alert:
between -2C ~ +3 C If there is any inconsistency of weather forecast between Local Weather Station and this unit, the Local Weather Station's forecast should prevail. The manufacture will not hold responsible for any trouble that may come up due to wrong forecasting from this unit.
7. Barometric Pressure Reading 7.1 Barometric Trend Pointer (A1) The trend pointer displayed on the LCD (A1) indicates the trend of the Barometric pressure. Indicating the barometric pressure trend is rising Indicating the barometric pressure trend is steady Indicating the barometric pressure trend is falling 7.2 Absolute / Relative Air Pressure
Press the Absolute / Relative button [B10] to toggle between Absolute or Relative pressure display. ABS is shown for Absolute Pressure; REL is shown for Relative pressure
Absolute pressure is the actual pressure measured by the Main Unit
When viewing Relative pressure, hold Absolute/Relative button
[B10] for 3 seconds, press - (B9) or + (B8) button to adjust, press Absolute / Relative button [B10] to confirm. Note: Check your local weather station for Sea Level pressure information 7.3 Past Hour Air Pressure (History) Reading
Press HISTORY button [B7] to view the past 12 hours Barometric Pressure history. The hour is indicated on LCD [A12]
Press HISTORY button 5
0 HR = Current Barometric Pressure Reading
-1HR = Barometric Pressure Reading in 1 hour ago
-2HR = Barometric Pressure Reading ago ..etc in 2 hour
Hold + button [B8] for 3 seconds to select the unit for barometric pressure meter in hPa, inHg or mmHG. 7.4 Barometric Pressure Bar Graph The Barometric Pressure Reading at 0hr, 2hr,-4hr,-8hr,-12hr is recorded and shown on Barometric Pressure Bar Graph [A3]. The Graph is displayed in both hPa and inHg 8. Thermometer 8.1 RF Transmission Procedure:
The main unit automatically starts receiving transmission from outdoor thermo sensor for outdoor temperature after weather condition setting. The thermo sensor unit will automatically transmit temperature to the main unit after batteries inserted. For having more than one external transmitter (Maximum3), select the Channel, CH1, CH2 or CH3 to ensure each sensor is transmitting difference channel before inserting batteries. The channel select switch (D8) is at the back of the thermo sensor. If main unit failed to receive transmission from outdoor thermo sensor in first 3 minutes after the batteries inserted (- - . display on the LCD), hold Channel button (B6) for 3 seconds to receive transmission manually. RF icon flashes on the LCD
(B7), +/C/F Note: WEATHER/HISTROY
(B8), -/MAX/MIN(B9), ABSOLUTE/RELATIVE (B10) buttons will not function while scanning for thermo sensors signal unless they are well received or stopped manually. 8.2 Temperature & Humidity
(1) Outdoor Temperature--- Channel Selection
Press CHANNEL button (B6) to view the 3 Channels temperature &
humidity. The sequence is shown as follow:
PRESS CHANNEL button PRESS CHANNEL button PRESS CHANNEL button 6 Display the three channels alternatively
When viewing the record on CHANNEL 1 or 2, or 3, hold CHANNEL button (B6) for 3 seconds to cancel the record on this channel manually, and receive the transmission automatically again.
(2) Maximum / Minimum Temperature and Humidity
Press MAX/MIN button (B9) to show the maximum recorded Indoor
/Outdoor Temperature and Humidity. MAX is shown on the LCD
Press MAX/MIN button (B9) again to show the minimum recorded Indoor/Outdoor Temperature and Humidity. MIN is shown on the LCD.
(3) Outdoor Temperature Trend
The trend pointer (A7) displayed on the LCD indicates the trend of the outdoor temperature. Indicating the outdoor temp. is rising Indicating the outdoor temp. is steady Indicating the outdoor temp. is falling
(4) Outdoor Humidity Trend
The trend pointer (A11) displayed on the LCD indicates the trend of the outdoor humidity. Indicating the outdoor humidity is rising Indicating the outdoor humidity is steady Indicating the outdoor humidity down
(5) Celsius / Fahrenheit
Press C /F button (B8) to select Indoor/Outdoor Temperature in Celsius mode or Fahrenheit mode. If the temperature is out of the measurable range, LL.L (beyond the minimum temperature) or HH.H (beyond the maximum temperature) 7
will be shown on the LCD. for
(A6) Indicator Bar
(6) Comfort the display of pleasant/unpleasant climate, when the black dot in green zone means pleasant climate. 9. Time and Alarm Setting 9.1 Manual Time Setting:
Hold MODE button (B1) for 3 seconds to enter Clock/Calendar setting mode.
Press (B2) or (B4) button to adjust the setting and press MODE button (B1) to confirm each setting.
(By keeping the (B2) or (B4) button pressed, could accelerate the process and reach the desired value more quickly)
The setting sequence is shown as follow: Hour, Minutes, Second, Year, Month, Day, Country, City. Note:
(1) Second adjusted to zero only.
(2) The Time Setting Mode will automatically exit in 15 seconds without any adjustment.
(3) To turn DST (Daylight Savings Time) on or off, press and hold the /
(12/24) (B2) button. When DST is displayed above the minute digits Daylight Savings Time is turned on. The sunrise/sunset times will adjust accordingly. 9.2 12/24 Hour Display mode:
Press 12/24 button (B2) to select 12 or 24 hours mode. 9.3 Dual Daily Alarm Function:
Press MODE button (B1) to select to view:
Time Alarm Time1 (Alarm Icon flash on the LCD) Alarm Time2 (Alarm Icon flash on the LCD) Year
When viewing Alarm Time 1 or Alarm Time 2, hold MODE button
(B1) for 3 seconds to enter that Alarm Time setting. Press (B2) or 8
(B4) button to adjust the alarm time, press MODE button (B1) to confirm the setting.
When viewing Alarm Time 1 or Alarm Time 2, press AL ON/OFF (B5) button to activate the alarm function. Alarm icon will be shown on the LCD. Press AL ON/OFF (B5) button again to or deactivate the alarm function, the alarm icon disappear from the display. or
When Alarming, press SNOOZE / LIGHT button (B3) to activate the
) flashes on LCD. The snooze alarm, alarm icon (
alarm will snooze for 5 minutes, then it alarms again. This snooze function can be enabled for maximum 7 times. or
Press any of MODE (B1) /12/24 (B2), (B4), AL ON/OFF (B5), OR SUN/MOON (B11) button to stop the snooze alarm. Otherwise, the alarm signal sounds then stops automatically. for about 2 minutes, 10. Sunrise/Sunset, Moonrise/Moonset Time Display Function
After setting the Calendar, Local Country and home city in the Time Setting Mode, the Sunrise/Sunset
&Moonrise/Moonset. The Sunrise/Sunset & Moonrise/Moonset time digits blink during the calculation. the main unit calculates
Press the SUN/MOON button (B11) to the display the total Sun Hours of the select day.
Hold the SUN/MOON button (B11) for 3 seconds to enter Sunrise/
Sunset, Moonrise/Moonset Time search mode, location digits (A20) blink.
After
Enter the Country, City, Year, Month and Day which you would like to check. Press the [B2] or [B4] button to adjust and press the SUN/MOON button (B11) to confirm setting. The Sunrise / Sunset, Moonrise/Moonset time digits blink during the calculation. and Moonset/Moonrise time is shown. If moonrise or moonset occurs at next day, then MOONRISE +1 or MOONSET +1 will be displayed. If there is no moonrise or moonset occur on someday, Note: The Sunrise/Sunset and Moonrise/ Moonset time display is just for reference only. For exact Sunrise/Sunset and Moonrise/Moonset 9 will be displayed on the LCD Sunrise/Sunset calculation,
time, please refer to your Local Weather Station 11. Moon Phase Display The Moon Phase (A19) of each day is shown on the LCD. New Moon B: Waxing Crescent A:
C: First Quarter D: Waxing Gibbous E: Full Moon F: Waning Gibbous G:
12. Low battery indication:
Last Quarter H: Waning Crescent The low battery icon will appear at particular channel indicating that thermo sensor unit of the channel is in low battery status. The batteries should be replaced. 13. Backlight Press SNOOZE/LIGHT button (B3), back light states for 3 seconds. 14. Precautions
Use a pin to press the reset button (B12) if the Unit does not work properly.
Avoid placing the clock near interference sources/metal frames such as computer or TV sets. The clock loses its time information when the battery is removed.
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet
areas The outdoor sensor must not be set up and installed under water. Set it up in away direct sunlight and Rain
Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning agents may scratch plastic parts and corrode electronic 10
circuits If there is any inconsistency of weather forecast between Local Weather Station and this unit, the Local Weather Station's forecast should prevail. The manufacturer will not take responsible for incorrect forecasting from this unit 15. Specifications Indoor Data:
Temperature range:
Temperature Units M Humidity Range:
d Air Pressure Range:
Air Pressure Units M Weather Forecast:
d Outdoor Data:
Transmission distance:
(open area) Temperature range:
Mount:
i Main Unit Dimensions:
Thermo Sensor Di Battery Requirements:
Base Station [indoor]:
Sensors [outdoor]:
0 to 50C [+32 to +122F]
C or F [switchable]
20% to 99%
850 1050 hPa mb/hPa, inHg & mmHG [switchable]
5 icons [sunny, slightly cloudy, cloudy, rainy & snow]
30m @ 433MHz
-20C to 50C [-4 to +122F]
wall / table W230 x h150 x d30 mm w62 x h101 x d24 mm 3 x AA batteries 2 x AAA batteries Countries and Cities: there are 3 countries can be chosen from the Time Setting Mode. They are listed in the following table. USA Alaska Juneau Alabama Birmingham Gadsden Montgomery Mobile Mississippi Greenwood GWO Huntsville HUV JAN Jackson TUP Tupelo Montana MT BIL Billings Ft. Peck FTP Iowa Waterloo Des Moines Davenport Sioux City Idaho Boise Gibbonsville USA AK JNU AL BHM GAD MGM MOB IA ALO DSM DVN SUX ID BOI GIB MS 11 Arkansas AR Fort Smith FSM Little Rock LIT Texarkana TXK Arizona AZ Flagstaff FLG Phoenix PHX Tucson TUS Yuma YUM California CA Bakersfield BFL Blythe BLH Eureka EKA Fresno FAT Fort Bragg FTB Los Angeles LAX Redding ROD Sacramento SAC San Diego SAN San Bernardino SBD San Francisco SFO Colorado CO Denver DEN Durango DRO Fort Collins FNL Grand Junction GJT Burlington ITR Pueblo PUB Connecticut CT Hartford HFD District of Columbia DC Washington Delaware Dover Florida Key West Jacksonville Miami Orlando Pensacola DCA DE 0N5 FLG EYW JAX MIA ORL PNS Pocatello PIH Sandpoint SZT Illinois IL Champaign CMI Chicago ORD Springfield SPI Indiana IN Evansville EVV Terre Haute HUF Indianapolis IND South Bend SBN Kansas KS Dodge City DDC Wichita K32 Kansas City KCK Wakeeney OH1 Topeka TOP Kentucky KY Frankfort FFT Lexington LEX Louisville LOU Louisiana LA Baton Rouge BTR Lake Charles CWF Natchitoches IER New Orleans NEW Shreveport SHV Massachusetts MA BOS Boston Maryland MD BWI Baltimore ME Maine Augusta AUG BGR Bangor CAR Caribou Portland PWM MIA Michigan Kalamazoo AZO DET Detroit Flint FNT Great Falls GFT Helena HLN Sidney SDY Whitefish WTF North Carolina NC AVL Asheville Charlotte CLT FAY Fayetteville Wilmington ILM Winston-Salem INT MCZ Williamston RDU Raleigh North Dakota ND BIS Bismarck Bowbells BWB FAR Fargo GFK Grand Forks Nebraska NE Grand Island GRI LNK Lincoin Omaha OMA SNY Sidney Valentine VTN New Hampshire NH CON Concord NJ New Jersey EWR Newark TTN Trenton New Mexico NM Albuquerque ABQ Magdalene MAG ROW Roswell Raton RTN SAF Santa Fe NV Nevada Austin AIN CXP Carson City Ely ELY LAS Las Vegas Wells LWL 12 LAN Lansing PZQ Rogers City SAW Marquette TVC Traverse City MN Minnesota AEL Albert Lea BJI Bemidji Duluth DLH Grand Protage GPO International Falls INL STP St. Paul Missouri MO JEF Jefferson City MKC Kansas City Memphis MPH POF Poplar Bluff SGF Springfield STL St. Louis TLH TPA GA ABY AGS ATL CSG MAC SAV HI HNL ITO OGC WAI Reno RNO New York NY Albany ALB Buffalo BUF New York City JFK LKP Lake Placid Syracuse SYR OH Ohio Cleveland CLE CMH Columbus ISZ Cincinnati Toledo TOL YNG Youngstown OK Oklahoma Boise City 17K Lawton LAW Oklahoma City OKC Tulsa TUL OR BNO EUG MFR PDX SLE PA CXY PHL Utah Saline St. George Salt Lake City Thompson Virginia Vienna Lynchburg Norfolk UT SAL SGU SLC TSN VA DON LYH ORF West Virginia WV Charleston CRW Wheeling HLG Wyoming WY Buffalo BYG Casper CPR Cheyenne CYS Little America LAA West Yellowstone WYE 13 Tallahassee Tampa Georgia Albany Augusta Atlanta Columbus Macon Savanna Hawaii Honolulu Hilo Kahului Waimea Oregon Burns Eugene Medford Portland Salem Pennsylvania Harrisburg Philadelphia RIC ROA VT BTV MPR WA ABE ALW KTF Richmond Roanoke Vermont Burlington Montpelier Washington Aberdeen Walla Walla Kettle Falls Mount Vernon MVN OLM Olympia Seattle SEA SFF Spokane TON Tonasket Yakima YKM WI Wisconsin AUW Wausau Green Bay GRB LSE La Crosse MSN Madison Milwaukee MWC SSQ Spooner PIT SCR PR SJU RI PVD SCR CHS CUB GMU SD FSD PIR RAP TN BNA CHA DKX MFR TX ABI AMA AUS BRO DFW ELP HOU LRD ODO SAT Pittsburgh Scranton Puerto Rico San Juan Rhode Island Providence South Carolina Charleston Columbia Greenville South Dakota Sioux Falls Pierre Rapid City Tennessee Nashville Chattanooga Knoxville Memphis Texas Abilene Amarillo Austin Brownsville Dallas/Ft. Worth El Paso Houston Laredo Odessa San Antonio Canada CAN Calgary CAL Charlotte Town CHT Edmonton EDM FRE Fredericton HAL Halifax Montreal MON OTT Ottawa Quebec QUE REG Regina SUD Sudbury Thunder Bay THU TOR Toronto VAN Vancouver Winnipeg WIN Mexico MEX CHH Chihuahua Durango DUR GUA Guadalupe HER Hermosillo Mexico City MEC 14 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 15