The device is restricted for indoor use only when it operates in 5150-5250 MHz band.
Front Panel & LEDs
There are Light-Emitting-Diodes (LEDs) located on the front panel to indicate the status information of cable modem.
Rear Panel and Hardware Connection
The following describes the proper steps for connecting your cable modem. Please be sure to follow the steps in the sequence
outlined below. Failure to do so could result in improper operation or failure of your cable modem.
Accessing the Web Management
For easy-changing the default settings, a Web-based GUI is built-in for your access.
Use the following procedures to login to your CBV384Z4-AC1600MP .
1. Open your web browser.
2. Type the default IP address of the CBV384Z4-AC1600MP (http://192.168.20.1) and press Enter.
3. The Log In page appears. Type the user name (admin) and your password (password) in the respective fields.
Configuring Your WAN Connection
The DHCP page allows you to activate/deactivate the DHCP server function of the CBV384Z4-AC1600MP , and, if the DHCP
server is activated, to see DHCP leases it has provided.
Check your CBV384Z4-AC1600MP Access Information
There is a label pasted to the bottom of CBV384Z4-AC1600MP case. In that label, you can obtain following information. Please note,
following label is just an example, each CBV384Z4-AC1600MP has their own label and setting value. Please follow your label
information to access and configure CBV384Z4-AC1600MP.In normal case, you don’t need to change anything, all setting have
been set and work properly.
SSID: This is used for your CBV384Z4-AC1600MP wireless setting use, and, this setting has already been set to your
CBV384Z4-AC1600MP.
WPA Pre-Shared Key: This is the password for your wireless client when connecting to CBV384Z4-AC1600MP. You will be asked
to key in this password so as to connect via wireless connection.Web Management: This is the
URL when you like to access to CBV384Z4-AC1600MP. You can simply type http://192.168.20.1 in
Microsoft Internet Explorer or any other internet browser to access CBV384Z4-AC1600MP web
Login: This is the value when accessing CBV384Z4-AC1600MP web management page. You will be asked to key in this default
management page.
value to access CBV384Z4-AC1600MP.
Password: This is the value when accessing CBV384Z4-AC1600MP web management page. You will be asked to key in this
default value to access CBV384Z4-AC1600MP.
This document is subject to change without notice 7MN-I384G1-XXXR
Note to CATV Sysrem Installer
"The EUT must be bonding the screen of the coaxial cable to the earth at the building entrance per ANSI/NFPA 70, the National
Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable.”
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body
FCC RF Radiation Exposure Statement:
This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Statement
This device complies with Class B Part 15 of the FCC Rules. The device generates, uses and can radiate radio frequency energy
and, if not installed and used as instructed, may cause harmful interference to radio communication. Only Coaxial cables are to be
used with this device in order to ensure compliance with FCC emissions limits. Accessories connected to this device by the user
must comply with FCC Class B limits. The manufacturer is not responsible for any interference which results from use of improper
cables, or which results from unauthorized changes or modifications to the device.
CAUTION:
"A Minimum 26 AWG Line Core should be used for connection to the cable modem" this device may not cause interference and this
device must accept any interference, including interference that may cause undesired operation of the device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC RF
exposure compliance requirements, please follow operation instruction as documented in this manual.
Warranty
Items sold by manufacturer/distributor/agent, hereinafter called "Seller", are warranted only as follows: Except as noted below Seller
will correct, either by repair or replacement at its option, any defect of material or workmanship which develops within one year after
delivery of the item to the original Buyer provided that evaluation and inspection by Seller discloses that such defect developed
under normal and proper use. Repaired or replaced items will be further warranted for the unexpired term of their original warranty.
All items claimed defective must be returned to Seller, transportation charges prepaid, and will be returned to the Buyer with
transportation charges collect unless evaluation proves the item to be defective and that the Seller is responsible for the defect. In
that case, Seller will return to Buyer with transportation charge prepaid. Seller may elect to evaluate and repair defective items at the
Buyer's site. Seller may charge Buyer a fee (including travel expenses, if needed) to cover the cost of evaluation if the evaluation
shows that the items are not defective or that they are defective for reasons beyond the scope of this warranty.
The Seller makes no warranty concerning components or accessories not manufactured by it. However, in the event of failure of
such a part, Seller will give reasonable assistance to Buyer in obtaining from the manufacturer whatever adjustment is reasonable in
light of the manufacturer's own warranty. Seller will not assume expense or liability for repairs made outside the factory by other than
Seller's employees without Seller's written consent.
SELLER IS NOT RESPONSIBLE FOR DAMAGE TO ANY ASSOCIATED EQUIPMENT, NOR WILL SELLER BE HELD LIABLE
FOR INCIDENTAL, CONSEQUENTIAL, OR OTHER DAMAGES. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES
EXPRESSED OR IMPLIED INCLUDING THE IMPLIED WARRANTY OF "MERCHANTABILITY" AND "FITNESS FOR
PARTICULAR PURPOSE."
Trademarks
All trademarks are the property of their respective owners.