CASTLES TECHNOLOGY
S1EB Cradle
User Manual
Confidential
Version 1.6
June 2021
CERT-SATURN1000-08-02-02-V1.6
Castles Technology Co., Ltd.
6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District,
New Taipei City 23143, Taiwan R.O.C.
http://www.castech.com.tw
WARNING
Information in this document is subject to change without prior notice.
No part of this publication may be reproduced, transmitted, stored in a retrieval system,
nor translated into any human or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the
prior written permission of Castles Technology Co., Ltd.
All trademarks mentioned are proprietary to their respective owners.
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 2
2021-05-27 Caution in introduction added, hw-202105
Tommy
Revision History
Version
Date
Descriptions
1.3
1.4
1.5
2021-06-23
spec, hw-202105
2021-06-30
appendix,
1.6
2021-07-13
Update Radiation Exposure Statement
Remove Charging Discharging temp
Author
Wira
Wira
John
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 3
Contents
1.
Introduction .................................................................................................................. 5
2. Hardware Setup ............................................................................................................ 6
2.1. Parts of S1EB ...................................................................................................... 6
2.2. Turn on S1EB ...................................................................................................... 8
2.3. Charge with S1EB ............................................................................................... 9
2.4. S1EB Cradle app ............................................................................................... 10
2.4.1. S1EB Connection mode USB ................................................................. 10
2.4.2. S1EB Connection mode (Wi-Fi) ............................................................. 11
2.4.3. S1EB Connection to Ethernet................................................................. 13
3. Appendix .................................................................................................................... 15
3.1. S1EB Specifications .......................................................................................... 15
3.2. FCC Statement .................................................................................................. 16
3.3. CE Statement .................................................................................................... 17
3.4. UL 62368 Safety Warning: ................................................................................. 17
3.5. Safety Warning for External Power Source ........................................................ 17
3.6. Canada IC Warning ........................................................................................... 18
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 4
1. Introduction
This document provides a guideline for operating and configuring of S1EB.
1) Waring: Power cord shall be connected to a socket-outlet with earthing
connection.
2) This product is intended to be supplied by a Listed Power Adapter(Lucent
Trans Electronics Co Ltd, type PW04-945A) "L.P.S." (or "Limited Power
Source"), rated 9 Vdc, 4.5 A minimum, Tma = 40 degree C minimum.
3) CAUTION: To reduce the risk of fire, use only 26 AWG or larger (e.g., 24 AWG)
UL Listed Telecommunication line cord.
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 5
2. Hardware Setup
2.1. Parts of S1EB
Front/Top
1
S1EB
1. Magnetic Stripe Reader
2. Charger pin
3. Power Indicator
2
3
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 6
Rear /Bottom
4
5
6
7
8
9
S1EB
4. Power Switch Button
5. Modem Port (reserved for engineering usage only)
6. USB Port1/2
7. COM Port
8. Ethernet Port
9. Power Connector
Left side
Right side
S1EB
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 7
2.2. Turn on S1EB
Step 1
Step 2
Step 3
S1EB
Step 1: Plug in Power Supplies.
Step 2: Turn on the power
Step 3: The power indicator flashes Yellow light when starting up.
After S1EB initializes, it will continuous green light.
S1EB
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 8
2.3. Charge with S1EB
S1EB
Insert SATURN1000E into S1EB, then S1EB will start charging SATURN1000E.
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 9
2.4. S1EB Cradle app
User can use “Cradle app” to set up connection between Terminal and Cradle.
Connection from Terminal to Ethernet via Wi-fi.
2.4.1. S1EB Connection mode USB
Step 1. Open “Cradle app” and Click into “USB Setting”. Select your
requirements.
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 10
2.4.2. S1EB Connection mode (Wi-Fi)
Step 1: Select Cradle App
S1EB
Step 2: Click into “Wi-Fi Setting” and Check the Serial Number of S1EB
S1EB
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 11
Step 3: Find S1EB Name and enter Wi-Fi password on SATURN1000F
Note: Default Name for S1EB Wi-Fi is “CASWIFI_xxxxxxxxx(S/N)”.
Default password for S1EB Wi-Fi is “9876543210”.
Security: WPA2 PSK
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 12
2.4.3. S1EB Connection to Ethernet
Step 1: Make Sure the Wi-Fi connection between Android terminal and Cradle,
For more information, please refer to 2.4.2 S1EB Connection
mode(WiFi).
Step 2: After confirming connection between Android terminal and Cradle, go
back to “Cradle app” main menu and select “Wi-Fi Setting”.
S1EB
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 13
Step 3(Optional): The default setting of “DHCP” is On, if you want to set Static
IP address, switch off the “DHCP”.
After connected to Ethernet, you can get the Information by clicking “Cradle
S1EB
Info”
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 14
3. Appendix
3.1. S1EB Specifications
Object
Specification
MCU
Secure System on Chip with 1.18 DMIPS 400MHz
Internal Memory ROM 128KB, SRAM 256KB
Memory (Flash/RAM)
ROM from 128MB up to 256MB NAND Flash ROM
RAM from 64MB up to 128MB DDR SDRAM
Communication
Wi-Fi 802.11 b/g/n
Ethernet 10/100
Modem x 1
USB Type A x 2
RS232 x 1
Indicator
LED x 1
Power
DC Input: 9V/4.5A
Environment
Temperature:
Operating: 0°C~50°C,
Storage: -20°C ~70°C
Humidity:
Operating: 5%~90% non-condensing
Storage: 5%~90% non-condensing
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 15
3.2. FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Note: The country code selection is for non-US model only and is not available to all US
model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation
channels only.
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 16
3.3. CE Statement
This is a Class B product in a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
3.4. UL 62368 Safety Warning:
Warning: Power cord shall be connected to a socket-outlet with earthing
connection.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS
3.5. Safety Warning for External Power Source
To reduce potential safety issues, only the AC adapter provided with the product,
a replacement AC adapter provided by agency, or an AC adapter purchased as
an accessory from agency should be used with the product.
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 17
3.6. Canada IC Warning
ISED
Canadian Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject
to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
Avis Canadien
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Caution:
Exposure to Radio Frequency Radiation.
1. To comply with the Canadian RF exposure compliance requirements, this device and its
antenna must not be co-located or operating in conjunction with any other antenna or
transmitter.
2. To comply with RSS 102 RF exposure compliance requirements, a separation distance of
at least 5 mm must be maintained between the antenna of this device and all persons.
Attention: exposition au rayonnement radiofréquence.
1. Pour se conformer aux exigences de conformité RF canadienne l'exposition, cet appareil
et son antenne ne doivent pas être co-localisés ou fonctionnant en conjonction avec une
autre antenne ou transmetteur.
2. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de
séparation d'au moins 5 mm doit être maintenue entre l'antenne de cet appareil et toutes
les personnes.
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 18
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile satellite systems.
La bande 5 150-5 250 MHz est réservés uniquement pour une utilisation à l'intérieur afin de
réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux.
For the frequency 5600-5650 MHz, no operation is permitted
Pour la fréquence 5600-5650 MHz, aucune opération est autorisée.
Castles Technology Co., Ltd.
Confidential • All Right Reserved.
Pg. 19