CASTLES TECHNOLOGY V3CT3(2.4) POS Terminal Book 2 User Manual V3CT3(2.4) Confidential Version 1.0 Nov. 2023 CRTV30902V1.0CECBFCCICUL Castles Technology Co., Ltd. 6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan R.O.C. http://www.castech.com.tw Castles Technology Co., Ltd. Confidential All Right Reserved. 1 WARNING Information in this document is subject to change without prior notice. No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd. All trademarks mentioned are proprietary of their respective owners. Castles Technology Co., Ltd. Confidential All Right Reserved. 2 Revision History Version Date Descriptions 1.0 2023.11.06 Initial creation Author Yao Castles Technology Co., Ltd. Confidential All Right Reserved. 3 Contents 1. Introduction ...................................................................................................................... 5 2. Hardware Setup ............................................................................................................... 6 2.1. Parts of the Terminal ............................................................................................... 6 2.2. Inserting the SAM Card ........................................................................................... 8 2.3. Inserting the Memory card ....................................................................................... 9 2.4. Inserting the Paper Roll ......................................................................................... 10 3. Appendix ........................................................................................................................ 11 3.1. FCC ....................................................................................................................... 11 3.2. IC ........................................................................................................................... 12 3.3. UL / IEC 62368-1 ............................................................................................... 1312 Castles Technology Co., Ltd. Confidential All Right Reserved. 4 1. Introduction This document provides a guideline on operating and configuring Castles V3CT3(2.4) terminal. The scope of this document includes setting up the terminal, basic operation, application life cycle, and some advance features. Regulatory instruction of usage Before using the terminal, please check has it been disassembled, modified, or showed abnormal situation. If yes, please do not use. Please stay away from strong electromagnetic waves.
(Example) Microwave ovens, magnets, shoplifting prevention devices, high-voltage wires, automatic doors, communication antennas, etc. Condensation can occur when moving from a cold place to a warm place. If condensation occurs, do not use the unit until the connected water droplets evaporate. Static electricity may occur in some places (such as where you use a carpet). Please do not leave it in the sun for a long time. Please operate the unit carefully as it is a precision instrument. Do not apply impact, drop or heavy objects on top of the unit. Do not attach dust, oil, etc. to a part of the power terminal. Also, please do not scratch. Castles Technology Co., Ltd. Confidential All Right Reserved. 5 2. Hardware Setup 2.1. Parts of the Terminal Front 2 1 3 7 4 6 5 1. LCD Display (Color TFT) 5. Magnetic Stripe Reader 2. Keypad 3. Smart Card Reader 4. LED Indicator 6. Contactless Card Landing Zone 7. Paper Roll Handle Castles Technology Co., Ltd. Confidential All Right Reserved. 6 Rear 8 9 10 11 12 13 14 15 16 17 8. Com Port 2 9. Modem Port
(Reserved for engineering usage only) 10. USB Port 1 (Type C)
(Data transmission only) 11. USB Port 2 (Micro USB)
(5Vdc, 0.5A max.) 12. Product Label 13. DC Jack 14. Com Port 1 15. Back Cover 16. Micro SD Card Slot 17. SAM Card Slots 1-2 Left side Right side Castles Technology Co., Ltd. Confidential All Right Reserved. 7 2.2. Inserting the SAM Card Step 1: Remove back cover. Step 2:
Insert SAM card into desire slot. SAM 1 & 2 Gold contact at upper side of card and facing down. Step 3: Reverse the operation of step 1 to install the cover. Castles Technology Co., Ltd. Confidential All Right Reserved. 8 2.3. Inserting the Memory card Step 1: Remove back cover. Step 2: Insert Micro SD memory card. Micro SD:
Gold contact at lower side of card and facing down. Step 3: Reverse the operation of step 1 to install the battery cover. Castles Technology Co., Ltd. Confidential All Right Reserved. 9 2.4. Inserting the Paper Roll Step 3 Step 2 Step 1 Step 1: Pull up paper roll box handle. Step 2: Gentle open paper roll cover. Step 3: Insert paper roll as direction showed. Paper specification Width: 57mm Outside diameter: 40mm Castles Technology Co., Ltd. Confidential All Right Reserved. Pg. 10 3. Appendix 3.1. FCC Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Castles Technology Co., Ltd. Confidential All Right Reserved. Pg. 11 3.2. IC Industry Canada statement This device complies with ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis plus de 20cm entre le radiateur et votre corps. Castles Technology Co., Ltd. Confidential All Right Reserved. Pg. 12 3.3. UL / IEC 62368-1 Warning:
Power cord shall be connected to a socket-outlet with earthing connection. Warning:
Risk of explosion if battery is replaced by an incorrect type. Dispose of expended battery in accordance with local disposal regulations. Warning:
This product is intended to be supplied by a Listed Power Adapter "L.P.S." (Or
"Limited Power Source") and is rated at 9 Vdc, 4.5 A min., Tma = 40 degrees C. Attention:
le cordon d'alimentation doit tre branch sur une prise secteur avec mise la terre. Attention:
Risque d'explosion si la batterie est remplace par une de type incorrect liminer la pile usage conformment la rglementation locale en vigueur. Attention:
Le produit est destin tre aliment par un adaptateur secteur rpertori L.P.S.
(ou "Source d'alimentation limite") et est valu 9 Vdc, 4.5 A min., Tma = 40 degrs C. CAUTION:
To reduce the risk of fire, use only 26 AWG or larger(e.g., 24AWG) UL Listed Telecommunication line cord.
~END~
Castles Technology Co., Ltd. Confidential All Right Reserved. Pg. 13