RUNNING A SESSION 22 ASSIGNING MONITORS TO AN ATHLETE Prior to running a real-time session, its important each monitor is assigned to an athlete. The ID is found on the back of the monitor. To assign monitors to athletes, click on Settings in the top left corner, then Devices STARTING A REAL-TIME SESSION To run a real-time session, select New Activity from the main title menu. Your activity will be created in the timeline. Right click and select Edit to give the session a name. 23 Click the Play button to in the top right corner to start receiving data. The stream will change pattern when data is being received. Double-click on Active Players to show all athletes. By selecting all and +period, all athletes are added to the PIP. 24 Right click on the period to edit the period name on the fly. To stop all live periods, click the Stop ALL live periods button. To add a live period, click the Add live period button. 25 OpenField comes with pre-built dashboards to track a real-time session, but you can create your own. This can be done by simply clicking the + button to create a new dashboard. Creating and modifying widgets Then, by right clicking in the white space of the dashboard, select New Widget and the design you wish to use. Click and drag from the bottom right corner to re-size the widget. The parameters and title can be altered by clicking the Settings icon. 27 Parameters that you wish to view can be deleted or added from the drop down list on the left, or by searching. Click Build Query when done. To finish a real-time session, end all living running periods by clicking the Stop All live periods icon. Finishing a real-time session Once the periods have stopped, return to your home page and click Fast Sync to sync your live data up to the cloud for immediate reporting and feedback. 28 It is recommended that monitors are downloaded to the console before generating detailed reports. Reporting using real time There are two ways to view your real-time data:
1. Syncing your real-time session to view your data through the cloud. 2. Generating a CTR after finalizing the activity. To do this, right click on the activity and select Finalize Activity, then Export CTR. 29 FINISHING A SESSION 30 After you have received your monitors post-session, you will need to download the data and sync with the cloud. The data from the monitors allow calculation of our advanced algorithms to take place and any information missed while running real-time. TRANSFERRING DATA OFF MONITORS Plug in your monitors to the charge case and push each monitor into its slot one at a time. Only connect one charge case to the computer at a time. To view the download and import status of your connected monitors, click Data Transfer Once all monitors have downloaded, make sure all charge cases are disconnected from the computer. Return to the main menu and run your desired sync. 31 Asjusting periods can be done during or after the real-time session. It is highly recommended that any period editing is done on the console before syncing to the cloud. To edit any periods in the last activity you captured from the main title menu, select Last Activity. ADJUSTING PERIODS/ADDING NEW PERIODS To adjust the start or end time of an existing period, simply right click on the period you want to change and select Edit. To add a new period to a live session that has already finished, right click the activity and select New Period. Name the period and enter in the start and end time. Now add players to this period generated via Team, select the athletes you want to add, and then PIP. 32 If you want to re-assign a monitor to another athlete, click on the Start tile on the main menu. From the Activities panel, select the session you want to change. REASSIGNING MONITORS Click on Settings, then Devices and re-assign the monitor just for that session. For these changes to take effect in the cloud, right click on Activity and select Finalize. Then return to the main menu and Fast Sync. 33 THE WEB USER INTERFACE 36 After youve completed transferring your data to the cloud, you can in to your web account and start creating reports. OpenField enables customization of data to let a user make reporting as simple or complex as they choose it to be. OpenField cloud has a simple set-up that enables you to create reports, edit timeline, and filter activities. COMPONENTS AND FUNCTION Editing the timeline is done by right clicking the period or session. Athletes can be added by clicking on the period or activity and adding them in to PIP from Player Banks. Activities can be selected and filtered by clicking the Activity arrow on the top left. 37 SETTING UP A WIDGET Widgets can be added by clicking on the tiles and selecting Add New Widget. Configure the widgets design. Designs can also be altered after theyre created by clicking on the widgets Settings icon. Reports can be viewed in full screen by right clicking the title cbar and selecting View Full Screen 38 TROUBLESHOOTING 41 THE CATAPULT SPORTS FOLDER Located in your documents. Contains program settings and files. Log files Located in Documents, Catapult Sports, OpenField, Logs. Contains log information of your OpenField usage. 42 ULTRASONIC WELDED CASE Unit is splash proof but not waterproof. ANTENNA OptimEye S5 logo should always be facing up and away from athlete. ATHLETE ID STRIP Designed to write athletes name/playing number with permanent marker - which can be removed with alcohol swabs provided. BUTTON Turn on: Hold for two seconds. Turn off: Hold facing up, press/hold for three seconds DIMENSIONS Height 96mm, Width 52mm, Depth 14mm QUICK START GUIDE ATHLETE INITIAL USE LED LIGHTS When on, quickly push button to see battery status. Three lights mean full, two lights mean 2-4 hours remaining, one light means less than two hours. TOP LIGHT In case: Orange charging, green fully charged.
MIDDLE LIGHT In case: Shows active USB connection. On athlete: Shows heart rate has been within range for 60 seconds. BOTTOM LIGHT Shows when SmartBall is within range. 1. Turn on OptimEye S5. 2. Top LED will blink quickly, indicating it is ready for use with inertial sensors only and is searching for GPS signal. 3. Top LED will blink slowly, indicating GPS lock is attained and unit is ready for full use. 4. NOTE: 15-minute lock time only necessary for initial session or youve travelled more than 20 miles from location of previous session. It is recommended to wait 15 minutes after slow blink is attained for enhanced accuracy and performance. CHARGE CASE Install Catapult software. 1. 2. Place units in designated slots. 3. Plug in charge case to power outlet before plugging in to USB. 4. Please wait while drivers are installed. 5. Complete charge is 90 minutes or less. NORMAL USE Acceptance of OptimEye S5 means it will be used under normal use. Normal use includes placement on the thoracic region of the spine on pads or in a Catapult-approved padded pocket inside a compression garment -
and in a playing area free of electrical interference. This placement ensures optimal data reception and transmission, as well as athlete safety. Any other placement may void warranty or affect performance. OptimEye S5 is not a medical device. Please contact support@catapultsports.com for further information. APPENDIX Be sure to read the Warnings and Cautions at the conclusion of this document to learn to use your Optimeye System safely and responsibly. CE The CE mark us used to mark conformity with the European Union EMC directive 99/5/EC, 2004/108/EC and 2006/95/EC. FCC This device complies with Part 15 of the FCC Rules andIndustry Canadas licence-exempt RSSstandards. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the dev ice.
Le prsent appareil est conforme lasection15de larglementation FCC et CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Warning: Any changes or modi cations not expressively approved by Catapult Sports Pty Ltd could void the users authority to operate this equipment This section provides technical speci cations for the Optimeye Athlete Tracking system, consisting of Multi Charger Case &
Power Supply, Optimeye devices, and optional Optimeye Transceiver device. Technical Speci cations Multi Charger Case Power Supply North America United Kingdom, Australia Europe Japan All regions (output):
Physical Speci cations Dimensions:
Weight:
Environmental Speci cations Operating temperature:
Operating humidity:
Electromagnetic Emissions Meets requirements of:
Multi Charger Case All regions (input):
Physical Speci cations Dimensions:
Weight:
Environmental Speci cations Operating temperature:
Operating humidity:
Electromagnetic Emissions Meets requirements of:
120V, 60Hz, input 240V, 50Hz, input 230V, 50Hz, input 100V, 50/60Hz, input 24 V DC @ 8.4A output 170 x 85 x 42.5 mm (6.69 x 3.35 x 1.67 ) 1kg (2.2 lb) 0 to 40 C (32 to 104 F) 90% maximum relative humidity, noncondensing FCC Class B EN55022 Class B EN55024 Class B 24 V DC, input 550 x 330 x 220 mm (21.65 x 12.99 x 8.66 ) 4kg (8.8 lb) 0 to 40 C (32 to 104 F) 90% maximum relative humidity, noncondensing EN 55022, EN55024, EN 61000-3-2 EN 61000-3-3 AS/NZS CISPR 22 FCC Part15B Optimeye S5/X4 device All regions (input):
Physical Speci cations Dimensions:
Weight:
Environmental Speci cations Operating temperature:
Operating humidity:
Electromagnetic Emissions Meets requirements of:
5 V DC @ 1.05A max 96.5 x 52 x 14 mm (3.8 x 2.0 x 0.55 ) 0.067 kg (0.148 lb) 0 to 40 C (32 to 104 F) 90% maximum relative humidity, noncondensing EN 301 489-1,17,19 EN 300 328 EN 62209-2 EN 60950-1 AS/NZS CISPR 22 FCC Part 15B/C MPE (FCC SAR) ICES-003 RSS-210 RSS-102 Disposal of the Device Please dispose of the device in an appropriate way, treating it as electronic waste. Do not throw it in the garbage. If you wish, you can return the device to your nearest Catapults representative. Warnings and Cautions Warning Failure to avoid the following potentially hazardous situations may result an accident resulting in death or serious injury. The Optimeye contains a non-user replaceable, rechargeable lithium-ion battery. The battery may present a risk of re or chemical burn if mistreated. Do not recharge out of the unit, disassemble, heat above 60C, or incinerate Dispose of Optimeye properly. Contact your local waste disposal department for information on properly disposing of lithium-ion batteries. The Optimeye has no user-serviceable parts. Should you ever encounter a problem with your unit, please take it to an authorized Catapult representative for repairs. Always consult your physician before beginning or modifying any exercise program. If you have a pacemaker or other implanted electronic device, consult your physician before using the Optimeye system. Caution Failure to avoid the following potentially hazardous situations may result in injury or property damage. Use the Optimeye only as a performance monitoring aid. Do not attempt to use the Optimeye for any purpose requiring precise measurement of direction, distance, location, velocity or topography. This product should not be used to determine ground proximity for aircraft navigation. The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for its accuracy and maintenance. The governments system is subject to changes which could affect the accuracy and performance of all GPS equipment, including the Optimeye. Although the Optimeye is a precision navigation device, any navigation device can be misused or misinterpreted and, therefore, become unsafe. The Optimeye and its included heart rate monitoring circuit is a consumer device, not a medical device, and could suffer from interference from external electrical sources. The heart rate readings are for reference only and no responsibility can be accepted for the consequences of any erroneous readings.