PN 487-7440/7442 General
[Volume]
Select a band in the Radio
[Power On/Off]
Increase/Decrease the frequency.
[BAND]
Select a band in the Radio Power On/Off Set your vehicles Key to the ACC or ON position Power On: Press Power Off: Press Source Selection Press [AM], [FM], [DAB], [AUX], [BT] or [USB] to change the source. Volume Adjustment
(Setting range: 0 to 20, Default 10) Touch the Volume indicator. Right direction to increase the volume, and Left direction to decrease the volume. Radio Operation -AM/FM/DAB-
[BAND]
Select a band in the Radio
[TUNE]
Increase/Decrease the frequency.
[Preset Button]
Select a preset station in the radio source, preset the current station.(By holding it down by more than 2 seconds) Operation Flow 1. Press [AM] or [FM] to select a band. 2. Select station Frequency Adjustment Touch the indicator. (Right side: Higher, Left side: Lower) Preset Station Selection Press the preset channel button from 1 to 7 to tune in a preset station Station Preset The 7 stations with good reception will be manually saved in the memory under preset 1 to 7. Preset stations can be simply called up by pressing 1 to 7. Manual Preset Memory 1. Use tuning to find a station 2. Press and hold one of the preset button 1 through 7 on the screen by more than 2 seconds. USB/Bluetooth
[BAND]
Select a band in the Radio R Music Operation
[Audio File]
Select Audio File in the USB memory or iPOD.
[Play Time]
Indicate the play time Push the white circle to pause the sound
[Folder]
Select the Folder Operation Flow 1. Press [BT] or [USB] to select a band. 2. Connect the USB memory or iPOD to USB port. 3. When connect the USB memory or iPOD, the radio stream the sound automatically. 4. Folder Selection Touch the [Folder Select] and select the folder name. File Selection Touch the file name Pause Touch the white circle on the play time Bluetooth R - General
[Pairing]
Go to process of Pairing Operation Flow 1. Pairing
[Paired Devices]
Select the device which already was registered. Press the [Pairing] button to make this unit standby for pairing with waiting status. 2. Operate you Bluetooth device to input the PIN code for connection. (Default PIN code is 0000) Once pairing is successful, the registered Bluetooth device can automatically communication with this unit. Paired Devices Press Paired Devices button to delete the registered device. Note
If registration is not successfully completed within 1 minute, Time out appears.
If registration fails because of mismatched PIN code, BT PIN Error appears.
Depending on the communication status, it may take 5 to 40 seconds for device connection. Bluetooth R - Hands Free Phone-
[Phone]
Select a call or Bluetooth setting Phone Call Select the [Phone] and select the [Call]. And select the phone number. Phone Hanging Up Press during a call. Phone Answering/ Reject
[Incoming Call Message]
Indicate during a call incoming/
making a call
[Phone Answering]
Phone Answering
[Hanging Up]
Press button during a call incoming. The Incoming Call message blinks during a call incoming. Phone Reject/Hanging Up Press button when reject a call incoming or hang up a call. AUX Operation
[BAND]
Select a band in the Radio Operation Flow 1. Press [AUX]
2. Connect the Sound equipment via Stereo jack. 3. When connect the Sound equipment, the radio stream the sound automatically.