CTL-001 Series WCDMA/GPRS Wireless Data Terminal User manual 2017-02-01 Ver1.0 Cathay Tri-Tech.,inc Revision History Rev
. Revised content Comment Date Officer 1.0 First edition Create new 2017-02-01 CTT 1 Table of contents 4.1.1. 4.1.2. 1. Overview ...........................................................................3 2. Name of appearance and parts .......................................................4 2.1. Appearance ..................................................... !
2.2. Name of parts ..................................................................5 2.3. DIP switch setting .............................................................6 2.4. Earth processing at installation ...............................................7 3. Function specification .............................................................8 3.1. GPRS/3G network function .......................................................8 3.2. Router function ................................................................9 4. Operation maintenance function .................................................... 10 4.1. Operation setting function .................................................... 10 Operation guarantee browser ............................................. 10 Accesstosettingmenu ...................................................... 10 5. Setting menu screen specification ................................................. 11 5.1. Common specification .......................................................... 11 5.2. Main setting screen specification ............................................. 11 System information screen ............................................... 11 PPP setting ............................................................. 11 IP Calling setting ...................................... !
LAN setting ............................................................. 12 NAPT setting ............................................................ 12 DDNS setting ............................................................ 12 Packetfiltersetting ......................................................... 12 PING setting ............................................................ 12 RS232C setting .......................................................... 12 PLC setting ............................................................. 13 PIN setting ............................................. !
Change ID/ password ..................................................... 13 Remote operation setting ................................................ 13 Other setting ........................................... !
Enable setting .......................................... !
Maintenance setting ..................................................... 13 Firmware update ......................................................... 14 Logout .................................................................. 14 6. Specification table ............................................................... 15 5.2.1. 5.2.2. 5.2.3. 5.2.4. 5.2.5. 5.2.6. 5.2.7. 5.2.8. 5.2.9. 5.2.10. 5.2.11. 5.2.12. 5.2.13. 5.2.14. 5.2.15. 5.2.16. 5.2.17. 5.2.18. 2 1. Overview CTL-001 series device is router with wireless communication function that does IP connection via the mobile phone network 2G/3G of GPRS/W-CDMA system.Also, it has 10Base-T/100Base-TX LAN port and RS-232C serial interface as device interface. It serves IP network connection environment to connected device, and it is capable to communicate certain protocol data between different interfaces. This device has network router function connects local network or device to internet or closed network via the IP network of 2G/3G mobile phone network. It can realize several functions, service by making system with cloud computing network system (Hereinafter referred to as "cloud system".
) and closed network. Figure 1 shows a conceptual diagram of the network. Slave device Master device RS-232 CTL-001 Device LAN Various PLC etc 2G
/
3G Mobile network IP-VPN Server Internet ISP Data processing
/Service Figure 1 Conceptual diagram of system using this device 3 2. Name of appearance and parts 2.1. Appearance Appearance of this device indicated below
<Front face appearance <Back face appearance >
4 2.2. Name of parts Front face Front faceafter cover taken No Details of front Name Description Antenna terminal SIM card slot blindfold panel Power indicator LED "Green"
Communication status LED "Green"
LAN port status LED "Green"
IP Calling status LED "Green"
Wireless strength indication LED
"Green"
Serial status LED "Green"
Alarm indication LED "Red"
Micro USB terminal GPRS/3G antenna terminal Remove the panel and install the SIM card PowerOn Lights On , Power Off Lights Off Communicating Lights On In use Lights On IP incoming function enabled Lights On Disconnected Lights Off Communication strength Flashing or Lights On Connecting Lights On Device abnormality detection Lights On Terminal for connecting maintenance PC For setting:environmental response,internal setting initialization, firmware update Press the button Take SIM card holder off Insert the SIM card holder with the SIM card installed DIP switch PUSH button SIM card slot Back face No Details of back Name Description Molex connector for DC power supply EIAJ 2 standard connector for DC power supply Connect the 3 terminal power cable to supply power Connect the AC power to supply power LAN port RJ45 socket Lower LED Left: Terminal connection status Lower LED Light: Transmit / receive state Reset button Press the button Force reset RS-232C connector Connect RS-232C cable 5 2.3. DIP switch setting DIP switch placed under blindfold cover is for operation mode change Front DIP switch parts SW1 SW4 DIP switch setting specification OffFactory default On Start up with the current setting On startup:All setting items of this device to the Normal operation mode: Default factory shipment state 1 Prohibit firmware update of this device Allow firmware update of this device via the LAN via the LAN port 2 port Switch number SW 1 SW 2 SW 34 Detach internal GND and case Default Connect internal GND and case 6 2.4. Earth processing at installation When installing this equipment, it is recommended to ground using a ground wire to ensure safety and prevent noise influences. As shown in the figure below, install the ground wire so that the ground wire is sandwiched between the screw to attach the main body and the main body. Mounting screw Ground wire To a power outlet or a nearby ground terminal Body How to attach the ground wire 7 3. Function specification 3.1. GPRS/3G network function Items Specification Remarks Communication method Communication function Frequency band 2GGPRS/EDGE 3GW-CDMA/HSDPA CTL-001A GPRS/EDGE:850/1900MHz W-CDMA 850/1900MHz CTL-001E GPRS/EDGE: 850/900/1800/1900MHz W-CDMA 900/2100MHz settings Provider specified editing method PPP dialup registration number
(cid), APN, user name, password Packet calling IP calling service correspondence Enable / Disable can be set 8 3.2. Router function Items Remarks IPv4 Static DHCP client DHCP serverMAX 128 addresses can be distributed Dynamic NAT Static NAPT WAN port LAN address: Do the port conversion DNS cache serverForwarder LANWAN, WANLAN Each accept / drop mode can be specified. IP address + Portnumber:Up to 100 combinations can be set up. Object protocol TCP, UDP, ICMP. Can be detect and block DoS attacks WAN:PING response can be rejected WAN:DNS Query can be discarded DDNS server / ID / PW configurable Capable to maintain network connection when connecting to the Internet Start-stop conversion Listening for connection: WAN / LAN can be switched Provider settings IP address, port Option can be specified synchronous serial/IP WAN LAN Routing protocol Routing method DHCP NAT NAPT DNS server Packet filtering Access control DDNS setting PING setting RS-232C Protocol conversion function Security Conversion protocol TCP/IP server TCP/IP client 9 4. Operation maintenance function 4.1. Operation setting function Various operation settings of the device are set up via the setting Web page inside the device. This section shows each screen and various setting functions. 4.1.1. Operation guarantee browser Operation verified Web Browser:Internet Explorer 8 or later 4.1.2. Access to the device settings menu 1) Access from the LAN port URL for HTTP access http://192.168.11.1:8080 URL for HTTPS access https://192.168.11.1:8443 2) Remote access When using IP-VPN, "Remote operation setting" in the setting menu is enabled and access is possible from the browser of the remote PC where the IP address is registered. 3) Default user name / Password admin / admin 4) Login When accessing the setting menu of this device by the browser by the above, the following login input screen is displayed in the browser. Login input screen Enter the correct user name and password and click the "Login" button to display the system information screen shown in 6.2.1. 10 5. Setting menu screen specification 5.1. Common specification 1) On each screen, by selecting the menu item on the left side, it transits to the arbitrary setting menu screen. 2) Setting menu screen as common items, except for 6.2.1 System information screen, after setting on each screen, When "Save" button is clicked, "((Saved for screen but it is not valid)"
is displayed next to button or below. 3) After making settings on each setting screen and clicking the "Save" button, reset it by clicking the "Setting" button on the enable setting screen, the setting contents will be reflected after rebooting. 5.2. Main setting screen specification 5.2.1. System information screen When accessing this device, or by selecting the "System Information" menu, the system information of this device is displayed. 5.2.2. PPP setting Figure 16 PPP setting screen specification 5.2.3. IP Calling setting Setting screen when you use IP calling 11 5.2.4. LAN setting Figure 18 LAN setting screen specification 5.2.5. NAPT setting When not using the DHCP server function, NAPT setting is a required item because it is the address of LAN side / WAN side, port conversion. 5.2.6. DDNS setting When the DDNS client function is enabled on the DDNS setting menu, this device notifies the DDNS server of the IP address when it is connected 5.2.7. Packetfiltersetting You can set packet filtering individually for LAN WAN direction, WAN LAN direction. A packet containing the specified IP address,port,protocol (as data):accept / drop can be set. 5.2.8. PING setting It is a function to maintain communication by periodically sending pings to prevent network disconnection by the telecommunications carrier side when a certain period of idle state elapses when connecting to the Internet. It is a function to realize the so-called Keep alive. 5.2.9. RS232C setting This is the screen to set the communication specification of RS232C port. 12 5.2.10. PLC setting In the case of the local PLC mode (see "maintenance setting" for mode switching), this page is used. 5.2.11. PIN setting PIN authentication of SIM card:enable / disable setting,vailed PIN code setting. 5.2.12. Change ID / password This is a screen to set the user name and password to access WEBGUI. 5.2.13. Remote operation setting It is a setting screen of whether access to WEBGUI from the Internet is possible. 5.2.14. Other setting It is a function setting of security, time synchronization, and periodic reset. 5.2.15. Enable setting 5.2.16. Maintenance setting It is a maintenance function screen such as importing and exporting the setting file, exporting the log file, switching the operation mode, returning to the shipping setting. 13 5.2.17. Firmware update Capable to update firmware at this screen 5.2.18. Logout Select this when logging out from the setting menu of this device. If logout is done, you will return to the WEBGUI login screen. 14 6. Specification table The specifications of this device are shown in Figure 32 below. Figure 32 Body specification table Items Specification Product name WCDMA/GPRS Wireless Data Terminal Size (W x H x D, mm) 14323.593 (Protruding parts not included
) Weight Approximately 260g Antenna terminal SMA jack x 1 Power terminal input Molex 3Pin x 1, EIAJ-2 round x 1Back Side Interface LAN terminal RJ45 jack x 1, wit LED display RS-232C terminal D-SUB 9Pin male x 1 SIM slot Tray type x 1 USB terminal Micro USB-B jack x 1 DIP switch for setting 4 pole switch x 1 Display LED Reset button 7, (Green x 6, Red x 1) Abnormality monitoring By watchdog Power supply allowance input DC24V5%
Current consumption During communication MAX: 750mAAt 5V Standby MAX: 200mAAt 5V Environmental condition Operational guarantee Storage guarantee Temperature45 Humidity1090 Temperature-4080 Humidity595 Used communication module Made for SIMCOM SIM5320A/E use CPU ROM/RAM OS Freescale i.MX280 454MHz 128MB/64MB Linux 2.6.35.3 FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Radiation Exposure Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. 15 This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Hereby, Cathay Tri-Tech.,Inc, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.The full text of the EU declaration of conformity is available at the following internet address:
http://www.cathay.jp/support/oversea/eu-doc.html Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Warning: Operation of this equipment in a residential environment could cause radio interference. Contract us:
Cathay Tri-Tech.,Inc Add:Union bldg.7F,3-24-5,Shinyokohama Kohoku-ku,Yokohama 222-0033,Japan 16 Tel:+81-45-476-5170 Fax:+81-45-476-5171 URL:http://www.cathay.jp 17