Technologies, Inc. 8F, No. 150, Jian Yi Road, Chung Ho City, Taipei County, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 http://www.ccandc.com.tw E-mail: marketing@ccandc.com.tw Bluetooth Module BT-0002M-1 Users Guide Version 1.1 Technologies, Inc. BT-0002M-1 Bluetooth Module Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Confidential 2 Technologies, Inc. BT-0002M-1 Bluetooth Module This device is intended only for OEM integrators under the following conditions:
1) The transmitter module may not be co-located with any other transmitter or antenna. As long as condition above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The final end product must be labeled in a visible area with the following: Contains TX FCC ID: PANBT0002M1. Manual Information That Must be Included The users manual for OEM integrators must include the following information in a prominent location IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used not be co-located or operating in conjunction with any other antenna or transmitter. Confidential 3 Technologies, Inc. BT-0002M-1 Bluetooth Module Description CC&C Technologies, Inc. provides various Bluetooth products. They are suitable for customers to exploit them to implement Bluetooth functionality into various electronic devices. The features of Bluetooth module list as below:
Features Model Name Standard Frequency Band Spread Spectrum RF Output Power Antenna terminal DC power I/O Interface BT-0002M-1 Bluetooth v1.1 2.4~2.4835GHz unlicensed ISM band FHSS (Frequency Hopping Spread Spectrum) Class 2 (under 4 dBm) 50 Ohm 3.3V USB Compliant USB V1.1 UART Baud rate up to 921K PCM Yes PIO 12 PIO 15 x 23 mm Dimension Photos 1 BT-0002M-
Confidential 4 Technologies, Inc. BT-0002M-1 Bluetooth Module Unit V V V oc oc Unit V V V oc oc Unit V V V V V V V V V V V V Electrical Characteristics Model Name Supply Voltage Storage Temperature Max. Typ. Min Max. Min. Absolute Maximum Ratings BT-0002M-1 3.5V 3.3V 2.8V 85
-40 Recommend Operation Conditions BT-0002M-1 Model Name Supply Voltage Max. Typ. Min Operation Temperature Max. Min. 3.5V 3.3V 2.8V 70 0 Model Name Digital (UART, PIO) USB Input/Output Terminal Characteristics BT-0002M-1 VIL Max Min VIH Max Min VIL Max Min VIH Max Min VOL Max Min VOH Max Min
+0.8
-0.4 3.7 2.31 0.99
2.31 0.2 0 3.3 2.8 Confidential 5 Technologies, Inc. BT-0002M-1 Bluetooth Module Electrical Characteristics - Continue Current Consumption Model Name Mode -Active Mode -Idle ACL data transfer 115.2 Kbps UART (Master) ACL data transfer 720 Kbps USB (Master) ACL data transfer 720 Kbps USB (Slave) SCO connection HV3 (Master) SCO connection HV3 (Slave) SCO connection HV1 (Master) SCO connection HV1 (Slave) UART interface USB interface BT-0002M-1 30mA 75mA 75mA TBA TBA TBA TBA 2mA 6mA Unit mA mA mA mA mA mA mA mA mA Confidential 6 Technologies, Inc. Radio Characteristics -Transmission BT-0002M-1 Bluetooth Module Item Output Power Frequency Range 20 dB Bandwidth t u p t u O t i m s n a r T m u r t c e p S Adjacent Channel Power Modulation Characteristics 00001111 payload t s e T n o i t a u d o M l 01010101 payload Initial Carrier Frequency Tolerance Carrier Frequency Drift Frequency Drift Rate Transmission Measure 3dBm Bluetooth Spec. Note 2400.94 2481.06
>2400MHz
<2483.5MHz
<1MHz
<1MHz
<1MHz 800k 800k 800k
-25dBm -20dBm
-45dBm -40dBm Measuring the 30dBm point when use channel 0 and 79
. 167k 195k 1.04 6.24k 6.4k 2.66k
-17K
-13K
-15K
-0.2K
-0.2K
-0.3K 140 F1avg 175KHz 115KHz at least 99.9%
0.8 75KHz 75KHz 75KHz 25KHz 40KHz 40KHz KHz /us KHz /us KHz /us 2402 MHz 2441 MHz 2480 MHz
|M-N|=2
|M-N|3 F1max F1avg F2max F2avg F2avg /F1avg 2402 MHz 2441 MHz 2480 MHz 1 slot 3 slot 5 slot 1 slot 3 slot 5 slot Confidential 7 Technologies, Inc. BT-0002M-1 Bluetooth Module Radio Characteristics -Receiver Item Sensitivity - Single slot packets (DH1) Sensitivity - Multi-slot packets (DH3) Sensitivity - Multi-slot packets (DH5) C/I performance Receiver Measure Bluetooth Specification
-83 dBm -70dBm
-83 dBm -70dBm
-83 dBm -70dBm Note
1 0
. t e a R r o r r E t i B Co channel interference, C/Ico-channel Adjacent 1MHz interference, C/I1MHz Adjacent 2MHz interference, C/I2MHz Adjacent 3MHz interference, C/I3MHz Image frequency Interference, C/IImage Adjacent 1MHz interference to in-band mirror frequency, C/IImage1MHz 30MHz 2000MHz 2000 2400MHz 2500 3000MHz 3000MHz 12.75GHz Blocking performance Intermodulation Performance Maximum Input Level TBA TBA TBA TBA TBA TBA 11dB 0dB
-30dB
-40dB
-9dB
-20dB
-10dBm
-27dBm
-27dBm
-10dBm TBA TBA TBA TBA TBA TBA PASS -20dBm Interfering signal power level Interfering signal power level Interfering signal power level Interfering signal power level Confidential 8 Technologies, Inc. Pin Assignment and Mechanical Drawing BT-0002M-1 Bluetooth Module Confidential 9 Technologies, Inc. BT-0002M-1 Bluetooth Module CC&C Technologies, Inc. reserves the right to make technical changes to its product as part of its development. While every care has been take to ensure the accuracy of the contents of this document, CC&C can no accept responsibility for any errors. All data and specifications are subject to change without notice. All the trademarks of products and companies mentioned in this data sheet belong to their respective. Life Support Policy and Use in safety-Critical Application. These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected toresult in personal injury. Confidential 10