all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 1.40 MiB | June 05 2019 | |||
1 | External Photos | June 05 2019 | ||||||
1 | External Photos | June 05 2019 | ||||||
1 | Cover Letter(s) | June 05 2019 | ||||||
1 | ID Label/Location Info | June 05 2019 | ||||||
1 | Internal Photos | June 05 2019 | ||||||
1 | Test Report | June 05 2019 | ||||||
1 | Test Setup Photos | June 05 2019 |
1 | Users Manual | Users Manual | 1.40 MiB | June 05 2019 |
COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 1 - 28 Product specific instructions Contactless Only Reader COR Approved by EW:
Date:
Signature:
Approved by PM:
Date:
Signature:
Approved by QM:
Date:
Signature:
CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 2 - 28 Product specific instructions Table of contents 1 Purpose ......................................................................................................................... 3 2 Scope ............................................................................................................................ 3 3 Terms and Abbreviations ............................................................................................... 3 4 Responsibilties .............................................................................................................. 3 5 Characteristics ............................................................................................................... 4 5.1 FCC information...................................................................................................... 4 5.1.1 FCCID, Modelname .......................................................................................... 4 5.1.2 FCC Label Artwork/ Placement ......................................................................... 4 5.2 FCC NOTICE/ CONFIRMATION ............................................................................ 5 5.3 FCC Manual Requirements according 15.105 ........................................................ 6 5.3.1 Definitions ......................................................................................................... 6 5.3.2 Text for User Manual (blue cursive text) ............................................................ 6 5.4 Safety Information ................................................................................................... 8 5.5 Important information for use .................................................................................. 9 5.5.1 Important integrator co-operation obligations .................................................... 9 5.5.2 Cleaning Card Reader......................................................................................10 5.5.3 Warranty ..........................................................................................................10 5.6 Block diagram COR ...............................................................................................11 5.7 System description COR ........................................................................................11 5.8 System description OPP-C60/ OPM-C60 with COR ...............................................12 5.9 User Interface ........................................................................................................13 5.10 General technical information COR .......................................................................14 5.10.1 Contacless reader COR ...................................................................................14 5.10.2 IP information of COR versions ........................................................................15 5.10.3 Viewing angle of the COR display (COR-A20, COR-B20) ................................17 5.10.4 COR Interfaces ................................................................................................17 5.11 Certification ............................................................................................................18 6.1 6 Technical Data..............................................................................................................19 Images and Dimensions ........................................................................................19 6.1.1 Dimensions of COR-A10 / COR-A20 ................................................................19 6.1.2 Dimensions of COR-A12 ..................................................................................20 6.1.3 Dimensions of COR-B20 ..................................................................................21 6.1.4 COR mounting cut-out......................................................................................22 6.2 Interfaces ...............................................................................................................23 6.3 Technical Data .......................................................................................................25 6.3.1 COR .................................................................................................................25 7 MTBF statistics .............................................................................................................27 8 Changelog ....................................................................................................................28 CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 3 - 28 Product specific instructions 1 Purpose This specification gives an operational description of the COR. 2 Scope Customer, Integrators, Net Provider, (CCV-EW, SA, PM) 3 Terms and Abbreviations BMP COR DK Bitmap, pre-defined data field Contactless Only Reader Deutsche Kreditwirtschaft (formerly ZKA; http://www.die-deutsche-
kreditwirtschaft.de/) Outdoor Payment Module: This terminal is a multifunctional Terminal. It has no display or keyboard within the machine. Outdoor PIN-Pad is a secure multifunctional terminal for installation in machine for indoor and outdoor use. describes the contactless only reader combined with a chip reader describes the contactless only reader OPP-C60Standard with front cut-off 199*140mm (OPP-A40/B50) OPP-C60Compact with front cut-off 141*92mm OPP-C607000 with front cut-off 196*132mm Product Management Sales Secure-Card-Reader negative Wakeup signal (bidirectionally (input and output): Each connected MDB device can pull this line low to wakeup all other devices on the bus Electromagnetic compatibility OPM OPP COR-Bxx COR-Axx OPP-C60s OPP-C60c OPP-C60m PM SA SCR nWAKE EMC 4 Responsibilties The Product Management group (PM) is accountable for the maintenance of this specification. PM is also responsible to forward the included information (FCC NOTICE/ CONFIRMATION) to customers/ manufacturers who will install the OPP-C60/ OPM-C60 with COR and with optional SCR-C60 in their machines (vending machines, ticket machines, parking stations, petrol stations, ). CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 4 - 28 Product specific instructions 5 Characteristics 5.1 FCC information 5.1.1 FCCID, Modelname 2APBE-72001 FCC ID:
Modelname: OPx-C60 5.1.2 FCC Label Artwork/ Placement The FCC information (FCC ID and Modelname) is included at label with serial number at backside of OPP-C60/ OPM-C60 at position below the interface:
CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 5 - 28 Product specific instructions 5.2 FCC NOTICE/ CONFIRMATION The transmitter (OPP-C60/ OPM-C60 with COR and with optional SCR-C60) will be supplied as an original equipment device to the manufacturer of the payment terminal/ of the vending machine/ ticketing machine. According to the labelling requirements in 47 CFR Part 15 the terminal manufacturer/
manufacturer of vending machine/ ticketing machine has to add following text to the appropriate users manual for the terminal/ for the machine:
NOTICE:
This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications made to this equipment not expressly approved by CCV Deutschland GmbH may void the FCC authorization to operate this equipment. Radiofrequency radiation exposure Information:
The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized. CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 6 - 28 Product specific instructions 5.3 FCC Manual Requirements according 15.105 5.3.1 Definitions Digital device. (Previously defined as a computing device): An unintentional radiator
(device or system) that generates and uses timing signals or pulses at a rate in excess of 9,000 pulses (cycles) per second and uses digital techniques; inclusive of telephone equipment that uses digital techniques or any device or system that generates and uses radio frequency energy for the purpose of performing data processing functions, such as electronic computations, operations, transformations, recording, filing, sorting, storage, retrieval, or transfer. A radio frequency device that is specifically subject to an emanation requirement in any other FCC Rule Part or an intentional radiator subject to Subpart C of this Part that contains a digital device is not subject to the standards for digital devices, Class A digital device: A digital device that is marketed for use in a commercial, industrial or business environment, exclusive of a device which is marketed for use by the general public or is intended to be used in the home. Class B digital device: A digital device that is marketed for use in a residential environment notwithstanding use in commercial, business and industrial environments. Examples of such devices include, but are not limited to, personal computers, calculators, and similar electronic devices that are marketed for use by the general public. Note: The responsible party may also qualify a device intended to be marketed in a commercial, business or industrial environment as a Class B device, and in fact is encouraged to do so, provided the device complies with the technical specifications for a Class B digital device. In the event that a particular type of device has been found to repeatedly cause harmful interference to radio communications, the Commission may classify such a digital device as a Class B digital device, regardless of its intended use. 5.3.2 Text for User Manual (blue cursive text) For a Class A digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 7 - 28 Product specific instructions protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 8 - 28 Product specific instructions 5.4 Safety Information The system handbook should be studied before integrating the product into vending machines, as this contains important information regarding installation. Damage resulting from not following the guidelines or from incorrect operation will void the guarantee. No liability will be accepted for any consequential damage. No liability will be accepted for damage or injury resulting from incorrect operation or from failure to observe the safety guidelines. Integration of the product may only be carried out of qualified by electrical specialists
(i.e. electrician), according to the relevant regulations (i.e. VDE, CE). If you have no specialist knowledge regarding the installation, do not carry this out yourself. Installation should only be carried out by a qualified specialist. Never remove the power supply or the card-reader from terminal, whilst this is performing a payment or other active functions (i.e. display indication please wait...). Please contact your network provider if such a message appears for a longer period. Change the card-reader only if the power supply is disconnected. The terminal is certified for cashless payments in various countries, dependent on the network provider / acquirer. Operation outside of Germany is to be agreed in consultation with the relevant trade partner. Never try to open the terminal. Unauthorized opening leads to deletion of all secure data, activating the fraud function and setting the terminal out of order. This also voids the warranty. Never submerge the terminal in water, throw into fire or expose to high humidity. The device should be cleaned with a soft damp cloth. Do not use chemical cleaners. Repairs may only be performed by authorized agents of CCV. Do not expose the device to temperatures outside the approved limits. Keep sufficient distance to mobile phones and wireless devices because these may cause interference. This is not necessary for devices that are able to perform a contactless transaction (e.g. mobile with NFC interface). Please obtain regular information about available and/or necessary updates or product extensions (Hotline of your network operator). Following software updates, telephone installation changes, or other changes to the terminal the complete payment operation including closing should be tested. Damage to or removal of the identification labels and seals on the equipment will void your warranty. One mounting screw of the terminal must be connected with the grounding of the local electrical system. The grounding must not be connected to a floating ground or a phase (see chapter Installation Instructions. CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 9 - 28 Product specific instructions 5.5 Important information for use 5.5.1 Important integrator co-operation obligations The installation instructions as described in the system manual must be followed, particularly in view of mechanical, electrical and operational guidelines (ESD-
electrical grounding). Important! Please ensure that the terminal is connected, configured and tested so as to execute updates via remote maintenance server TKS. Please also ensure possibility that updates can be initiated via the vending machine interface or the network-provider. In installation lacking a network connection where remote maintenance is not possible, it must be ensured that the integrator carries out on-site updates using Terminal Supervisor 3 or USB and that additional costs will occur. It must be ensured that software tools (Terminal Supervisor 3, Updatempp, etc.) are regularly updated. The current versions are available from the CCV download server.
(https://download.ccv-deutschland.de) CCV points out that regular operational and security relevant updates could be required. Not carrying out these updates can lead to loss of approval and/or malfunction. CCV notifies of necessary updates in an appropriate time of period via release-notes. The provision of updates during the guarantee period is free. CCV is not liable for malfunctions or damage caused by lack of maintenance updates or maintenance errors due to the customer. CCV supports you during the initial installation of the product into vending- or other machine, and recommends a joint check of your vending-machine/terminal integration on-site prior to piloting, so that typical problems can be eliminated in advance. Please contact you reseller or CCV directly for details of this. Following expiry of the warranty period it is possible to purchase software-updates or a part of a previously contracted software maintenance contract. Necessary updates are documented in the release-notes. Software-updates are generally only available for a fee. Further details are available in consultation with your sales partner. CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 10 - 28 Product specific instructions 5.5.2 Cleaning Card Reader Clean the reader regularly with a cleaning card to prevent read errors. The cleaning intervals depend on the frequency of use and on the ambient conditions. Please do not use chemical cleaners. For cleaning the front of the card reader please use a slightly damp cloth or antistatic cloth. The following intervals should serve as a guideline:
- Indoor device: 1 * weekly
- Outdoor device: 1 * daily 5.5.3 Warranty Caution: Do not try to repair or to open the terminals card reader. Opening the device will void the warranty. The device will be no longer functional and must be replaced. In case of damage, please contact your service provider. CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 11 - 28 Product specific instructions 5.6 Block diagram COR 5.7 System description COR The COR is a contactless ISO 14443 A/B card reader for payment applications with an optional ISO7816 card reader (ICCR only at version COR-B20). The user feedback interface consists of a buzzer, LEDs in different colors and an optional monochrome graphical LCD (display only for versions COR-A20, COR-B20; no display for versions COR-A10, COR-A12). The ports to the host system containing a RS-232 interface, an USB interface and a power Connection (RS232, USB, power in connected on the power-pcb/ = connector-pcb). The battery is only used as a backup energy source for the tamper detection circuit as long as the main power is not available. CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 12 - 28 Product specific instructions The controller with internal flash and RAM (Cortex STM32) and the RFID-frontend controller are assembled on the main-pcb with a pcb-encapsulation around these controllers
(encapsulation protects secure signals according to PCI specification). The antenna-pcb is directly soldered to the main-pcb (short connection from RFID-frontend of main-pcb to antenna-PCB without any additonal connector). Any vending is started by users by any action on vending machine/ ticket machine. The vending machine/ ticket machine starts payment by communication to OPP-C60/ OPM-
C60. The payment application on OPP-C60/ OPM-C60 can use the COR reader to manage contactless payments by contactless ISO 144443 A/B interface between COR antenna and contactless card (or NFC-application on smartphone) of the user who wants to pay for the vending process. 5.8 System description OPP-C60/ OPM-C60 with COR The COR (Contactless Only Rader) is connected by RS232 or USB to a OPP-C60 or OPM-
C60. The OPP-C60 and OPM-C60 use the COR (Reader) for reading cards for payment applications running in the OPP-C60/ OPM-C60. The multifunctional OPP-C60 and OPM-C60 are as an evolution of the OPP-B50 tailor-made payment system for vending machines, tank machines, service machines and kiosk, where it is used as a compact and fully functional terminal. A more compact design is available as the OPP-C60 Compact, which requires a smaller installation footprint with the same functionality. The multifunctional OPP-C60 consists of a separated card reader and a highly integrated PIN-Pad as the main device of the Systems. Next to the built-in LAN port, diverse communications can be realized via USB connections such as ISDN or GPRS. For this purpose the device does not even to be removed. Otherwise, no more additional components are required in the machine (besides the card reader and receipt printer) the cost of integration in an automatic system is reduced to a minimum. The elegant OPP-C60 with is front in vertically brushed stainless steel, a high resolution graphical LCD display and one for the purpose optimally tuned keyboard is based on a forward-looking hardware platform, the highest quality standards sufficient and due to their design offers a high level of security. It is vandal-resistant, weather resistant and can be used in an extended temperature range. The OPP-C60 is beside the Indoor use ideal for Outdoor use. The OPP-C60 Standard requires the same mounting cutout and the same mounting points as the OPP-A40 und OPP-B50. Therefore, it can be used by integrators easily. The terminals are conforming to the requirements of ZKA TA7.1 trader terminals. As a pioneering hardware platform with extensive storage facilities it offers not only a variety of uses, but can also be updated at any time by a Software-Download to add new software features and functionality The intelligent software update concept offers maximum reliability. To the very best service concepts (exp. Terminal supervisor and terminal management system TKS) were adopted at this point. Thus, it offers maximum investment security. CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 13 - 28 Product specific instructions 5.9 User Interface The COR is connected by RS232 or USB with the OPP-C60 or OPM-C60 (Users can only use interfaces to OPP or OPM; users do not have any direct control to COR). The user of the OPP-C60 can get along easily with the terminals. The easy to use interface and the textual information on the big graphic display will help with it. The OPM-C60 can be comfortably administrated with the TS3 that can be downloaded for free. The terminals can be used as unattended terminal (e.g. vending machine or petrol vending machine) and as attended terminal preferably in rough environments (extended temperature range, splash and vandalism). CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 14 - 28 Product specific instructions 5.10 General technical information COR 5.10.1 Contacless reader COR COR contactless readers can be used with the OPP-C60 and the OPM-C60. A certification is available for the combination OPP-C60 + COR-A10/12/20 and OPM-C60 + COR-A10/12/20 /
COR-B20. The OPP-C60 must not be used with COR-B20! The OPM-C60 does not require a 4-eye-activation. COR-A10/12 COR-A20 COR B20
(contactless only)
(as A10 plus Display)
(as A20 plus chip reader) A cable with an infused ferrite can be found in the scope of supply. The following figure is showing the cable from OPP-C60 / OPM-C60 to the COR reader (the ferrite is infused in the cable part to the COR). a) Description SN Designation Name & Type 1 2 Connector Cabel U.S. PLUG 8P8C, Molded Pantone orange 165, Gold Plated 3U PU Jacket, 28AWG PP*4C, Black Shiny Qty 1 1 CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 15 - 28 Product specific instructions 3 Connector U.S. PLUG 8P8C, Molded Pantone Yellow 107, Gold Plated 3U 1 b) Wire List P1 1 2 3 4 7 8 Color White Black Red Green Blue Blue PIN OUT DETAILS P2 V_IN-OUT GND
<= RS232
=> RS232 Wake UP GND_IN-OUT 1 2 3 4 7 8 Note: All cables have to pass electrical test. 5.10.2 IP information of COR versions The COR provides the following IP protection classes.
- COR-A10, -A12, -A20 front panel IP65 o o back panel IP20
- COR-B20 o back panel IP20 front panel IP32 o 3 = foreign object size > 2.5mm diameter cannot entry 2 = water drops with 15 angle have no effects of damage Further information on IP level of COR-B20 Water can entry to the backside of the COR reader (inside the vending machine) over the card slot. The contacting unit of the COR is opened at the bottom side to let foreign objects fall out or to let invaded water flow out (this is needed to prevent a blockade of the contacting unit). There should be mounted a drain sheet inside the vending machine under the COR-B20 to shield the electronics under the COR-B20. The openings at the backside of the COR housing for connector plugs or flexible connectors are mounted above the contacting unit. So there is no possibility for water drops to entry in this area to the COR electronics over the card slot. Only spray water or hose water could entry over some corners. Depending on the location where the COR is used we recommend to provide a protection board to prevent the device from soiling or spray water. CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 16 - 28 Product specific instructions CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 17 - 28 Product specific instructions Information for the contacting unit of the COR-B20
- The contacting unit for the chip card is produced for 10 years in a large quantity. It is sophisticated very solid and is also used for outdoor applications.
- All materials of the contacting unit are water resistant (i.e. synthetics, high-grade steel, gold-plated contacts for contacting the chip and gold-plated contacts at the limit switch).
- There can only be problems with frozen contacts. If the card is put in more times the ice on the contacts will detach. For preventing the contacts of freezing we recommend to use a heating inside of the vending machine. 5.10.3 Viewing angle of the COR display (COR-A20, COR-B20) Respecting the tolerances of the hardware components and the mounting tolerances the following max. viewing angle for the COR can be given.
- max. viewing angle from top / bottom about 17 to the display normal
- max. viewing angle from left / right about 50 to the display normal 5.10.4 COR Interfaces a) RS-232 Host Interface High speed RS232 (default 115.2 kbps, switchable to 230.4, 460.8 or 921.6 kbps);
RJ45; 8 pin shielded) without hardware handshake. The RJ45 Connector is located at the bottom side of the COR and the maximum cable length is 100cm. Pin 1 2 3 4 5 6 7 8 Signal Vin (power supply) GND TxD (output) RxD (input) Not connected Not connected nWAKE (input/output) Power GND b) USB host interface USB 2.0 compatible, 12 MBps, USB function (slave) connector type: 5-pin Mini-B-Connector Power supply via RJ45 connector (VBUS not used for supply) CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 18 - 28 Product specific instructions Automatic wakeup, if VBUS is present c) Interface selection If VBUS is active (5V): USB interface is selected VBUS is inactive (0V): RS232 interface is selected Only one interface is active at a time 5.11 Certification ZKA TA7.1 DC-POS 2.5 (also used with DC-POS 2.4) EMV2000 (EMV 4.0) Level 1 und Level 2 PCI version 3.x and 5.x CE: Directive 2014/53/EU WEEE: Directive of the European Parliament and of the Council to reduce the electrical drop (WEEE 2002/96/EG) RoHS: Directive of the European Parliament and of the Council on the restriction of use of certain dangerous substances in electrical and electronic equipment (RoHS 2002/95/EG) FCC CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 19 - 28 Product specific instructions 6 Technical Data 6.1 Images and Dimensions 6.1.1 Dimensions of COR-A10 / COR-A20 a) Front-view
(COR-A10 / COR-A20) b) Side-view
(COR-A10 / COR-A20) c) Rear-view of rear housing
(COR-A10 / COR-A20) d) Top-view
(COR-A10 / COR-A20) CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 20 - 28 Product specific instructions 6.1.2 Dimensions of COR-A12 a) Front-view b) Side-view c) Rear-view of rear housing d) Top-view CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 21 - 28 Product specific instructions 6.1.3 Dimensions of COR-B20 a) Front-view b) Side-view CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 22 - 28 Product specific instructions c) Rear-view of rear housing d) Top-view 6.1.4 COR mounting cut-out Integration information COR:
attachment with 4 mounting nuts:
0,8Nm +/-0,2Nm CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 23 - 28 Product specific instructions 6.2 Interfaces Connection: OPM-C60 with COR-x COR-x USB Host USB OTG Power SCR-C
(optional) POS MDB LAN CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 24 - 28 Product specific instructions Connection: OPP-C60 with SCR-C60 and COR-Axx COR-x USB Host USB OTG Power SCR-C POS MDB LAN CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 25 - 28 Product specific instructions Note The interfaces described below are not short-circuit proof!
6.3 Technical Data 6.3.1 COR Temperature and environment
(Operating, storage) Temperature conditions:
operating: -25C to +70C (w/o heating) storage: -30C to +80C For long-time storage: +10C to +30C Heating: If heating is needed, the vending/ticket machine has to provide the power supply for it. Humidity conditions:
Power consumption operating:
5% - 90% RH (non-condensing) storage:
20% - 70% RH (non-condensing) Electronic devices are coated (w/o connectors)
- Active mode with no card (Irms current) 55mA@12VDC, 26C
- Active mode with card communication 200mA@12VDC, 26C
- Vin = 9 25V DC (via host connector), max. ripple 0.3 V
- COR max. 500mA @ 12V
(Current peaks at contactless communication!) Vibration & Shock Vibration Test (DIN EN 60068-2-6; IEC 68-2-6):
2Hz bis 9Hz/ 9Hz bis 200Hz; 10m/s; 20 cycle in each direction (x, y, z); no damage Power Management Shock Test (DIN EN 60068-2-27; IEC 68-2-27):
18 Shock with 11ms pulse duration; max. acceleration 100m/s, (6 Shock in both directions); no damage Low power design with wakeup:
- Wakeup by token presentation (capacitive proximity switch)
- Wakeup by insertion of contacted card (COR-B20 only)
- Wakeup by host (e.g. OPP, SCR, OPM): Bi-directionally wakeup line nWAKE via RS232 host connector: MDB compatible, COR output is a bipolar transistor with open collector (< 1V @ 10mA). COR input is active low (< 1V @ -1mA). External pull-up, e.g. 100kOhm to vending CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 26 - 28 Product specific instructions machine supply voltage (945V), so nWAKE must withstand 45V.
- Wakeup by USB interface (VBUS) Power-up time < 0.3s (measured from wakeup to 1st host command) Min. Time BF Min. 50.000h Power Supply Certificates Vin = 9 25 V DC (via host connector), max. ripple 0.3 V EMVCo L1 contactless type approval EMVCo L1 contact type approval (COR-B20 only) PayPass, payWave compatible VISA contactless reader implementation notes CE approval (compliant to R&TTE directive) RoHS compliant WEEE compliant CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 27 - 28 Product specific instructions 7 MTBF statistics Product COR-A10 MTBF values ca. 500.000h CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement. COR FCC Information/ Operational Description FCC ID: 2APBE-720001 OPx-C60 PA73P005_en Edition: 01 Page 28 - 28 Product specific instructions 8 Changelog Edition overview for this document:
Edition:
Date:
Issue-, change reason Creator release:
01 02 03 04 10.07.2018 Initial Release M. Fischer CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-05-06 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-05-06
|
||||
1 | Applicant's complete, legal business name |
CCV Deutschland GmbH
|
||||
1 | FCC Registration Number (FRN) |
0027364611
|
||||
1 | Physical Address |
Gewerbering 1
|
||||
1 |
Au i. d. Hallertau, N/A 84072
|
|||||
1 |
Germany
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@ctcadvanced.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2APBE
|
||||
1 | Equipment Product Code |
720001
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M******** F******
|
||||
1 | Telephone Number |
+49 (********
|
||||
1 | Fax Number |
+49 (********
|
||||
1 |
m******@de.ccv.eu
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RFID Reader | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
CTC advanced GmbH (former CETECOM ICT Services )
|
||||
1 | Name |
G******** S******
|
||||
1 | Telephone Number |
49-68********
|
||||
1 | Fax Number |
49-68********
|
||||
1 |
t******@ctcadvanced.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC