Magnetic Wireless Charger
User Manual
CONETNES
1.0 INTRODUCTION ---------------------------------------------------- 1
2.0 FEATURES ---------------------------------------------------------- 1
3.0 SPECIFICATIONS -------------------------------------------------- 1
4.0 PACKAGE CONTENTS ---------------------------------------------- 2
5.0 OPERATION --------------------------------------------------------- 2
6.0 CONNECTION DIAGRAM ------------------------------------------- 3
Wireless Charger
Magnetic Wireless Charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or using this product. Please keep this manual for future
reference.
1.0 INTRODUCTION
This product is a high-performance wireless charger. This product is
suitable for mobile phones, and other productions based on wireless
charging 5W /7.5W /10W/. Connect the wireless to a power charger,
and then you can charge your device supported wireless charging
(mobile phones, etc) by put it on the charger directly .It is helpful in
long time journey and convenient for business!
2.0 FEATURES
Transmitting terminal input: 5V3A 9V2A
Transmitting terminal output: 5W/7.5W/10W
Compliant with CE, FCC, standards
It is light, smart and convenient to use
3.0 SPECIFICATIONS
5V3A 9V2A
5W 7.5W 10W
110kHz-205kHz
Input
Wireless charging output
Switch Frequency
Operating Temperature Range 0~40°C
Storage Temperature Range
Operation Humidity
Storage Humidity
Size
-20 ~ 70°C
10% ~ 80% RH
5% ~ 95% RH
Weight
100(L)* 100(W)*17.9mm±0.2
155g±10
1
Wireless Charger
4.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
Main unit×1
User Manual×1
5.0 OPERATION
Operation Procedures
1. Connect the wireless charger with a powered adapter,
Operation Notes
1. For optimum performance, please use the wireless charger
2. Please connect the wireless charger to a power adapter which
according to this user manual.
output should be 5V3A or 9V2A
3. Please unplug the wireless charger after using.
4. Do not use the wireless charger with an electronic product which is
not in conformity with the specifications, so as to avoid any
problem caused by specification mismatching.
5. It’s normal that wireless charger will be a little overheated in the
use process.
6. When the wireless charger stops working under some accidents
occurs, you need to check whether the device is compatible with
this charger.
7. Do not let the wireless charger close to fire, such as stove, candles
8. Do not let the wireless charger soak into liquid, such as swimming
and etc.
pool, bathtub, etc.
9. Do not wash the wireless charger with corrosive cleaner.
10. If the wireless charger cannot work properly, please contact the
store or distributor in your area.
11. This device complies with Part 15 of the FCC Rules
12. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received
13. Including interference that may cause undesired operation
14. FCC ID : A4X-WPC10-1CCNA
2
Wireless Charger
6.0 CONNECTION DIAGRAM
The Angle operation
Mobile phone put the picture
3
Wireless Charger
4
Wireless Charger
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator and any part of your
body.
FCC Warning
This device complies with Part 18 and part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.
NOTE : This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
P/N
5