FCC ID: A4X-IPC-14BU Solar Battery Camera

Content In the Box Product Overview Basic Parameters Set Up Your Camera Mount Your Camera Notice Customer Service 1 02 04 06 07 11 16 17 In the Box After opening the box, please check the following picture to see if the accessories are complete. Introduction 1. Green Energy:

Camera Mounting Bracket Mounting Screw Pack 3. Light Up the Night:

The IP camera will keep working permanently with an integrated solar panel if it has gotten 4 hours sunshine each day. 2. Long Working Time:

The camera can work around 6 months without any sunshine if triggered 20 times per day (10 times in the day and 10 times in the night). Quick Start Guide USB Cable

(Optional) USB Adapter

(Optional) The camera can turn the night into day with the built-in IR LEDs and Spotlights. The night visibility ranges up to 8m. 4. The key is in the detail:

Capture each detail of the event occurs around your home by a 2.5K ultra HD Resolution. 5. Storage:

Support local TF card (Max 128G) storage or cloud storage. 2 3 Product Overview Status LED 10 9 11 1 2 3 4 7 8 12 5 6 1 Solar Panel 5 Floodlights 9 Reset Button 2 Camera Lens 6 PIR 10 Charging Port 3 Status LED 4 Photosensitive Sensor 7 8 Microphone 11 TF Card Slot Power Button 12 Speaker LED Status Description Slow blinking Red Ready to connect Fast blinking Red Disconnected from the internet Slow blinking Blue Connected to the router successfully Solid Blue The camera has been added successfully and working normally Flashing blue and red alternately A firmware update is in progress 4 5 Basic Parameters Effective Pixels 2560*1440 Storage Resolution 2.5K Wi-Fi FOV(H/V/D) 100/52/122 Network Security TF Card

(Max 128G) Only 2.4GHz Wi-Fi WPA-PSK

/WPA2-PSK Lens IR LED Floodlights Audio PIR 3.5mm@F2.0 Operating Temp

-20C~+50C 8m 8m Battery Capacity 10400mAh Item Weight 436g Built-in Mic /

Speaker Product Dimensions 8m (100) Charging Power 129(L)*84(W)*

42(H) mm Type-C, DC5V/1A Weather Proof IP66 Mounting Type Wall Mount Solar Panel Max. 1.2W Set Up Your Camera Step 1 Download Download the Tuya Smart or Smart Life App from the Apple AppStore or Google Play, or by scanning the QR code below. Step 2 Connect it to the APP 1. Sign up an App account, go to the app homepage, tap Add Device, and select the smart camera(Wi-Fi). 6 7 2. Press and hold the power button for 3s until the Status LED is Slow blinking Red or Heard "Waiting to receive the wireless configuration"

Reset the device If the SSID of your home Wi-Fi have been changed, you need to reconfigure the network. Please hold the reset button for 5-6 seconds until you heard "reset successfully", then take the prompts to add the device again. Hold for 3s Hold for 5s Please follow the prompts of the App to allow relevant permissions, otherwise it will affect the addition and use of the device. Please choose a 2.4GHz Wi-Fi, the camera does not support the 5GHz Wi-Fi. 8 9 3. Please click Next, select a stable network and enter a password. The camera of the device scans the QR code generated by the mobile phone, keeps a distance of 15 to 20cm and does not move until the sound of Di is heard, and finally follows the steps on the App to complete the addition. When adding devices, please make the camera and mobile phone connect to a same Wi-Fi router. 10 Mount Your Camera Select a location The camera can be mounted on a wall. Select a location where you can get the desired view and make sure the solar panel is fully exposed to direct sunlight. Make sure to pick a place within range of your home network. Please try streaming video before you mount your camera. We recommend hanging it 2.5m (8.2 ft) above the ground and maintaining an angle of about 25 degrees from the horizontal ground. Camera field of view 25 25 Motion Detection Zone 2.5m

(8.2ft) 11 Mount the camera Wall Wall Wall Wall Wall Step 1 Step 2 Step 3 Step 4 Turn the knob of the mounting bracket counterclockwise to loosen and disassemble it. Align the mounting plate and mark the three circles where the holes need to be drilled. Drill three holes above the three marked circles. Insert three anchors into the holes and use the screws to affix the bracket over the anchors. 12 13 How to remove the camera Hold the main body of the camera, then rotate anticlockwise to remove the camera from the mounting bracket. Step 5 Step 6 Rotate the knob of the mounting bracket clockwise to secure it to the base of the mounting bracket. Align the hole at the bottom of the camera with the mounting bracket, and turn the camera clockwise to fix the camera to the mounting bracket.Rotate the camera to adjust the view and check it using the live stream which you can access in the App. 14 15 Notice CAUTION FCC Radiation Exposure Statement:

Risk of fire or explosion if the battery is replaced by an incorrect type. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This Avoid replacement of a battery with an incorrect type that can defeat a safeguard. equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. cutting off a battery, that can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; Do not leave a battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Customer Service Warranty 12-month Limited Warranty 16 17

Reference No.: WTX23X08179905W001 Page 1 of 15 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: A4X-IPC-14BU Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: A4X-IPC-14BU To Whom It May Concern:

CE LINK LIMITED certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory

[Changhong Chen, Engineer]

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: A4X-IPC-14BU To Whom It May Concern:

CE LINK LIMITED certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Signatory

[Changhong Chen, Engineer]

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: A4X-IPC-14BU Applicant FRN: 0021335963 US Agent Attestation Statement / Part 2.911(d)(7) CE LINK LIMITED certifies that, as of 2023-11-08, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: A4X-IPC-14BU. CE LINK LIMITED, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of CE LINK LIMITED for FCC ID: A4X-IPC-14BU. Designated Agent Information:

Company Name: FCC US Agent, LLC U.S. Agent FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: CE LINK LIMITED Designated Agent: FCC US Agent, LLC Company Representative: Changhong Chen Designated Agent Representative: Tim Payne Signature:

Signature:

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-08 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: A4X-IPC-14BU Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram Operational Description Schematics Parts List Tune-Up Information Security Information Software Defined Radio (SDR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Internal Photos Test Setup Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory

[Changhong Chen, Engineer]

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-08 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: A4X-IPC-14BU Model Declaration Letter Dear Regulatory Authority, Model(s): IPC-14BU-ZE, IPC-14BH-ZT, IPC-14BH-ZE are same to the model IPC-14BU-ZT, these models are same PCB Layout, Schematics, BOM. Only for different model name and appearances for different market require. Sincerely, Signatory

[Changhong Chen, Engineer]

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-08 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: A4X-IPC-14BU POWER OF ATTORNEY To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, CE LINK LIMITED are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory

[Changhong Chen, Engineer]

CE LINK LIMITED 22 Dongkang Road, Dalingshan Town, Dongguan City, Guangdong Province, China Date: 2023-11-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: A4X-IPC-14BU To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, Sincerely, Signatory

[Changhong Chen, Engineer]