all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 375.46 KiB | April 06 2001 | |||
1 | Attestation Statements | April 06 2001 | ||||||
1 | Cover Letter(s) | April 06 2001 | ||||||
1 | External Photos | April 06 2001 | ||||||
1 | ID Label/Location Info | April 06 2001 | ||||||
1 | Internal Photos | April 06 2001 | ||||||
1 | RF Exposure Info | April 06 2001 | ||||||
1 | RF Exposure Info | April 06 2001 | ||||||
1 | RF Exposure Info | April 06 2001 | ||||||
1 | Test Report | April 06 2001 | ||||||
1 | Test Report | April 06 2001 | ||||||
1 | Test Setup Photos | April 06 2001 |
1 | Users Manual | Users Manual | 375.46 KiB | April 06 2001 |
Important Notice Cell Data LTD. makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Further Cell Data reserves the right to revise this documentation and to make changes in the contents hereof without obligation of Cell Data to notify any person of such revision changes. Copyright Cell Data LTD. 2001 All Rights Reserved GlobeWave wireless modem is a trademark of Cell Data LTD, Windows is a trade mark of Microsoft Corporation, TX-CEL is a trademark of Celeritas, AT is a trademark of Hays Microcomputer Products, EarSet is a trademark of Jabra and all other trade marks are owned by their respective companies. FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Operating Requirements This device was tested in a notebook computer with the significant source of emissions (antenna) kept 2.0 cm. from the body. Please maintain a minimum of 2.0 cm separation distance between the users body and the device to comply with FCC RF exposure requirements. For more information about RF exposure, please visit the FCC website at www.fcc.gov Table of Contents Introducing the CDMA wireless modem ....................................2 PRODUCT FEATURE SUMMARY:...................................................................... 3 Important Safety Information.........................................................4 Getting Started - Setting Up the CDMA wireless modem PC Card................................................................................................5 Requirements: ............................................................................................ 5 What is in the package:.............................................................................. 5 Optional :................................................................................................... 5 INSTALLING THE CDMA WIRELESS MODEM HARDWARE AND DRIVERS...... 6 Installing the CDMA wireless modem Windows 98/ME Drivers............ 6 Installing Your CDMA wireless modem Windows NT Drivers............... 8 LOADING THE CDMA WIRELESS MODEM USER SOFTWARE: ..................... 14 Using Windows 98/ME and Windows NT:............................................... 14 RUNNING AND USING DIALER....................................................................... 19 Task Bar Icons ......................................................................................... 21 Using the Dialer ...........................................................................22 MAKING A CALL ........................................................................................... 22 ANSWERING AN INCOMING CALL.................................................................. 22 SETTING THE COMMUNICATION OPTIONS...................................................... 22 SETTING THE DIALER OPTIONS ..................................................................... 24 SETTING THE AUDIO OPTIONS....................................................................... 25 Important Operational Information..............................................26 AUTO-MODE SWITCHING CAPABILITY: ......................................................... 26 CELLULAR RECEPTION:................................................................................. 27 Cellular Data Connections with Dial-Up Networking..........28 SETTING UP DIAL-UP NETWORKING FOR CELLULAR DATA CONNECTIONS:.. 29 Sending Faxes with Your CDMA wireless modem ..................30 Sending a Cellular Fax Using your CDMA wireless modem :.............. 30 Cellular Voice Calls:....................................................................31 MAKING A VOICE CALL................................................................................. 31 USING AT COMMANDS TO DIAL ................................................................... 31 b Limited One-Year Warranty ........................................................32 APPENDIX A: FDA Consumer Update......................................33 c Introducing the CDMA wireless modem A fully integrated solution from GlobeWave The CDMA wireless modem PC Card is a unique, state-of-the-art, fully integrated, single Type II PC Card module for sending and receiving data, fax and voice communications over the Code Division multiple Access (CDMA) and Advanced Mobile Phone System (AMPS) cellular networks as well as over conventional land-based phone network. The cellular phone and fax/modem are optimally matched and integrated into a single PC Card, which means there is no need to connect the CDMA wireless modem to any external device, it is a cellular phone. The result is an elimination of the compatibility problems, which usually arise with cable, connected cellular phone-to-modem combinations. Your CDMA wireless modem is enabled to perform both cellular and land-
based voice, data and fax communications using standard communication software packages. Mode selection is fully automatic. This manual contains important information about setting up, using, and caring for your CDMA wireless modem . It assumes that you are familiar with the computer (hardware and software) which will be used. Before using the product, you should read this manual carefully as it provides important information and setup tips. 2 Product Feature Summary:
CDMA cellular phone system Analog AMPS cellular phone system (CSCD) Automatic mode switching between CDMA and AMPS (with definable preference) Data transfer rate 14400 bps [up to 64 Kbps (MDR) if supported by network]
over cellular CDMA system Modem transfer rate up to 21600 bps over AMPS cellular system (V.34) Implements TX-CEL technology for improved cellular data transfer performance over AMPS system Modem transfer rate up to 56 Kbps over land-line (V.90) Carrier A or B capability (Extended range, 832 channels) Mobile Station Power Class III (0.6W transmit power) PCMCIA type II form factor (with 35 mm length extension) Error correction (LAP-M, MNP 2-4, MNP10) and data compression
(V.42bis, MNP5) Modem FAX transfer rate up to 14400 Baud FAX protocol for CDMA cellular networks Landline (PSTN) capability Earphone for cellular voice communication Automatic operation mode switching by selecting connected accessories Extended Industry Standard AT command set compatible with most common application software 3 Important Safety Information Traffic Safety Do not use your computer and your CDMA wireless modem while driving a vehicle. Remember road safety always comes first!
Operating Environment Your cellular modem includes a cellular phone. Remember to follow any special regulations in force in any area and always switch off the modem whenever it is forbidden to use a cellular telephone, or when it may cause interference or danger. Operation of any radio transmitting equipment, including your cellular modem, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device if you have any questions. Other electronic equipment may also be subject to interference. Users are advised to switch off the cellular modem when at a refueling point
(service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations are in progress. Switch off your cellular modem when in an aircraft. The use of cellular modem, as any cellular phone, may be dangerous to the operation of the aircraft, disrupt the cellular network, and is illegal. For additional information regarding FDA consumer update of mobile phones please refer to appendix A. FCC/INDUSTRY CANADA NOTICE Your cellular modem may cause TV or Radio interference. The FCC/Industry Canada can require you to stop using it if such interference cannot be eliminated. This device complies with part 15 and 68 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference. 4 Getting Started - Setting Up the CDMA wireless modem PC Card Your CDMA wireless modem is designed to be used with any laptop, notebook or hand-held computer equipped with a type II PC Card slot. Requirements:
PCMCIA type II slot conforming to PCMCIAs Standard Version 2.1 or
Card and Socket Services compliant to version 2.0 or later
Windows 98/ME/2000/ NT For data/fax communication: an application, terminal or fax software such as HyperTerminal, ProComm, WinFax, etc.(not included) later. What is in the package:
Your package should contain:
CDMA wireless modem PC Card
Antenna
Software CD with Install and Activation Utilities
Users Guide Optional :
Miniature speaker/microphone - EarSet
Land-based telephone connector with RJ-11 jack for Data Access Arrangement (DAA)
Phone extension cable 5 Installing the CDMA wireless modem Hardware and Drivers Inserting the CDMA wireless modem :
1. Make sure you have Card and Socket Services installed and configured properly on your computer. See your computers documentation for more information. 2. Hold the PC Card with the top label facing upward (see indication on the 3. label) and the antenna pointing away from the computer. Insert the PC Card into the PC Card (PCMCIA) slot of the computer until the card seats firmly. Attention: Do not force the CDMA wireless modem into the slot as it may damage the card or the device. Installing the CDMA wireless modem Windows 98/ME Drivers 1. The first time you insert the card, the New Hardware Wizard window is opened (see figure below). Insert the DC Software into the CD/DVD Drive and click the Next button. 6 2. A window carrying the identification of the card Standard PCMCIA Card Modem appears. Press the Finish button. Your CDMA wireless modem is now ready to work with your communication software. However, for cellular data operation, you must still activate your PC Card to work over the cellular network. See Activating your CDMA wireless modem for Cellular Service on page 22. 7 Installing Your CDMA wireless modem Windows NT Drivers 1. Insert the CDMA wireless modem into the computers type II PC Card Slot. 2. Power On the computer. 3. Click the Start button on the task bar, select Settings from the pop-up menu and then select Control Panel from the new pop-up menu. 4. Double-click the Modems icon in the control Panel window. The Install New Modem window is displayed. If you have already a modem installed on your computer, click the Add Modem button. 5. The following window appears. Check the Dont detect my modem; I will select it from a list check box and press the Next button. 8 6. The selection window is displayed. Press the Have Disk button. 7. In the Install From Disk window, verify that X:\ (Where X is your CD/DVD drive) is displayed in the Copy manufacturers files from box and press the OK button. 9 In the displayed window verify that GlobeWave CDMA wireless modem Cellular modem is selected under Models and click the Next button. 8. 9. Select an available Communication Port in the following window and press the Next button. If no COM port is shown in the Selected Ports box, you have to install a communication port and reboot your computer (refer to your computers user guide for this action). 10 10. Your modem has been set successfully is displayed. Press the Finish button and the system will finish the installation of your modem. 11 11. At the end of the installation the Modem Properties window will be displayed, indicating your modem and the COM port on which it is installed. Click Close to close the window. Your CDMA wireless modem is now ready to work with your communication software. However, for cellular data operation, you must still activate your PC Card to work over the cellular network. See Activating your CDMA wireless modem for Cellular Service on page 22. 12 Ejecting the CDMA wireless modem :
1. Make sure all software accessing the PC Card has been closed. This also includes software that has instructed the PC Card to switch to Auto Answer mode. 2. Press the PCMCIA eject button. 3. Remove the card when it is released. 13 Loading the CDMA wireless modem User Software:
Your CDMA wireless modem users software includes:
Dialer Software - Used to dial cellular voice calls
Activation Software - Used to activate the card for cellular use
Status Software - Advanced cellular status software Using Windows 98/ME and Windows NT:
1. Insert the disk labeled Dialer 3 - Setup/User Software Disk 1 of 3 into your floppy disk drive. 2. Click the Start button on the task bar, select Settings from the pop-up menu and then select Control Panel from the new pop-up menu. 3. Double click Add/Remove Programs, and click the Install button 4. The Install Program from Floppy Disk or CD-ROM Window appears. Click the Next button 5. The Run Installation Program Window appears. Make sure that the Command Line for Installation Program shows A:\Setup and then click the finish button. 6. The Dialer setup screen will be displayed. Press the Next button to continue the installation. 14 7. Choose Destination Location window will be displayed. The software is installed by default to <c:\GlobeWave> directory. If you wish to install it into another directory, press the Browse button and select a different directory to install the software in. Press the Next button. 15 8. The Setup Type window will be displayed. Three types of setup are available:
. Typical installs the Dialer software and Activate utility. Compact installs only the Dialer software. Custom allows you to choose whether or not to install the Activate and Status utilities (the Dialer box should always be checked). Check the command box of the setup type you wish to carry out and then press the Next button. 16 9. The Start Copying Files window is displayed. The Current Settings settings area shows the settings you selected. Press the Next button to continue the installation. 10. The Setup program starts copying files and installing the Dialer. Throughout the installation setup will prompt you to replace the diskette (see figure below). Replace the diskette as required (Disk 2 and Disk 3) and press the OK button. 17 11. At the end of the installation the Setup Complete window is displayed. Press the Finish button to complete the installation. 12. Your user software is now loaded and ready to use and the Dialer icon is added to your Programs menu. 18 Running and Using Dialer 1. The Dialer window is used for dialing, answering an incoming call, retrieving information about the PC card and open the functional windows. 2. Click the Start button on the task bar, select Programs from the pop-up menu and then select Dialer from the new pop-up menu. 3. The Dialer application is opened as shown below:
1 5 6 7 2 3 4 1) Mode label:
Cell cellular phone Line line phone Cell D cellular modem Line D Line modem Signal Strength display displays the level of the received signal. Visible only in the cellular modes. Power display displays the computers battery power. Status label shows the status of the PC card communication:
GlobeWave in landline mode when idle or in Cellular mode in service area No Service when the cellular service is not available Incoming call indicates an incoming call (together with a sound or beep) Number when a number is dialed, it is displayed in this place Connected when connection with the dialed number or the incoming call is established. 5) Dialing label appears after the Send button is pressed and is displayed until connection is established. 6) Roaming label this label is displayed in cellular modes, when the service is provided by other than the home carrier. System label indicates the current used system, A or B. 2) 3) 4) 7) 19 Function window 9 8 10 14 11 13 16 17 18 19 20 21 8) Connection symbol appears when connection with the other party is established. 9) Close button press to exit the dialer. 10) Minimize button minimizes the dialer window and activates the task bar icons. 11) Send press to dial a number or to answer an incoming call. 12) End button press to hang up. 13) Auth/Clr a two functions button:
12 15
Auth used only in cellular modes to send the authentication code. After sending the code the button switches to Clr. Clr clears the last dialed number. 14) Func button opens and closes the functions window. 15) Number keys serve for dialing a number. 7. The functions windows is opened by pressing on the Func button:
16) Auth opens the authentication window. 17) Comm opens the communication window 18) Dialer opens the Dialer Setup window. 19) Audio Opens the audio window. 20) Activate opens the Activate window (only if the Activate utility was installed). 21) Status opens the Status window (only if the Status utility was installed). 20 Task Bar Icons When the dialer is initialized, three icons appear on the task bar. As long as the dialer screen is active, these icons are inactive. Once the Dialer screen is minimized these icons become active. Cellular mode Icon Voice mode Icon - Switched automatically when EarSet plugged in Mode Icon The right icon can have one of the following shapes:
Clicking the icon with the left button of the mouse will restore the Dialer screen and inactivate the task bar icons. Clicking the icon with the right button of the mouse will open a pop-up menu, which contains all the functions of the Functions menu. DAA (RJ11 connector) plugged in Modem mode switched when Landline mode Icon The Signal Icon The middle icon is the signal icon. When you point it with the mouse, a label indicating the received signal level percentage will appear. Clicking the icon with the left button of the mouse will restore the Dialer screen and inactivate the task bar icons. Clicking the icon with the right button of the mouse will open a pop-up menu, which contains all the functions of the Functions menu. The Battery Icon The left icon is the battery icon. When you point it with the mouse, a label indicating the battery voltage will appear. Clicking the icon with the left button of the mouse will restore the Dialer screen and inactivate the task bar icons. Clicking the icon with the right button of the mouse will open a pop-up menu, which contains all the functions of the Functions menu 21 Using the Dialer Making a Call 1. Verify that the PC Card is in the desired mode. 2. Type in the number by pressing the number keys. To correct or change the number, use the Clr button. 3. Press the Send button or the Enter Key to dial the number. 4. To terminate the call and hang-up press the End button or the ESC key. Answering an Incoming Call 1. Verify that the card is in the desired mode. 2. Press the Send button or the Enter Key. 3. To terminate the call and hang-up press the End button or the ESC key. Setting the Communication Options 1. Press the Func button to open the Functions window. 2. Press the Comm button on the functions window. The Communication dialog box is opened (see the figure below) 3. If the Dialer window is minimized, you can click the right button of the mouse on one of the icons on the task bar and select Communication from the pop-up menu. 22 4. Press the Find Modem button in order to scan the computers ports and locate the CDMA wireless modem . 5. Check the Share Comm Port box to retrieve the PC card information when the Dialer window is minimized (the icons on the task bar are active). 23 Setting the Dialer Options 1. Press the Func button to open the Functions window. 2. Press the Dialer button on the functions window. The Dialer Setup dialog box is opened (see the figure below) If the Dialer window is minimized, you can click the right button of the mouse on one of the icons on the task bar and select Dialer from the pop-
up menu. 3. 4. Check the Put in startup box to add the dialer to the startup menu. Uncheck the box to remove the Dialer from the startup menu. When the dialer is added to the startup menu, it will start automatically whenever the Windows system is started. 5. Check the Launch upon startup box to open the Dialer window every time you start the software. Uncheck the box in order to display and activate the task bar icons when the software is initiated. 6. Check the Always on top box to force the Dialer window to be always displayed above any other active window. 7. Check the Dock box, in order to dock the Dialer window to one corner. The check boxes under the Dock box are illuminated and become active. Select the box of the corner you wish to dock the window into. Once you selected a corner and pressed the OK button, the Dialer window will be docked to the desired corner and you will not be able to drag it from there. 8. Press the OK button to confirm and activate your choices. 24 Setting the Audio Options 1. Press the Func button to open the Functions window. 2. Press the Audio button on the functions window. The Audio Setting dialog box is opened (see the figure below) If the Dialer window is minimized, you can click the right button of the mouse on one of the icons on the task bar and select Audio from the pop-
up menu. 3. 4. To select a wav file that will be played when an incoming call is detected, check the Activate modem audio box. Type in the name of the wav file and its path in the box, or select a file using the Browse button. 5. To select a wav file that will be played on low battery power or low signal strength warning, check the Activate audio for warning box. Type in the name of the wav file and its path in the box, or select a file using the Browse button. 6. Press the OK button to confirm your choices and close the dialog box. 25 Important Operational Information Auto-Mode Switching Capability:
Your CDMA wireless modem comes set-up to automatically detect the type of call you are placing. This is done to minimize or eliminate special hardware or software set-ups for your PC Card. Depending on the connections made to your PC Card, the card will switch automatically to one of four (4) different operational modes, Cellular Data, Land-Based Data, Cellular Voice or Land-
Based Voice. The default modes are shown below:
AUTOMATIC MODE SWITCHING DEFAULTS Accessories Communications Mode Cellular Data Mode Cellular Voice Mode Landline Voice Mode Landline Data Mode Antenna Only EarSet & Antenna EarSet & Landline DAA Landline DAA only In addition to the automatic mode defaults, several software definable optional modes can be programmed into the PC Card. Please note that unless the defaults are changed, the PC Card will operate only in the modes shown above. Your CDMA wireless modem is equipped with several features designed to provide simple and reliable cellular data and voice connections. Specifically, the PC Card is equipped with a high performance wave cellular antenna, significant cellular error correction and enhancement firmware, radio shielding, power saving features and auto-mode selecting firmware. Unlike a standard cellular phone, the cellular radio in your PC Card has been designed specifically for a notebook or hand-held computing environment. In most cases, you will be in an environment where good to excellent cellular coverage exists and should have no problem sending and receiving cellular data. However, there are a few tips provided below which, if followed, will further improve your cellular data experience. Mode number 1 3 2 0 26 Cellular Reception:
Your cards antenna can be rotated and detached for removed positioning. Proper use and placement of your antenna can enhance your cellular performance and may be critical for sending and receiving cellular data in locations where you are either far away from the nearest cellular switch or have some bulky obstructions between you and the cellular switch. In all cases, we recommend the following usage guidelines for your cellular antenna. 1. In most cases your antenna should be used directly plugged or into the PC Card. You should always have the antenna pointing vertically towards the ceiling/sky. If you are indoors and have trouble in cellular communications, you should locate the notebook or hand-held computer as close as possible to a window. Radio signals do go through walls, but some of the signal strength is lost, so it is always best to locate yourself near a window where signal degradation is minimized. If you are not receiving enough signal strength from the cellular network to send or receive data, you may have some interference being generated from your computer. In this case, you should remove the antenna and attach it to the antenna extension cable, then plug the extension cable into your PC Card. Positioning the antenna away from noisy sources like computers can sometimes help improve your signal strength and therefore increase your data throughput. 2. 3. 27 Cellular Data Connections with Dial-Up Networking You can make data connections only if the EarSet is NOT connected. If the EarSet is plug in to the modem, it will cause the PC Card to automatically be in a voice mode, not data, and the modem in the PC Card will not initialize. Most communications software programs are set-up to be used with a modem connected to a land-based telephone line. Your CDMA wireless modem is equipped to work with both land-based and cellular-based connections for sending and receiving data and/or voice. While your PC Card is equipped with a variety of error correcting protocols used for sending cellular data, Windows 98 and most communications programs need to be modified to work optimally over the cellular network. Most 32-bit Windows 98 communication programs use Windows Dial-Up Networking as the method to establish a data connection. This section will describe how best to set-up your connections for both land-based and cellular-
based data. Dial-Up Networking Windows 98 Screen 28 Setting Up Dial-Up Networking for Cellular Data Connections:
1. Double click the Make New Connection icon in the Dial-Up Networking window, a Make New Connection window will appear. 2. Enter a name for the cellular connection you wish to establish. 3. Select the CDMA wireless modem Cellular modem as your active Name your cellular data connection Select GlobeWave CDMA wireless modem PC Card modem. If you have configured your CDMA wireless modem as outlined in the previous section, there is no need to select the Configure tab on the Make New Connection window. If you have not yet configured your CDMA wireless modem for cellular use, please select Configure and follow the instructions written above under Installing the CDMA WIRELESS MODEM PC Card Hardware and Drivers on page 6. 5. Select Next and follow the remaining instructions for Dial-Up 6. You are now ready to connect your cellular data call using Dial-Up Networking. Networking. 4. 29 Sending Faxes with Your CDMA wireless modem In addition to cellular and land-based voice and data, your CDMA wireless modem is equipped with cellular and land-based fax capabilities. This section explains how to use these capabilities. But first, the following tips will help you prevent encountering problems when using your PC Card to send faxes.
If possible, do not load more than 1 fax communications software program on your computer. Most fax communication programs use the same system files for operation and conflicts can occur if more than one program is loaded on your computer. If you have more than one fax communications program on your computer, never run both programs at the same time. This will result in resource conflicts with your computer. If you switch from one fax program to another, or if you are switching from one fax program to a separate data communications program, it may be necessary to release or unload the fax driver before running any other modem programs. Fax drivers like to keep hold of the COM port in your computer. You should consult your fax and data communications software for instructions on unloading the fax driver. However, most windows programs display the fax driver as a printer selection, so unloading the driver typically means purging the fax Print jobs from your computer.
You should insert your PC Card prior to launching your communications
software program. Some packages will not recognize the Card if it is inserted after being launched. If this happens, simply exit and re-launch your communications software program. Sending a Cellular Fax Using your CDMA wireless modem
Sending a fax over the cellular network is conceptually the same as sending data, except that fax transmissions are sent using different protocols than data. Therefore, the set-up or configuration of your Card for faxing is the same as it is for sending cellular data (SEE Configuring Your CDMA wireless modem
), except that you need to chose a fax protocol or Fax Class to use for sending faxes. This setting usually takes place in your fax communications software under the setup drop down menu. A Fax Class explains the way image reduction and re-enlargement is processed during fax transmissions. Fax Class 1 & 2 are typically available. Fax Class 1 use software instructions for image management during fax transmissions. Fax 30 Class 2 uses your hardware to accomplish the same task. The image or document will end up looking the same using either Fax Class. Your CDMA wireless modem can send faxes using either Fax Class 1 or Fax Class 2. However, WE RECOMMEND USING FAX CLASS 2 for fax transmissions. Cellular Voice Calls:
Your CDMA wireless modem is equipped with a small ear-phone jack located on the same side of the PC Card as the antenna. This jack can be used with an EarSet to place cellular voice phone calls in the same manner that you would place a cellular voice call with your standard cellular phone. It is important to note that the PC Card automatically selects the mode that it is in by the attachments that are connected to it. If the EarSet is connected, the default mode of the PC Card will automatically switch to voice mode, not data, and the modem in the PC Card will not initialize. Making a voice Call Plug the EarSet into the ear-phone jack. Now your CDMA wireless modem becomes a regular cellular phone. You may use any dialer program to dial the phone number. The software package includes GlobeWave dialer (see Running and Using Dialer on page 19) that can be used for dialing voice calls. You can also setup other available dialer programs to work with your CDMA wireless modem (Consult software vendor documentation for specific setup instructions). Using AT Commands to Dial If you are using AT Commands to dial a phone number for a cellular voice call, you must do the following:
1. Plug the CDMA wireless modem into your notebook or hand-held computer WITHOUT the EarSet plugged into the card. 2. Launch your communication applications software. 3. 4. Enter the Terminal or Command mode in your communications Initialize the Card. program. NOW, plug in the EarSet. Your CDMA wireless modem is ready to use. 31 Limited One-Year Warranty Your This warranty is extended by Globewave Inc. (the company) only to the original purchaser (consumer) for use only. 1. If the Globewave CDMA wireless modem (the product) fails under normal use and service due to an electronic component failure within one
(1) year from the data of purchase, the company, at its option, will repair or replace the defective item with a new or factory rebuilt replacement. 2. In the event the company repairs or replace the product, the repaired or replaced product shall be warranted under the limited warranty for the remainder of the warranty period or for sixty (60) days, whichever is longer. 3. The consumer shall bear the cost of shipping and handling to and from the company. What is covered?
1. The company is not responsible for the availability, coverage and range of the cellular system on which the product is to operate. It is the responsibility of the cellular carrier. 2. This warranty does not cover any failure of equipment not supplied by the company or failure of the product due to misuse including use in other than the normal and customary manner, neglect, accident or improper installation. 3. The company does not warrant in any way the installation, modification, maintenance or service performed by anyone other than the company itself. 4. This warranty does not cover product failure caused by the use of incompatible accessories. There are no other express warranties, whether written or oral, other than this printed limited warranty. All implied warranties, including without limitation the implied warranties of merchantability or fitness for particular purpose, are limited to the duration of this limited warranty. In no event shall the company be liable for incidental or consequential damages of any nature whatsoever, including but not limited to loss profits or commercial loss, to the full extent those damages can be disclaimed by law. 32 APPENDIX A: FDA Consumer Update The U.S. Food and Drug Administrations Center for Devices and Radiological Health Consumer Update on Mobile Phones FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is known--and what remains unknown--about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This information may be used to respond to questions. Why the concern?
Mobile phones emit low levels of radiofrequency energy (i.e., radiofrequency radiation) in the microwave range while being used. They also emit very low levels of radiofrequency energy (RF), considered non-significant, when in the stand-by mode. It is well known that high levels of RF can produce biological damage through heating effects (this is how your microwave oven is able to cook food). However, it is not known whether, to what extent, or through what mechanism, lower levels of RF might cause adverse health effects as well. Although some research has been done to address these questions, no clear picture of the biological effects of this type of radiation has emerged to date. Thus, the available science does not allow us to conclude that mobile phones are absolutely safe, or that they are unsafe. However, the available scientific evidence does not demonstrate any adverse health effects associated with the use of mobile phones. What kinds of phones are in question?
Questions have been raised about hand-held mobile phones, the kind that have a built-in antenna that is positioned close to the user's head during normal telephone conversation. These types of mobile phones are of concern because of the short distance between the phone's antenna--the primary source of the RF--and the person's head. The exposure to RF from mobile phones in which the antenna is located at greater distances from 33 the user (on the outside of a car, for example) is drastically lower than that from hand-held phones, because a person's RF exposure decreases rapidly with distance from the source. The safety of so-called "cordless phones,"
which have a base unit connected to the telephone wiring in a house and which operate at far lower power levels and frequencies, has not been questioned. How much evidence is there that hand-held mobile phones might be harmful?
Briefly, there is not enough evidence to know for sure, either way; however, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods. Animal experiments investigating the effects of RF exposures characteristic of mobile phones have yielded conflicting results. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. In one study, mice genetically altered to be predisposed to developing one type of cancer developed more than twice as many such cancers when they were exposed to RF energy compared to controls. There is much uncertainty among scientists about whether results obtained from animal studies apply to the use of mobile phones. First, it is uncertain how to apply the results obtained in rats and mice to humans. Second, many of the studies that showed increased tumor development used animals that had already been treated with cancer-causing chemicals, and other studies exposed the animals to the RF virtually continuously--up to 22 hours per day. For the past five years in the United States, the mobile phone industry has supported research into the safety of mobile phones. This research has resulted in two findings in particular that merit additional study:
1.In a hospital-based, case-control study, researchers looked for an association between mobile phone use and either glioma (a type of brain cancer) or acoustic neuroma (a benign tumor of the nerve sheath). No statistically 34
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2001-07-23 | 824.7 ~ 848.31 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2001-07-23
|
||||
1 | Applicant's complete, legal business name |
Cell Data Ltd.
|
||||
1 | FCC Registration Number (FRN) |
9999999999
|
||||
1 | Physical Address |
57th Ben Zion Gelis St.
|
||||
1 |
Petach Tikva, N/A 49100
|
|||||
1 |
Israel
|
|||||
app s | TCB Information | |||||
n/a | ||||||
app s | FCC ID | |||||
1 | Grantee Code |
PNN
|
||||
1 | Equipment Product Code |
CELL5000-3
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Y******** M****
|
||||
1 | Title |
V.P. R & D
|
||||
1 | Telephone Number |
972-3********
|
||||
1 | Fax Number |
972-3********
|
||||
1 |
y******@celldata.co.il
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R******** O****
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia
|
|||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R******** O****
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia
|
|||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CDMA Wireless Modem PC Card (PCMCIA) | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output is ERP. This device has been tested for SAR compliance at 2 cm from the antenna for mobile and hand-held configurations. Users must be informed of the operating requirements for satisfying RF exposure compliance. The highest reported SAR value is 1.36 W/kg at 100% duty factor. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R**** O******
|
||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | 824.04 | 848.97 | 0.464 | 2.5 ppm | 40K0F8W | ||||||||||||||||||||||||||||||||||
1 | 2 | 22H | 824.04 | 848.97 | 0.464 | 2.5 ppm | 40K0F1D | ||||||||||||||||||||||||||||||||||
1 | 3 | 22.901(d) | 824.7 | 848.31 | 0.28 | 2.5 ppm | 1M25F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC