Opti-Mouse FF Wireless Optical Mouse English Setup for use Aim the forward end of the mouse at receiver, press the button under the mouse once, then press the connect button on the seat-charger/receiver once, the Status light will ight up, waiting until the light is dark, which means the message has been received successfully, then the selup is completed and it can start using. (Please complete the selup operation in one minute, if exceded, please repeat the steps) Button Function Setup 1.Get into setup from the control desk or pressing the mouse pattern which is in the right-down side of the window directly, wherein function shows below:
* Button: it can be setup. according to the habit of using left or right hand, and the continuous pressing speed of the button of the mouse twice and the numbers of column for each rolling can be adjusted
+ Mouse marking: to setup the patterns of mouse markin
+ wheel: function of hot key function, magnification, and rolling of auto turning
* Movement: used to selup the moving speed of sign of mouse and the length of the dragging tail, indication for non-
order, etc. 2.After function setup, please press Yes to store the new setup value Debug Skill If the mouse cannot work functionally, please follow the method below to exclude the obstacle. 1,.Check whether the connector of USB or PS/2 port is well inserted or not. 2.Whether the positive (inesative (- pole of the battery is arranged in correct direction or not. If the power is low, the movement of the mouse will become disturbed or slow. 3.Reset: operate according to the operating way of | Setup for use Hardware Maintenance and Cleaning While the movement of the mouse is not so smooth or its Speed is abnormal, it shows that you must clean the rolling ball of the mouse. Please follow the steps below:
1.Turn the rolling ball cover which is under the mouse following the arrow direction Copen in clockwise direction, and clo:
se in counterclockwise direction) to take out the rolling ball. 2.Wipe the rolling ball with clean cloth which is dampened with clean water or alcohol, and wipe the dust inside the mouse with clean cloth, after having finished, turn the rolling ball cover back. (Caution: never wipe with organic solvent Environment To dectease external interference which reduces the effective distance, it should be noted below for the mouse and receiver:
1.Please never put the mouse and receiver on iron cabinet and iron desk (it means that there is no metal or interference source around is better), which can influence the RF communication, and reduce the communication istance 2.The optimum position for locating the mouse and receiver is in the distance of computer mainframe for 15-20 cm or in any open space is best. 3.If there are RF products using in the neighbor seat, please keep a distance of more than 1.5m. If there are still problem you cannot solve during using, you can response the unsolved problem to the Customer Service Center . through the e-mail on the website, we ll'explain it for you as soon as possible.