FCC ID: RSNFUSION5S-X20 5 Band Cellular in Building Booster

Fusion5X 2.0 Voice and 4G LTE Signal Booster Kit for Large Buildings User Guide v31518 Thank you for purchasing SureCalls Fusion5X 2.0 cellular signal booster kit. Fusion5X 2.0 was specifically designed to eliminate frustrations over dropped calls, limited range and slow data rates by amplifying incoming and outgoing cellular signals in buildings up to 20,000 square feet. The Fusion5X 2.0 provides enhanced cellular signals for multi-carrier voice and 4G LTE data. If you have any questions during setup, please reach out to our US-based experienced support technicians:

Call: 1-888-365-6283 Email: support@surecall.com Or, visit: www.surecall.com/support

@SureCall Stay up to date with all things SureCall Watch installation, optimization and troubleshooting techniques in our SureCall University YouTube channel 2 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Table of Contents TABLE OF CONTENTS HOW IT WORKS ..................................................................................................................4 PACKAGE CONTENTS ........................................................................................................4 BEFORE INSTALLATION .....................................................................................................7 Installation Overview ...................................................................................................... 7 INSTALLATION ....................................................................................................................8 Step 1. Find the area with the Strongest Signal ............................................................ 8 Step 2. Install the Outdoor Antenna ............................................................................... 9 Option A: Outdoor Omni Antenna .................................................................................. 9 Option B: Outdoor Yagi Antenna ................................................................................. 11 Step 3. Install Indoor Antenna(s) ................................................................................ 12 Option A: Indoor Dome Antenna(s) ............................................................................. 12 Option B: Indoor Ultra Thin Antenna .......................................................................... 14 Option C: Indoor Panel Antenna .................................................................................. 16 Step 4. Install the Signal Booster ................................................................................. 18 IF YOU WANT TO IMPROVE PERFORMANCE ................................................................19 LED INFORMATION ...........................................................................................................20 TROUBLESHOOTING .......................................................................................................21 SPECIFICATIONS ..............................................................................................................22 Kitting Information ........................................................................................................ 23 WARRANTY .......................................................................................................................24 Three-Year Product Warranty ...................................................................................... 24 CONSUMER GUIDELINES ................................................................................................25 3 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com How It Works HOW IT WORKS SureCalls Fusion5X 2.0 is a high-quality bidirectional signal booster that enhances cellular signals to areas that are prone to weak cellular coverage. Fusion5X 2.0 works with two types of antennas:

An outdoor antenna that communicates with the cell tower. One or more indoor antennas that communicates with your cell phone. Signals sent from a cell tower are received by the outdoor antenna, amplified by the booster and then sent to your phone via the indoor antenna. When your phone transmits, the signal is sent to the indoor antenna, and then sent to the cell tower via the outdoor antenna. Outdoor Antenna Indoor Antenna PACKAGE CONTENTS 1. Unpack all package contents. For missing or damaged items, contact your reseller. 2. Turn over the signal booster and record the model and serial number for reference:

Serial #: _______________________________________________________________________________ Purchase Date: _________________________________________________________________________ Keep the carton and packing material to store the product in case you need to return it. 4 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Package Contents Fusion5X 2.0 signal booster kits are available with the following:

One SureCall Fusion5X 2.0 booster with mounting hardware and power supply One outdoor antenna (either Omni or Yagi) One SC-400 low-loss coax cable to connect outdoor antenna to booster One or more indoor antennas (either Dome, Ultra Thin, or Panel) One cable or cabling set per indoor antenna (to connect antennas to signal booster) Also included with kits with multiple indoor antennas, one cable splitter and 30 ft. cable (splitter joins multiple indoor cables leading to booster then connects to booster via 30 ft SC400 cable) Booster Outside Antenna (options) Fusion5X 2.0 Outside Cable Omni (x1) Inside Antenna (options) Yagi (x1) 75 ft cable SC-400 Dome(s) Ultra Thin(s) Panel(s) Inside Cabling (options) Splitter + 30 ft cable SC400

(for multiple antenna kits) 75 ft cable SC-400 50 ft cable SC-240

(x2) with connector Inside Outside Antenna Antenna(s) Model number Model name

(1) Omni (1) Dome SC-Fusion5X2-OD Fusion5X 2.0 Omni / Dome

(1) Omni (4) Dome SC-Fusion5X2-O4D Fusion5X 2.0 Omni / 4 Dome

(1) Omni (1) Panel SC-Fusion5X2-OP Fusion5X 2.0 Omni / Panel

(1) Omni (4) Panel SC-Fusion5X2-O4P Fusion5X 2.0 Omni / 4 Panel

(1) Dome

(1) Yagi SC-Fusion5X2-YD Fusion5X 2.0 Yagi / Dome

(4) Dome

(1) Yagi SC-Fusion5X2-Y4D Fusion5X 2.0 Yagi / 4 Dome

(1) Panel

(1) Yagi SC-Fusion5X2-YP

(1) Yagi

(4) Panel SC-Fusion5X2-Y4P Fusion5X 2.0 Yagi / 4 Panel

(1) Omni (1) Ultra Thin SC-Fusion5X2-OU Fusion5X 2.0 Omni / Ultra Thin SC-Fusion5X2-O4U Fusion5X 2.0 Omni / 4 Ultra Thin (1) Omni (4) Ultra Thin

(1) Ultra Thin SC-Fusion5X2-YU Fusion5X 2.0 Yagi / Ultra Thin

(1) Yagi SC-Fusion5X2-Y4U Fusion5X 2.0 Yagi / 4 Ultra Thin (1) Yagi

(4) Ultra Thin Fusion5X 2.0 Yagi / Panel Outside Cable SC400 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Inside Cable Splitter & Qty Type cable 1 SC400 4 SC400 1 SC400 8 SC240 1 SC400 4 SC400 2 SC240 8 SC240 1 SC400 8 SC240 2 SC240 8 SC240 1 1 1 1

# Connector 4 1 4 4 1 4 5 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Package Contents Note: Fusion5X 2.0 is available in kits that use the following antenna options based on your particular needs. Outside Antenna Options Antenna Type Model No. Usage Coverage Inside Antenna Options Outdoor omni-

directional antenna 2-3 dBi / 3-4 dBi Outdoor directional Yagi antenna 8 dBi Indoor omni-

directional dome antenna 2 dBi / 5 dBi Indoor Omni-

directional Ultra Thin antenna 3.5 dBi / 7.5 dBi Indoor directional panel antenna 7 dBi / 10 dBi SC-288W Omni antennas are the ideal solution for sending/receiving signal from all directions. SC-230W The Yagi antenna is a higher gain solution ideal for low signal locations where the antenna can be aimed to your closest tower. SC-222W SC-228W SC-248W The dome antenna, generally ceiling-mounted, is omni-directional, sending/receiving signal in all directions indoors. SureCalls Ultra Thin higher gain ceiling mount antenna is omni-

directional, sending/receiving signal in all directions indoors. The panel antenna, generally wall-

mounted, provide directional indoor coverage. H. beamwidth: 120; V beamwidth: 100 6 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Before Installation BEFORE INSTALLATION Make sure you have positioned the booster close enough to an existing electrical outlet. Make sure you have sufficient cable length between proposed outdoor antenna location and booster connector. Make sure you have sufficient separation between outdoor antenna and indoor antennas. At least 75 ft. is recommended for best performance. Antenna Separation Required distance between indoor & outdoor antennas p a r atio e a S n n n te A n Outdoor/ Indoor Antenna Separation A minimum of 75 ft. of separation between the outdoor antenna and indoor antennas is recommended for best performance. Reducing antenna separation will reduce the coverage provided by the booster and generally, additional separation will provide better performance. Antenna Aiming For kits that use directional antennas (outside or inside), the directional antenna(s) should be oriented in a way that they do not face the other antenna (see Antenna Aiming Diagram). OK Installation Overview Step 1. Find the outside area that has the strongest signal. (See page 8). Step 2. Install the outdoor antenna in the area identified in step 1. (See ). Step 3. Install the indoor antennas where increased signal is needed. (See page 12). Step 4. Mount the signal booster, connect the outdoor and indoor antenna cables to the signal booster, and connect the booster to an AC power source. (See page 18). 7 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Installation INSTALLATION Step 1. Find the area with the Strongest Signal Using your phone, identify the outside location with the strongest signal for placement of your outside antenna. Generally, this is found above the roofline on the side facing your nearest cell tower and as high as possible where the antenna can see your cell tower. To find the location of your carriers closest cell tower, go to www.antennasearch.com. The coverage area that the booster provides is directly related to the strength of incoming signal received by the outdoor antenna. Mounting the outside antenna where the signal is the strongest will provide the best results. Please note, if signal is extremely weak where the outside antenna is installed, indoor coverage will be limited. Note that Bars are not always a reliable measure of signal. The best way to confirm signal coverage is the ability to place and hold a call. Putting your phone in Field Test mode will also indicate what level of decibels (dB) your phone is currently receiving. Decibels are measured in the negatives, and a score closer to zero indicates you have a better signal. A signal of -120 dB indicates you have no service, while a score of about -50 dB means you have excellent signal strength. For specific dB signal measurements, use the methods below. Apple iPhones: Dial *3001#12345#* and press Call. In the top-left corner, a dB number appears instead of bars. Android devices: download the app Network Signal Info in the Google Play store. Internet: Go to: www.speedtest.net to test your 3G and 4G data rates. Signal Strength B d 0 0 1

-

Poor B d 0 9

-

B d 0 8

-

B d 0 7

-

B d 0 6

-

B d 0 5

-

Good Excellent 8 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Installation Step 2. Install the Outdoor Antenna After identifying the area of strongest signal, choose the surface where you will mount your outside antenna. The location should allow for sufficient separation between the outside antenna and inside antennas. The minimum separating distance recommended for this booster is 75 Ft. Vertical separation is preferred as it is more effective than horizontal separation. See Antenna Separation on page 7 Your Fusion5X 2.0 kit comes with one of two available outside antennas a. An omni antenna b. A directional Yagi antenna Before proceeding, please note:

For either antenna option, mount the outside antenna in the location identified in step 1 above the roofline and as high as possible. Ensure that the mounting area has at least a 3-ft radius clear of obstructions and other radiating elements. Always orient directional antennas to point away from other system antennas (see illustration, Antenna Aiming on page 7). IMPORTANT: Do not collocate antennas or operate the outdoor antenna with any other antenna or signal booster. Option A: Outdoor Omni Antenna The omni antenna is omni-directional, which receives and sends signals in a 360 radius. The provided hardware allow for either a surface mount or pole-mount. For best performance, be sure to place the outdoor antenna at least 75 feet from the indoor antennas. Place the antenna as high as possible. Make sure that the mounting area has at least a 36-inch radius clear of obstructions and other radiating elements. The antenna should be mounted in an upright position. See illustration. Omni antenna with surface mount hardware Pole-mount hardware 9 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Installation To mount antenna to a vertical surface:

1. Using vertical plate of L-bracket, mark position of desired placement. 2. Place vertical L-bracket into desired location and tap the screws, head first, along with sleeve, into stucco 1/2 to 5/8 inches deep into place. (Note: Alternate screws may be required for different surfaces such as wood or concrete.) In this order, place washer, lock washer and nut on each screw and tighten until secure. When tightening screw, sleeve will expand to secure plate. 3. 4. Use provided screws to secure antenna base onto horizontal plate. 5. Connect antenna to cable connector for the outdoor cable provided with your kit and run along route to planned location of your booster. Outdoor Omni Outdoor Cable Planned booster location L-Bracket Screws Nuts &

Washers Anchors /

Sleeves Cable 10 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Installation Option B: Outdoor Yagi Antenna Before installing a Yagi directional antenna, note that the antenna should be mounted on a pole or pipe (not provided), at the highest possible location above the roofline where the antenna can see your cell tower. Mount horizontally, aimed in the direction of your nearest cell tower. To find the location of your carriers closest cell tower, go to www.antennasearch.com. Ensure that the mounting area has at least a 3-ft radius clear of obstructions and other radiating elements and orient the antenna with the drip hole at the bottom. Once you have identified your install location, assemble the u-bolt, bracket, nuts and washers onto a pole or pipe as shown in the illustration. Keep the connections loose enough to allow the antenna to rotate until the optimum direction is found. Once the outside antenna is secured to a pipe or pole, Connect antenna to cable connector for the outdoor cable provided with your kit and run along route to planned location of your booster. Outdoor Yagi Nut Washer U-bolt Bracket Outdoor Cable Drip Hole Low-Loss Outdoor Cable Mounting pole not provided Planned booster location 11 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Installation For indoor dome antennas, mount on a ceiling in a central location where signal is needed. For indoor panel antennas, mount on a wall that faces in the direction signal is needed. Step 3. Install Indoor Antenna(s) Indoor antennas for the Fusion5X 2.0 are omni-directional ceiling mount antennas. One indoor cable or pair of cables is provided per antenna. For kits with multiple antennas, a cable splitter and joining 30ft cable is also supplied. Option A: Indoor Dome Antenna(s) The SC-222W wideband antenna is an omni-directional interior antenna that gathers and sends signals from all sides. Range of antenna is dependent on three factors:

1. Physical obstructions 2. Power generated by booster 3. Signal level received by the outdoor antenna Besides the antenna itself, parts include mounting equipment. It should be mounted on a ceiling pointed down and in a central location for best results. You can also install your interior antenna above the ceiling panel provided there are not materials that could obstruct signals. Outdoor Antenna Inside Cable Planned booster location Outdoor Cable INDOOR LOW-LOSS CABLE Indoor Antenna RF CABLE THREADED MOUNT CEILING PLASTIC NUT 12 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Installation For Each Antenna:

1. Drill a 20 mm diameter hole in the ceiling. The ceiling thickness should be 20 mm, maximum. 2. Unscrew fixing nut from antenna. Place antenna cable through hole. Screw the fixing nut back onto antenna and cable on crawl space side of ceiling and fasten. Tighten fixing nut to secure antenna (do not over-tighten). 3. For kits with a single indoor antenna:

4. Connect female antenna connector to a the indoor antenna cable provided with your kit and run along route toward the planned location of your booster. For kits with multiple indoor antennas:

4. Connect each indoor antenna to a the appropriate indoor antenna cable provided with your kit and run along route toward the planned location of your booster. Join all cables to provided cable splitter. 5. Connect one end of the 30 ft provided cable to the remaining port of the cable splitter labeled INPUT and route cable to the planned location of your booster. Note: Be sure to provide enough separation from outdoor antenna (at least 75 ft. is recommended). Important: Storage and transportation: Store and place in non-extreme room-

temperature and dry environment This antenna should not be used near open fire or flame. Splitter + 30 ft cable

(for multiple antenna kits) Outdoor Antenna 4-Way Splitter Outdoor Cable Indoor Antenna Splitter Cable Planned booster location Indoor Cables Indoor Antenna 13 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Installation Option B: Indoor Ultra Thin Antenna The SC-288W wideband antenna is an omni-directional interior antenna that gathers and sends signals from all sides. Besides the antenna itself, parts include mounting options for an install that is accessible by crawl space or one that is not. Optimally, It should be located central to where signal is needed with minimal obstacles. The range of this antenna is dependent on three factors:

1. Physical obstructions 2. Power generated by booster 3. Signal level received by the outdoor antenna For Each Antenna:

If accessible by crawl space:

1. Drill a 20 mm diameter hole in the ceiling. The size should be large enough to allow the antennas plastic cable base to pass through. 2. Place antenna cable through hole. 3. From crawl space, screw the fixing nut onto antenna and fasten around the threaded plastic cable base. INDOOR CABLE RF ANTENNA CABLE THREADED MOUNT CEILING THREADED NUT If not accessible by crawl space, a metal bracket mount has been provided along with instructions for this mounting option. 14 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com For kits with a single indoor antenna:

4. Connect female antenna connector to a the indoor antenna cabling provided with your kit and run along route toward the planned location of your booster. Installation Single / Multiple Antennas Booster SC400 30 cable Splitter SC240 50 cable Connector SC240 50 cable Antenna For kits with multiple indoor antennas:

1. Connect each indoor antenna to the cabling provided with your kit and run along route toward the planned location of your booster. Join all cables to provided cable splitter. 2. Connect one end of the 30 ft provided cable to the remaining port of the cable splitter labeled INPUT and route cable to the planned location of your booster. Note: Be sure to provide enough separation from outdoor antenna (at least 75 ft. is recommended). Splitter Outdoor Cable Indoor Antenna Splitter Cable Planned booster location Cable Connectors Indoor Cables Indoor Antenna Important: Storage and transportation: Store and place in non-extreme room-temperature and dry environment This antenna should not be used near open fire or flame. 15 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Installation Option C: Indoor Panel Antenna The provided panel antennas are multi-band directional antennas with a 120 reach. They should be mounted facing the area signal is needed. It is also important that they do not point toward the outdoor antenna. Range of antenna is dependent on three factors:

1. Physical obstructions 2. Power generated by booster 3. Signal level received by the outdoor antenna Besides the antenna itself, parts include mounting equipment for a flat horizontal surface. You can also install your interior antenna behind a wall provided there are not materials that could obstruct signals. For Each Indoor Panel Antenna:

1. Choose location for mounting antenna on vertical surface. Ideal height off the ground or floor should be the approximate height of regular cell phone use. 2. Using plate, mark position of desired screw placement with pencil or marker. 3. Screw mounting plate into place with the slide panel protruding towards you. 4. Slide antenna securely onto mounting plate. For kits with a single indoor antenna:

4. Connect female antenna connector to the indoor antenna cable(s) provided with your kit and run along route toward the planned location of your booster. For kits with multiple indoor antennas:

5. Connect each indoor antenna to indoor antenna cabling provided with your kit and run along route toward the planned location of your booster. Join all cables to provided cable splitter. 6. Connect one end of the 30 ft provided cable to the remaining port of the cable splitter labeled INPUT and route cable to the planned location of your booster. Splitter + 30 ft cable

(for multiple antenna kits) Note: Be sure to provide enough separation from outdoor antenna (at least 75 ft. is recommended). Important: Storage and transportation: Store and place in non-extreme room-temperature and dry environment This antenna should not be used near open fire or flame. Fixed stations operating in the 1710-1755 MHz bands are limited to a maximum antenna height of 10 meters above ground. 16 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Outdoor Antenna Splitter Outdoor Cable Splitter Cable Planned booster location Indoor Panel Cable Connectors Indoor Cables RF CABLE SCREWS MOUNTING PLATE INDOOR CABLE Indoor Panel Installation 17 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Installation Step 4. Install the Signal Booster 1. When placing the booster, select a location close to a working AC outlet. Do not expose the signal booster to excessive heat, direct sunlight, moisture, and airtight enclosures. If youd like to mount the booster to a wall, mark location of screw tabs on the wall in the desired location. Use supplied screws or appropriate screws for surface of mounting location and drill through screw tab holes on booster. 2. 3. Connect the outdoor antenna cable to the signal booster connector port marked OUTSIDE and hand-tighten the connection. 4. Connect the cable coming from the indoor antenna or from antennas cable splitter to the booster port marked INSIDE and hand-tighten the connection. 5. Connect the AC power cord to the signal booster. 6. Connect the plug on the other end of the 110V AC power outlet. 7. Turn the boosters power switch on. N connector to indoor antennas Power Jack Power Switch Screw tabs N connector to outside antenna 18 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Installation Outdoor Antenna Splitter Indoor Antenna Outdoor Cable Fusion5x 2.0 Splitter Cable Indoor Cables Power Supply Indoor Antenna IF YOU WANT TO IMPROVE PERFORMANCE 1. Find a location that receives a stronger signal and relocate the outdoor antenna to that location. 2. 3. Visit www.surecall.com/support for installation tips, guides or to request support. Increase the distance between the outdoor and indoor antennas. Note: This booster is rated for 5-20V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster, cause personal injury and void your warranty. 19 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Installation When reading the alert LEDs on your booster, please note the following information:

Only the presence of red or yellow LEDs indicate the presence of an unresolved issue. Note that bars are not always a reliable measure of signal. The best way to confirm signal coverage is the ability to place and hold a call. LED INFORMATION Indication / Resolution Indicates that the frequency band is in use. This is part of normal operation. Indicates that the booster is functioning properly by using Automatic Gain Control (AGC) technology to stabilize the signal entering your booster from the outside antenna. This is part of normal operation. Indicates that additional separation is recommended between the inside and outside antennas to optimize performance. Increased vertical separation is more effective than horizontal separation. If your booster kit uses two directional antennas (example: outside Yagi antenna and inside panel antenna), ensure that they are facing away from one another. This status appears when your booster is experiencing feedback. To resolve this additional separation is needed between the inside and outside antennas to ensure the frequency band will not shut-down. Increased vertical separation is more effective than horizontal separation. If your booster kit uses two directional antennas (example: outside Yagi antenna and inside panel antenna), ensure that they are facing away from one another. The frequency band will shut-down due to too much signal entering the booster, causing it to over-power. To resolve, you can:

1. For kits using an OMNI outside antenna, relocate the outside antenna to a location where the signal is weaker. the signal source. 2. For kits using a YAGI outside antenna, turn the antenna in short increments away from 3. Add an inline attenuator to the cable coming into the outside port of the booster. 4. For boosters with manual gain dials or switches, though not desirable as amplification will not be optimum, lower the dB gain setting in small increments until the light turns green. LED Color Green Green LED Condition Solid Flashing Yellow Flashing Yellow /

Red Alternately Flashing Red Flashing 20 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Troubleshooting TROUBLESHOOTING Problem Resolution Signal booster has no power After installing your booster system, coverage has not improved. Verify that the booster switch is turned on. Be sure the power source is not controlled by a switch that can remove power from the outlet by connecting to an alternate power source. Check the POWER LED on the signal booster. If it is OFF. Contact tech support at:

1-888-365-6283 or support@surecall.com, or go to www.surecall.com/support to contact a representative. Verify that cable connections are tightly fitted to the booster and antennas. Check the installation of your outdoor antenna. Ensure that the mounting area is clear of obstructions and other radiating elements. For kits that use a directional Yagi antenna, verify that the antenna is properly aimed in the direction of your carriers closest cell tower. Check the outdoor signal strength at the site the outdoor antenna. If signal level is low, your resulting coverage will be limited. Remember that Bars are not always a reliable measure of signal. The best way to confirm signal coverage is the ability to place and hold a call. 21 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Specifications SPECIFICATIONS Fusion5X 2.0 Specifications Uplink Frequency Range (MHz):

Downlink Frequency Range (MHz):

Input / Output Impedance:

Maximum Gain:

Noise Figure:

Supported Standards:

AC Input:

Maximum Output Power:

Downlink Power:

Cable:

RF Connectors:

Power Consumption:

Operation Temperature:

Dimensions:

Weight:

FCC:

IC:

698716 / 776787 / 824849 / 18501915 / 17101755 (G Block Included) 728746 / 746757 / 869894 / 19301995 / 21102155 (G Block Included) 50 72 dB 8 dB CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards Input AC 110 V, 60 Hz / Output DC 12 V 1 Watt EIRP

+16 dBm SC-400 / SC-240 N Female (both ends )

<25W

-4 F to +158 F 9.25 x 6.375 x 1.375 inches 4.25 lbs RSNFUSION5S-X20 7784A-FUSIONX Note: The term IC before the radio certification number only signifies that Industry Canada technical specifications were met. 15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Any product modifications that use unauthorized antennas, cables, and/or coupling devices are prohibited by the FCC. Contact FCC for details: 1-888-CALL-FCC. Changes or modifications not expressly approved by SureCall could void the users authority to operate the equipment. 22 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Specifications Gain/Loss Kitting Information Component Prod No. Description Indoor Cable*

Outdoor Antenna*

Outdoor Cable*

1900MHz 4dBi 10dBi 6.52dB 6.17dB 3.56dB 2.09dB 2.83dB 4.31dB 6.17dB 6dBi 7.5dBi 10dBi

-3.5dB

-6.5dB

* All equivalent antennas and cables are suitable for use with the Fusion5x 2.0 booster. SC288W SC230W SC240-40FN; 40Feet SC400-75NN; 75Feet SC240-20FN; 20Feet SC400-20NN; 20Feet SC400-30NN; 30Feet SC400-50NN; 50Feet SC400-75NN; 75Feet SC222W SC228W SC248W SC-WS-2 SC-WS-4 800MHz 3dBi 10dBi 3.98dB 4.41dB 2.29dB 1.62dB 2.12dB 3.14dB 4.41dB 3dBi 3.5dBi 7dBi

-3.5dB

-6.5dB LTE-A 3dBi 10dBi 3.52dB 4.22dB 2.06dB 1.57dB 2.05dB 3.01dB 4.22dB 3dBi 3.5dBi 7dBi

-3.5dB

-6.5dB LTE-V 3dBi 10dBi 3.52dB 4.22dB 2.06dB 1.57dB 2.05dB 3.01dB 4.22dB 3dBi 3.5dBi 7dBi

-3.5dB

-6.5dB Indoor Antenna*

Four splitter 1700MHz\2100MHz 4dBi\4dBi 10dBi\10dBi 6.12dB\6.92dB 5.8dB\6.54dB 3.36dB\3.76dB 1.99dB\2.18dB 2.68dB\2.98dB 4.07 dB \4.56dB 5.8dB \6.54dB 6dBi\6dBi 7.5dBi\7.5dBi 10dBi\10dBi

-3.5dB

-6.5dB Note1: One Indoor Antenna Kit Component Outdoor Antenna Outdoor Cable Indoor Cable Indoor Antenna

* All equivalent antennas and cables are suitable for use with the Fusion5x 2.0 Prod NO. Description SC230W SC240-40FN; 40Feet SC400-75NN; 75Feet SC222W Quantity 1pcs 1pcs 1pcs 1pcs Notes 40 Feet or longer 75 Feet or longer SC222W or other antenna with gain lower than SC222W Note2: Dual Indoor Antenna Kit Notes Component Outdoor Antenna Outdoor Cable Indoor Cable Splitter Cable After Splitting Indoor Antenna

* All equivalent antennas and cables are suitable for use with the Fusion5x 2.0 Prod NO. Description SC230W SC240-40FN; 40Feet SC400-20NN; 20Feet SC-WS-2 SC400-50NN; 50Feet SC248W Quantity 1pcs 1pcs 1pcs 1pcs 2pcs 2pcs 40 Feet or longer 20 Feet or longer 50 Feet or longer SC248W or other antenna with gain lower than SC248W Note3: Four Indoor Antenna Kit Notes Component Outdoor Antenna Outdoor Cable Indoor Cable Splitter Cable After Splitting Indoor Antenna

* All equivalent antennas and cables are suitable for use with the Fusion5x 2.0 Prod NO. Description SC230W SC240-40FN; 40Feet SC400-20NN; 20Feet SC-WS-4 SC400-50NN; 50Feet SC248W Quantity 1pcs 1pcs 1pcs 1pcs 4pcs 4pcs 40 Feet or longer 20 Feet or longer 50 Feet or longer SC248W or other antenna with gain lower than SC248W Note4 Multiple Indoor antenna kit is also an option. 23 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Warranty WARRANTY Three-Year Product Warranty To activate your three-year manufacturers warranty, register your booster at www.SureCall.com SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014. Products returned by customers must be in their original, un-modified condition, shipped in the original or protective packaging with proof-of-purchase documentation enclosed, and a Return Merchandise Authorization (RMA) number printed clearly on the outside of the shipping container. Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster. (The Buyer does not need to include accessories sold in addition to the signal booster, such as antennas or cables.) This warranty does not apply to any product determined by SureCall to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages the products physical or electronic properties. SureCall warrants to the Buyer that each of its products, when shipped, will be free from defects in material and workmanship, and will perform in full accordance with applicable specifications. The limit of liability under this warranty is, at SureCalls option, to repair or replace any product or part thereof which was purchased up to THREE YEARS after May 1, 2014 or TWO YEARS for products purchased before May 1, 2014, as determined by examination by SureCall, prove defective in material and/or workmanship. Warranty returns must first be authorized in writing by SureCall. Disassembly of any SureCall product by anyone other than an authorized representative of SureCall voids this warranty in its entirety. SureCall reserves the right to make changes in any of its products without incurring any obligation to make the same changes on previously delivered products. As a condition to the warranties provided for herein, the Buyer will prepay the shipping charges for all products returned to SureCall for repair, and SureCall will pay the return shipping with the exception of products returned from outside the United States, in which case the Buyer will pay the shipping charges. The Buyer will pay the cost of inspecting and testing any goods returned under the warranty or otherwise, which are found to meet the applicable specifications or which are not defective or not covered by this warranty. Products sold by SureCall shall not be considered defective or non-conforming to the Buyers order if they satisfactorily fulfill the performance requirements that were published in the product specification literature, or in accordance with samples provided by SureCall. This warranty shall not apply to any products or parts thereof which have been subject to accident, negligence, alteration, abuse, or misuse. SureCall makes no warranty whatsoever in respect to accessories or parts not supplied by it. Limitations of Warranty, Damages and Liability:

EXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS, WHETHER EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING. SURECALL AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY CELLPHONE-MATE, INC. FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED OR TO BE FURNISHED, AS THE CASE MAY BE, WHICH IS THE SUBJECT OF CLAIM OR DISPUTE. IN NO EVENT SHALL SURECALL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, HOWSOEVER CAUSED. All matters regarding this warranty shall be interpreted in accordance with the laws of the State of California, and any controversy that cannot be settled directly shall be settled by arbitration in California in accordance with the rules then prevailing of the American Arbitration Association, and judgment upon the award rendered may be entered in any court having jurisdiction thereof. If one or more provisions provided herein are held to be invalid or unenforceable under applicable law, then such provision shall be ineffective and excluded to the extent of such invalidity or unenforceability without affecting in any way the remaining provisions hereof. SureCall has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties, except as may be stated in its written agreement with and for its customers. SureCall shall not be held liable to anyone for any indirect, special or consequential damages due to omissions or errors. The information and specifications in this document are subject to change without notice. 2018. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. 24 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com Consumer Guidelines CONSUMER GUIDELINES This is a CONSUMER device BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your providers consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-051 You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from (i.e. MUST NOT be installed within 20 cm of) any person. You MUST cease operation of this device immediately if requested by the FCC (or ISED in Canada) or a licensed wireless service provider. WARNING: E911 location information may not be provided or may be inaccurate for calls served by using this device. This device may operate in a fixed location only, for in-building use. Ce produit est un appareil de CONSOMMATION AVANT DE LUTILISER, vous DEVEZ ENREGISTRER CE DISPOSITIF auprs de votre fournisseur de services cellulaires et obtenir son consentement. La plupart des fournisseurs de services cellulaires autorisent lutilisation damplificateurs de signal. Il se peut que certains fournisseurs nautorisent pas lutilisation de ce dispositif sur leur rseau. Si vous ntes pas sr, contactez-le. Au Canada, AVANT DE LUTILISER vous devez rpondre toutes les exigences ISED CPC-2-1-052 Vous DEVEZ utiliser ce dispositif avec les antennes et les cbles autoriss, tel que le spcifie le fabricant. Les antennes DOIVENT tre installes au moins 20 cm (8 po) (NE DOIVENT PAS tre installes moins de 20 cm) de toute personne avoisinante. Vous DEVEZ arrter cet appareil immdiatement la demande de la FCC (ISED au Canada) ou de tout fournisseur de services cellulaires autoris. AVERTISSEMENT: Il se peut que les informations relatives la localisation E911 ne soient pas disponibles ou soient inexactes pour les appels qui utilisent cet appareil. Cet appareil peut fonctionner seulement un emplacement fixe lintrieur dun btiment;

Register your cellular booster with your wireless carrier at the following urls:

Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html AT&T: https://securec45.securewebsession.com/attsignalbooster.com/

T-Mobile: https://support.t-mobile.com/docs/DOC-9827 Sprint: https://www.sprint.com/legal/fcc_boosters.html U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) (Canada) :

This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation The Manufacturers rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device. Cet appareillage numrique de la classe B rpond a toutes les exigencies de linterfrence canadienne causant des rglements dquipment. Lopration est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer linterfrence nocive, et (2) ce dispositif doit accepter nimporte quelle intrference reue, y compris lintrference qui peut causer lopration peu dsire. La puissance de sortie nominale indique par le fabricant pour cet appareil concerne son fonctionnement avec porteuse unique. Pour des appareils avec porteuses multiples, on doit rduire la valeur nominale de 3,5 dB, surtout si le signal de sortie est retransmis et quil peut causer du brouillage aux utilisateurs de bandes adjacentes. Une telle rduction doit porter sur la puissance dentre ou sur le gain, et ne doit pas se faire au moyen dun attnuateur raccord la sortie du dispositif.

[1]

[2]

For details on the requirements specified in ISED CPC-2-1-05, visit: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html Pour plus de dtails sur les exigences ISED CPC-2-1-05, reportez-vous au site: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/

sf08942.html 25 SureCall | 1-888-365-6283 | support@surecall.com | www.surecall.com 48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 www.surecall.com