Fusion7 All-in-One Cellular, Wi-Fi, and HDTV Booster Kit User Guide Table of Contents Thank you for purchasing SureCalls Fusion7 cellular, Wi-Fi and HDTV booster kit. If you have any questions while assembling this kit please contact SureCalls tech support team at: 1-888-365-6283 or email us at: support@surecall.com. Before installing your booster you need to register it with your carrier. You can do so online at the following urls:
Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html AT&T: https://securec45.securewebsession.com/attsignalbooster.com/
T-Mobile: https://www.signalboosterregistration.com/
Sprint: https://www.sprint.com/legal/fcc_boosters.html U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp How It Works Pg. 3 Package Contents Pg. 4-5 Installation Overview Pg. 6 Installing Your Hardware Finding the Strongest Signal Pg. 7 Installing the Outside Anntenna Pg. 8-9 Installing the Insides Anntenna Pg. 10-11 Installing Signal Booster Pg. 12-13 Configure Gain Setting Pg. 14 Troubleshooting Pg. 15-16 Specification Pg. 16 Kitting Information Pg. 17 Warranty Pg. 18-19 Safety Information Pg. 19 2 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com How It Works SureCalls Fusion7 is a high-quality bidirectional signal booster that enhances cellular signals to areas that are prone to weak cellular coverage. In addition, the Fusion7 has a built-in Wi-Fi router that extends users current network coverage. An HDTV booster is also integrated in the Fusion7 which brings locally aired HDTV stations, and with the built-in Wi-
Fi it provides enhanced streaming video through Netflix and other on-demand streaming media providers. The cellular component of the Fusion7 works with two antennas:
An inside antenna that communicates with your cell phone. An outside antenna that communicates with the cell tower. Signals sent from a cell tower are received by the outside antenna, amplified by the booster and then sent to your phone via the inside antenna. When your phone transmits, the signal is sent to the inside antenna, and then sent to the cell tower via the outside antenna. The Wi-Fi component of the Fusion7 works by connecting your external modem to the WAN port on the Fusion 7 with the provided Ethernet cable. The booster will then extend your existing Wi-Fi throughout the coverage area. The HDTV component of the Fusion7 works with one HDTV antenna. HDTV broadcasts are picked up by the outside antenna, boosted through the Fusion7 which connects to your television though the provided RG6 cable enabling the television to access a greater num-
ber of high-definition television stations. Outside Antenna Inside Antenna Coaxial Cable Signal Booster 3 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Package Contents 1. Unpack all package contents. For missing or damaged items, contact your reseller. 2. Turn over the signal booster and record the model and serial number for reference:
Serial #:
Purchase Date:
3. Keep the carton and packing material to store the product in case you need to return it. Standard Fusion7 signal booster packages include the following items:
One SureCall Fusion7 booster with power supply One outside antenna Cable for connecting the outside antenna to the signal booster One inside antenna Cable for connecting the inside antenna to the signal booster Signal Booster Fusion7 SC-400 Cables and RG6 Outside Antenna (Option) Inside Antenna HDTV antenna Omni Yagi CM288W Omni CM230W-S Yagi Warning: Unauthorized antennas, cables, and/or coupling devices are prohibited by FCC new rules. Please contact the FCC for details:
CM222W Dome 1-888-CALL- FCC. Changes or modifications not expressly approved by SureCall could void the users authority to operate the equipment. Dome 4 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Package Contents Note: Fusion7 is available in four kits that are customized to your particular needs. Please determine which kit you have from the following list:
Model SC-SEPTH/O-OD-Kit Package Options 1 Oudoor Omni, 1HDTV and 1 Inside Dome Antenna, 30 SC-400 coax cable and 50 and 75 RG6 cable SC-SEPTH/O-YP-Kit 1 Oudoor Yagi, 1HDTV and 1 Inside Dome Antenna, 30 SC-400 coax cable and 50 and 75 RG6 cable For a detailed description, see Kitting Information on page 21. Antenna Type Model No. Usage Coverage Omni Outdoor Antenna SC-288W Yagi Outdoor Antenna SC-230W-S Dome Antenna SC-222W Omni antennas are ideal for topographies with minimal obstacles, they have 360 reception Yagi antennas are designed to reach carrier towers that are up to 30 miles away Dome antennas are designed for central locations with 360 coverage Note: Due to the recent change of our company name from Cellphone-Mate (CM) to SureCall (SC) we have changed the prefix on all of our antennas, cables and accessories from CM to SC-. 5 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Before You Install Step 1. Make sure you have positioned the booster close enough to an existing electrical outlet,TV and Modem. Step 2. Make sure you have sufficient cable length between proposed outside antenna, HDTV antenna location and booster connector. Step 3 Make sure you have sufficient cable length between proposed inside antenna location and booster connector. Additional cable may be purchased from your dealer, if needed. Section 1: Cellular Installation Step 1. Find the outside area that has the strongest cellular signal
(See page 7 for directions as needed) Step 2. Install the outside cellular antenna in the area identified in step 1. (See page 8-9 for directions as needed) Step 3. Install the inside antenna. (See page 10-11 for directions as needed) Step 4. Mount the signal booster, connect the outside and inside antenna cables to the signal booster, and connect the booster to an AC power source. (See page 13-14 for directions if needed) Outside Antenna Inside Antenna Coaxial Cable Signal Booster FCC 27.50(d)(4) Statement: Fixed, mobile and portable (hand-held) stations operating in the 1720-1755 MHz band are limited 1 Watt EIRP. Fixed stations operating in this band are limited to a maximum antenna height of 10 meters above ground. Mobile and portable stations operating in this band must employ a means for limiting power to the minimum necessary for successful communications. 6 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Installing Your Hardware Step 1. Find the area with the Strongest Signal The signal booster requires a minimum cellular signal of low 100 dBm. Signal readings usually appear as a negative number (for example, -85). The more bars you get, the closer the dB gets to zero. Aim for a signal close to -50dB. Signals stronger than -50dB may cause the booster to shut down (see the graph below). If you have an omni outside antenna and your signal is too weak you may need a yagi antenna, which can be aimed at the closest antenna tower. Before installing the outside antenna, find the area with the strongest cellular signal source from your service provider by following the directions below. You can also go to www.antennasearch.com to find the general location of carrier towers. Measure the strength of the existing cellular signal in various locations. Apple iPhones: Dial *3001#12345#* and press Call. In the top-left corner, a dB number appears instead of bars. Android devices: download apps such as Network Signal Info in the Google Play store to measure signal strength. Search check real signal strength to find other cell signal measurement apps. Internet: go to www.speedtest.net to test 3G and 4G data rates. Signal Strength B d 0 0 1
-
B d 0 1 1
-
Poor B d 0 9
-
Good B d 0 8
-
B d 0 7
-
B d 0 6
-
B d 0 5
-
Excellent Outside Antenna Cell Tower 2. Select a location away from buildings, walls, trees, hills, and other terrain features that can block or reflect wireless signals (12-inch clear radius is recommended). Note: Where you install your outside antenna in relation to the carriers cell phone tower also determines signal strength. Although cell phone carriers try to place towers for maximum coverage, local ordinances and terrain features can restrict tower locations, which can limit signal strength at your location. 7 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Installing Your Hardware Step 2. Install the Outside Cellular Antenna 1. Outside omni antennas receive and send signals in a 360 radius. Yagi, or directional antennas work best when facing the direction of cellular phone towers. Mount the outside antenna as high as possible. If you are installing a Yagi antenna set it up facing the cellular tower in the area where you located the best signal source (see step 1 on the previous page). 2. Make sure the mounting area has at least a 12-inch radius clear of obstructions and other radiating elements. 3. Do not collocate antennas or operate the outside antenna with any other antenna or signal booster. 4. Run the SC-400 cable from the outside antenna to the signal booster. Hand tighten the connection Optional 1- Outside Omni Optional 2 - Outside Yagi Fusion5 IMPORTANT: For boosters enhancing T-Mobiles AWS frequencies, the FCC has stated for consumer signal boosters operating as a fixed station in the 1710 - 1755 MHz uplink 2110 - 2155 downlink bands, the users or installation manual must contain the 30 foot height restriction requirements per FCC 27.50(d)(4). 8 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Installing Your Hardware Fusion7s omni antennas come with equipment for mounting on a vertical wall. For best results the antenna should be mounted in an upright position. Step 1: Unscrew antenna from L-mounting bracket on antenna base with hands, or wrench, if needed. Step 2: Using vertical plate of bracket, mark position of desired placement with pencil or marker. Step 3: Unscrew nut on end of stucco screw and remove it along with lock washer and regular washer. Step 4: Place vertical plate into desired location and tap the screws head first, along with sleeve, into stucco 12 to 5/8 deep into place. Step 5: In this order, place washer, lock washer and nut on each screw and tighten until secure. When tightening screw, sleeve will expand to secure plate. Screw antenna securely back onto horizontal plate. Note: If desired surface for installation plate is wood or concrete, wood or masonry screws for L-plate will have to be purchased separately. 9 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Installing Your Hardware Step 3. Install the Inside Antenna Inside antennas come in omni-directional (dome) and flat panel versions. Required Between Outside and Inside Antenna n aratio p a s e n n nte a Antenna Separation Table Amplifier gain Min. separation (ad) 40dB 5-6 45dB 15-20 50dB 50 55dB 60 65dB 75-80 72dB 100-110 Note: As you can see from the table above, acquiring the recommended inside and outside antenna separation optimizes coverage significantly. Any reduced antenna separation reduces the boosters coverage. 1. If your indoor antenna is a dome type, mount it on the ceiling in a central location. 2. If your indoor antenna is a flat panel, install it against a wall or surface projecting the area where you want reception. Point the antenna away from the outside antenna. To avoid interference stay a minimum distance of 3 feet from the panel antenna. 3. Run the SC-400 cable from the inside antenna to the signal booster. Connect the inside antenna to the booster connector marked INSIDE (see page 13 4. Hand tighten the connection. Fusion5 Optional 1- Inside Dome Optional 2 - Inside Panel Note: see next page for outside antenna installation details. 10 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Installing Your Hardware The SC-222W multi-band plastic antenna is an omni-directional interior antenna that gathers signals from all sides. Range of antenna is dependent on three factors:
1) physical obstructions, 2) power generated by booster and 3) reception from outside signal received and distributed by outside antenna. Besides the antenna itself, parts include mounting equipment for either a flat horizontal surface or a wall. It should be mounted in an upright position for best results. You can also install your interior antenna above the ceiling panel provided your ceiling isnt made of a material that could obstruct signals from the booster. Step 1: Drill a 35mm diameter hole in the ceiling. The ceiling thickness should be 20mm, maximum. Step 2: Unscrew fixing nut from antenna. Place antenna cable through hole. Screw the fixing nut back onto antenna and cable on crawl space side of ceiling and fasten. Step 3: Attach the N-Female connection from the interior antenna to the cable leading to the connector labeled INSIDE, on your booster. Step 4: Tighten fixing nut to secure antenna (do not over-tighten). Storage and transportation: Store and place in non-extreme room-temperature and dry environment Attention: This antenna should not be used near open fire or flame 11 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Installing Your Hardware Step 4. Install the Signal Booster 1. Select a location close to a working AC outlet. Do not expose the signal booster to excessive heat, direct sunlight, moisture, and airtight enclosures. 2. If youd like to mount the booster to a wall, mark location of screw tabs on the wall in the desired location 3. Use supplied screws or appropriate screws for surface of mounting location and drill through screw tab holes on booster. 4. Connect the outside antenna cable to the signal booster connector marked OUTSIDE. Hand-tighten the connection. 5. Connect the inside antenna cable to the signal booster connector marked INSIDE. Hand-tighten the connection. 6. Connect the AC power cord to the signal booster. 7. Connect the plug on the other end of the 110V AC power outlet. 8. Turn the boosters power switch on. 12 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Section 2 HDTV Installation 1.) Attach inside Coax cable to the HDTV1 access port on the side of the booster. 2.) Attach the other end of the cable to the Antenna port on the back of the television. 3.) Attach the outside Coax cable to the HDTV out port on the side of the booster. 4.) Connect the other end of the outside coax cable to the outside HDTV antenna. Scanning Local Television Channels. On your TVs remote control press the Input or Source button, from there youll select TV or Air. Consult you TV manual for detailed instructions. After selecting Antenna or Air press the menu button. Choose the antenna option followed by Auto Program. You may then need to select the Air button where you can start searching for local channels. The TV will automatically search all available stations. Once the scan is complete, you can exit your TV menu and begin watching free, high-definition television Section 3: WiFi Connection Installation Instructions:
1). Plug the Ethernet cable from your modem/router into the WAN port on the side of the booster. 2). Power on the booster. The WAN and WLAN lights on the Fusion7 status LEDs will light up. 3). On your computer, tablet or cell phone search available wireless networks and choose Tenda_38CB18, a security password isnt needed. 4). Enjoy enhanced WiFi throughout your workplace or home. 13 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Installing your Hardware Booster Hardware The following image shows the key hardware components on the cellullar booster. Refer to this image as you install your Fusion5 kit components. SC288W SC305W-H SC400-35 35 Coax Cable RG6-50ft Top View WAN Bottom View RG6-50ft RG6-50ft TV or Television Device SC400-75 75 Coax Cable SC222W TV or Television Device The signal booster turns on automatically. Note: If the Power LED does not turn ON or the Alert LEDs continue to flash, (see PAGES 15-16).This booster is rated for 5-20V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster, cause personal injury, and void your warranty 14 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Installing Your Hardware Step 5. Configure Gain Settings 1. Find the PCS, Cellular, and LTE/AWS dials on top of the signal booter. 2. Set the dials according to the coverage area and the distance between the indoor and outdoor antennas (see next page) If Coverage Area is ... 3000 - 6000 square feet 2000 - 4000 square feet 1500 - 2000 square feet 1000 -1500 square feet 1000 square feet and below And Antenna Separation is ... Set All Dial to ... 60 - 80 feet 50 - 75 feet 40 - 60 feet 35 - 50 feet 30 - 35 feet 65
(default setting) 60 60 60 60 Note: As you can see from the table above, acquiring the recommended indoor and outdoor antenna separation optimizes coverage significantly. Any reduced antenna separation reduces the boosters cellular signal capabilities. If you Want to Improve Coverage 1. Find a location that receives a stronger signal and relocate the outside antenna to that location. 2. Increase the distance between the outside and inside antennas. 3. Be sure your signal boosters dB gain is turned up to maximum gain on each dial. WARNING: Do not adjust the uplink and downlink dB attenuation settings more than 20dB. This could cause the affected band to shut down 15 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Troubleshooting In the event you encounter a problem, follow the suggestions below to resolve the issue. Problem Resolution Signal booster has no power After installing your signal booster system, you have no signal or reception. Verify that the booster switch is turned on. Connect the power supply to an alternate power source. Be sure the AC outlet is working and is not controlled by a wall switch that can cut power to the outlet. If the green POWER LED on the signal booster is OFF, return the power supply to SureCall. Contact tech support at 1-888- 365-6283 or support@surecall.com, or go to www.surecall.com and log on to online support to receive a Return Merchandise Authorization (RMA). Check the strength of the outside signal as close as you can to the outside antenna. (see instructions on page 7) Double-check all signal booster and antenna cable connections. Be sure your signal boosters dB gain is turned up to full power on each dial. (see page14) LED flashing yellow This means that the Automatic Gain Control (AGC) is adjusting which is part of the boosters normal operation One of the red LEDs next to the dials on your signal booster is flashing red. Your signal booster restarted and shut down for 15 minutes, and is now shut down permanently. The red LED goes ON. Turn down the dB gain on the dial until the light goes OFF or turns yellow. Be sure the inside panel antenna is facing away from the outside antenna. Use the recommended antenna separation:
72dB: 100-110 ft. separation 65dB: 75-80 ft. separation 55dB: 60 ft. separation 50dB: 50 ft. separation 45dB: 15-20 ft. separation 40dB: 5-6 ft. separation Each SureCall signal booster is equipped with Auto Shutdown to prevent cell tower interference. The outside antenna may be too close to the cell tower. Try moving the outside antenna to a location that provides more separation from the cellular tower. If you cant attain enough separation try lowering the elevation of the antenna to decrease the signal from the tower. More antenna separation is needed from the cellular tower. You can try lessening the signal by placing the outside antenna behind a structure or sheet metal barrier. You can also add an attenuator between the cable and booster connection to decrease the signal. The Power LED does not turn ON Be sure the AC outlet is working and is not controlled by a wall switch that can cut power to the outlet. 16 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Specifications Problem The Alert LEDs flash after the initial activation period. The Alert LEDs continue to flash Your signal booster has no power. Resolution Lower the dial above the blinking LED by 5dB (for example, from 65 to 60) and monitor the bars on your cell phone to see whether reception has improved. The singal booster shuts down automatically, and then restarts after 60 seconds. Turn down the PCS, Cellular or LTE/AWS dial that is oscillating dial that is to prevent the signal booster from shutting down autimatically. Verify that the switch on the power supply is turned on and red LED is ON. Connect the power supply to an alternate power source. Be sure the power source is not controlled by a switch that can remove power from the outlet. Check the green POWER LED on the signal booster. If it is OFF, return the power supply to SureCall. Contact tech support at 1-888-365-6283 or support@surecall.com, or go to www.surecall.com and log on to online support to receive an RMA. Product Name Fusion7 Uplink Frequency Range (MHz):
Downlink Frequency Range (MHz):
Input Impedance:
Maximum Gain:
Noise Figure:
VSWR:
Supported Standards:
AC Input:
Maximum Output Power:
Cable:
RF Connectors:
Power Consumption:
Operation Temperature:
Dimensions:
Weight:
FCC (USA):
698-716 / 776 787 / 824-849 1850-1910/ 1710-1755 728-746 / 746 757 / 869-894 1930-1990 / 2110-2155 50 / 75 ( HDTV ) Cellular 72dB / WiFi 23dB / HDTV 23dB. 8 dB 2.0 CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards Input AC110V, 60 Hz; Output DC 5-20V 1 Watt EIRP SC-400 / RG6 RTNC / N Female
<50W
-4F to +158F 10 x 9 x 2.25 9.5 lbs RSNFUSION-7 17 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Kitting Information Kitting Information Product Number Description Gain / Loss Component Outside Antennas*
Outside Cable Inside Antenna*
Inside Cable Description SC-288W SC-230W RG6 50FT SC-400-75NN (75 Feet) SC-248W SC-222W SC-400-30NN (30 Feet) LTE-A (Verizon
& ATT) 700 Mhz Cellular 800 MHz PCS 1900 MHz 4 dBi 10 dBi 3 dBi 10 dBi HDTV 6.22 dB/-6.68dB 4.41dB 7 dBi 3 dBi 2.12 dB 6.17dB 10 dBi 6 dBi 2.83 dB 3 dBi 10 dBi
-4.22dB 7 dBi 3 dBi 2.05dB AWS ( T- Mobile) 1700 \ 2100 MHz 4 dBi 10 dBi 6.54 dB 10 dBi 6 dBi 2.98 dB
*All equivalent antennas and cables are suitable for use with the Fusion7 booster. Note: Due to the recent change of our company name from Cellphone-Mate (CM) to SureCall (SC) we have changed the prefix on all of our antennas, cables and accessories from CM to SC-. 18 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Warranty Three-Year Product Warranty SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifica-
tions are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014. Products returned by customers must be in their original, un-modified condition, shipped in the original or protective packaging with proof-of-purchase documentation enclosed, and a Return Merchandise Authorization (RMA) number printed clearly on the outside of the shipping container. Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-
6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster. (The Buyer does not need to include accessories sold in addition to the signal booster, such as antennas or cables.) This warranty does not apply to any product determined by SureCall to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages the products physical or electronic properties. SureCall warrants to the Buyer that each of its products, when shipped, will be free from defects in material and workman-
ship, and will perform in full accordance with applicable specifications. The limit of liability under this warranty is, at SureCalls option, to repair or replace any product or part thereof which was purchased up to THREE YEARS after May 1, 2014 or TWO YEARS for products purchased before May 1, 2014, as determined by examination by SureCall, prove defective in material and/or workmanship. Warranty returns must first be authorized in writing by SureCall. Disassembly of any SureCall product by anyone other than an authorized representative of SureCall voids this warranty in its entirety. SureCall reserves the right to make changes in any of its products without incurring any obligation to make the same changes on previously delivered products. As a condition to the warranties provided for herein, the Buyer will prepay the shipping charges for all products returned to SureCall for repair, and SureCall will pay the return shipping with the exception of products returned from outside the United States, in which case the Buyer will pay the shipping charges. The Buyer will pay the cost of inspecting and testing any goods returned under the warranty or otherwise, which are found to meet the applicable specifications or which are not defective or not covered by this warranty. Products sold by SureCall shall not be considered defective or non-conforming to the Buyers order if they satisfactorily fulfill the performance requirements that were published in the product specification literature, or in accordance with samples provided by SureCall. This warranty shall not apply to any products or parts thereof which have been subject to accident, negligence, alteration, abuse, or misuse. SureCall makes no warranty whatsoever in respect to accessories or parts not supplied by it. 19 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com Warranty Limitations of Warranty, Damages and Liability:
EXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUARANTEES, OR REPRE-
SENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS, WHETHER EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING. SURECALL AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY CELLPHONE-MATE, INC. FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED OR TO BE FURNISHED, AS THE CASE MAY BE, WHICH IS THE SUBJECT OF CLAIM OR DISPUTE. IN NO EVENT SHALL SURECALL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, HOWSOEVER CAUSED. All matters regarding this warranty shall be interpreted in accordance with the laws of the State of California, and any controversy that cannot be settled directly shall be settled by arbitration in California in accordance with the rules then prevailing of the American Arbitration Associa-
tion, and judgment upon the award rendered may be entered in any court having jurisdiction thereof. If one or more provisions provided herein are held to be invalid or unenforceable under applicable law, then such provision shall be ineffective and excluded to the extent of such invalidity or unenforceability without affecting in any way the remaining provisions hereof. SAFETY INFORMATION This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your providers consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING: E911 location information may not be provided or may be inaccurate for calls served BY USING THIS DEVICE. 15.19 Statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this decide must accept any interference received, including interference that may cause undesired operation. 48346 Milmont Drive Fremont, California 94538 USA 888.365.6283 Fax: 510.996.7250 www.surecall.com SureCall has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties, except as may be stated in its written agreement with and for its customers.SureCall shall not be held liable to anyone for any indirect, special or consequential damages due to omissions or errors. The information and specifications in this document are subject to change without notice. 2014. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. 20 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your providers consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. This device may be operated ONLY in a fixed location for in-building use. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC 27.50(d)(4) Statement: Fixed, mobile and portable (hand-held) stations operating in the 1720-1755 MHz band are limited 1 Watt EIRP. Fixed stations operating in this band are limited to a maximum antenna height of 10 meters above ground. Mobile and portable stations operating in this band must employ a means for limiting power to the minimum necessary for successful communications. SureCall | 48346 Milmont Dirve, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com 21 SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com