FCC ID: RSNLTE-V Quad Band Signal Booster

LTE Active Antenna Draft v2 LTE Active Antenna User Manual 1 LTE Active Antenna User Manual Table of Contents Overview ...................................................................................................................................................................... 3 Before Installation ..................................................................................................................................................... 3 Contents ........................................................................................................................................................ 3 Installation ................................................................................................................................................................... 3 Connect the Power Injector Antenna Cable onto the Router Antenna Port ........................... 3 Connect the Cable from the LTE Active Antenna to the Power Injector ................................. 3 Plug the Power Adapter into a Nearby Outlet with the Other End into the Power Injector .. 3 Identify the Location of Best Signal for Placement of the LTE Active Antenna ..................... 4 Mount the Antenna at the Identified Location .............................................................................. 4 Route and Secure the Cables ........................................................................................................ 4 Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Product specifications ............................................................................................................................................. 5 Regulatory Information ............................................................................................................................................ 5 2 LTE Active Antenna User Manual The LTE Active Antenna is a signal booster that, when placed on a window and connected to your router, delivers improved LTE signal to the LTE Router to improve data throughput speeds. Overview Before Installation Remove Contents from packaging Contents LTE Active Antenna with mounting adhesive Power Adapter Power Injector Velcro straps and cable clips Figure 1: Contents Installation Step 1 Connect the Power Injector Antenna Cable onto the Antenna Port Step 2 Connect the Cable from the LTE Active Antenna to the Power Injector Step 3 Power up using the Power Adapter and connect the other end into the Power Injector Plug in the power adapter, then plug the other end into the power injector. Once connected, a GREEN LED on the power injector will appear to indicate that the LTE Active Antenna is receiving power. If the power injector is showing a RED LED, please double check that all cables are connected securely. If your LTE Router was not already turned on, please turn it on now. Please note If you power on the LTE Router while the LTE Active Antenna is connected to the antenna port on the router but not connected to power, the router may not complete its boot up process properly and will not work as expected. If this occurs, please turn off the router and ensure the LTE Active Antenna is connected to power before turning the LTE Router back on. 3 LTE Active Antenna User Manual Step 4 Identify the Location for Placement of the LTE Active Antenna Identifying and mounting the LTE Active Antenna in the location of your with the best available LTE signal will provide the best performance of your LTE Router. The best signal and recommended mounting location for the antenna will be on a window. Step 5 Mount the Antenna at the Identified Location Once the best mounting location has been identified, prepare the area by cleaning it first (rubbing alcohol, window cleaner and similar solutions work well). Once the area has thoroughly dried, mount the antenna by removing the paper backing from the adhesive padding and firmly pressing it against the cleaned area. Please ensure the antenna is mounted vertically with the cable pointing down for the best performance. Step 6 Route and Secure the Cables Using the included cable clips and Velcro straps, route the cables as desired for the cleanest possible installation. If Velcro straps are used, coil the excess cable before wrapping to ensure a clean look and installation. 4 LTE Active Antenna User Manual Product specifications Name Model:

LTE Active Antenna SC-LTE-V Certifications:

FCC (North America Wireless Network:

LTE Technology Compatibility:

4G-LTE Cable (Antenna):

RG174; 20 ft. Cable (Power Injector):

RG174; 7 ft. Regulatory Information LTE Active Antenna FCC ID: RSNLTE-V THIS IS A CONSUMER DEVICE BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your providers consent. Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html AT&T: https://securec45.securewebsession.com/attsignalbooster.com/

T-Mobile: https://support.t-mobile.com/docs/DOC-9827 Sprint: https://www.sprint.com/legal/fcc_boosters.html U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 Inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wire less service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. CLASS B EQUIPMENT: This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipme nt is operated in a residential environment. This equipment generates radio frequency energy and is designed for use in accordance with the manufacturers user manual. However, there is no guarantee that interference will not occur in any particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Increase the separation between the equipment and the receiver. 5 LTE Active Antenna User Manual Consult the dealer or an experienced radio/television technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate undesired operation. this equipment. FCC 27.50(d)(4) Statement: Fixed, mobile and portable (hand-held) stations operating in the 1720-1755 MHz band are limited to 1 Watt EIRP. Fixed stations operating in this band are limited to a maximum antenna height of 10 meters above ground. Mobile and portable stations operating in this band must employ a means for limiting power to the minimum necessary for successful communications. When used with an y mobile device utilizing the 1710-1755 MHz band, the FCC limits booster equipment placement to a maximum of 10 meters above ground level. Installation of this equipment which does not comply with federal requirements may subject the owner to FCC enforcement action. RF Exposure: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 32 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 6

48346 Milmont Dr., Fremont, CA 94538 Phone: 510-770-0469 Fax: 510-996-7250 www.surecall.com Antenna Kitting Information M2M-4 Kit Component Prod No. Description LTE-V 800MHz 1900MHz 1700MHz\2100MHz Gain/Loss Notes Outdoor Antenna M2M-4 Integrated antenna 2dBi Indoor Antenna

Indoor Cable RG174-7FT7Feet 3dB 2dBi

3dB 3dBi

4dB 3dBi

4dB Integrated antenna

* All equivalent antennas and cables are suitable for use with the M2M-4. As above information. Remark: Lower gain antenna can also be used. Outdoor Antenna Indoor Antenna Maximum Gain Minimum Gain 3dBi

2dBi

1

a) CELLPHONE-MATE

LETTER OF ATTESTATION 3rd February, 2016 To Whom It May Concern, These statements aretrue. 1) Not applicable : Licensee consent for provider-specific booster has been obtained (consent to be made available upon FCC/TCB request) Yes : NPS and other compliance/safeguard features have been implemented Yes: NPS and other compliance/safeguard features are defaulted to be "On" (in operation) Yes: NPS and other compliance/safeguard features cannot be field reconfigured, disabled or removed Yes: Consumer booster is not user programmable, does not need fine tuning or adjustment, does not require professional installation Yes: Future software upgrade will not cause non-compliance. Sincerely, Print Name: Dennis Findley 9 YOUSYN Title: Tech Support manager Contact Telephone Number: 510-770-0469 ext. 228 Contact Emailaddress dennis@surecall.com

,4/ Sure Calli RAISE YOUR BARS 48346 Milmont Drive Fremont, CA 94538 Phone:510-770-0469 Fax: 510-996-7250 www. cellphone -mate.com

CELLPHONE-MATE*

~_ FCC Authorization 27th, June 2016 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To Whom It May Concern:

We, Cellphone-mate, the undersigned, hereby authorize CKC laboratories, Inc. to act on our behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by CKC Laboratories, Inc. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Ennis Findley Authorized Representative Contact number 510 770-0469 ext. 228 9SureCall RAISE YOUR BARS 48346 Milmont Drive Fremont, CA 94538 Phone: 510-770-0469 Fax: 510-996-7250 www.cellphone-mate.com

MSCL M2M-4 V1.0 Uplink center Frequency(MHz) MSCL(dB) Explanation:

781 3 836.5 3 1732.5 1882.5 4 4 Because the M2M device is directly connected to the router through the power box (with 7ft cable). Therefore, the MSCL of the M2M device is equal to the loss of the power box. Operation Frequency (MHz) Loss (dB) Power Box Loss(with 7ft cable) PCS(1850-1915) Cellular(824-849) LTE(776-787) AWS(1710-1755) 4 3 3 4

FCC Confidential Authorization 10th June, 2020 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: RSNLTE-V In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Cellphone-mate hereby requests long-

term confidential treatment of information accompanying this application as outlined below:

Schematics Block Diagram Operation Description Parts list The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Sincerely Yours, Dennis Findley Authorized Representative Cellphone-Mate Inc. 510 770-0469 ext. 228 48346 Milmont Drive Fremont, CA 94538 Phone: 510-770-0469 Fax: 510-996-7250 www.cellphone-mate.com 48346 Milmont Drive Fremont, CA 94538 Phone: 510-770-0469 Fax: 510-996-7250 www.cellphone-mate.com