CLIP STUDIO TABMATE
[ ]
/
CLIP STUDIO TABMATE CLIP STUDIO 3 ON/OFF1- 4 ON CLIP STUDIO PAINT OS Web CLIP STUDIO PAINT DEBUT Web http://www.clipstudio.net/promotion/tabmate/
Web CLIP STUDIO TABMATE Web https://www.clip-studio.com/clip_site/support/clipstudiotabmate/
. CLIP STUDIO PAINT DEBUT Web https://www.clip-studio.com/clip_site/support/clipstudiopaint/
https://www.celsys.co.jp CELSYS,Inc.
:
CES-50006 TEL
:
:
TEL 2.4GHz 6 1. Web http://www.clip-studio.com/clip_site/support/clipstudiotabmate/
2.
[CLIP STUDIO TABMATE ]
3. 1. 2. 1. 2. 6
:
CELSYSCLIP STUDIO CLIP STUDIO PAINT Microsoft Windows Microsoft Corporation Mac macOS Apple Computer, Inc. Bluetooth Bluetooth SIG,Inc. CLIP STUDIO TABMATE Using a pen tablet has become easier than ever! This wireless controller can be congured with over 200 CLIP STUDIO PAINT features!
Instructions Thank you for purchasing this product from CELSYS. About CLIP STUDIO TABMATE Press and hold the " (CLIP STUDIO)" button on the unit for three seconds or more to turn the power on and o. Press the " (CLIP STUDIO)" normally to switch between modes (1 - 4). The pairing search starts automatically when the power is turned on. See the TABMATE webpage below for details on connecting to your computer (pairing), button congurations, button layout, operation instructions and compatibility with the latest operating systems. This product also includes a serial number for CLIP STUDIO PAINT DEBUT. To download this software, follow the instructions on the TABMATE webpage. TABMATE webpage http://www.clipstudio.net/en/promotion/tabmate/
Inquiries Webpagehttps://www2.celsys.co.jp/support/service_en/service.html For Your Safety WARNING The following actions are prohibited. These actions may result in fire, electric shock or other accidents or injuries. Do not scratch, modify, forcibly bend, twist or pull on this product. Do not disassemble or customize this product. Do not use this product for equipment on which people's lives directly depend, such as medical devices or precision devices; devices responsible for people's safety; equipment where a malfunction could have a serious impact, such as critical computer systems; or other systems where a high level of reliability is required. Do not use this product in areas where the use of electronic devices or devices emitting radio waves is prohibited (hospitals, aircraft, etc.). If any of the following situations occur, immediately stop using this product and remove the batteries. Otherwise, fire or electric shock may occur. If smoke, abnormal heat, a burning smell or other abnormal phenomenona occur. If water, other liquids (sweat, juice, etc.) or other foreign matter gets into the product. If a lightning storm is nearby. If this product is broken or subjected to impact such as dropping, bumping, etc. Do not use, install or leave this product in the following places. Otherwise, fire or electric shock may occur. Places with a lot of oil smoke or humidity, such as on a kitchen counter or next to a humidifier. Near hot equipment, or in or near direct sunlight. Places with a lot of moisture (near water, in a bathroom, outdoors in the rain or snow, etc.). CAUTION This product is a wireless device using the whole of the 2.4GHz band. Operations may be unstable if it is used near devices that produce a magnetic field, static electricity or radio interference. Turn off the device or keep this product away from it. A battery is included for the purpose of checking that this product works when using it for the first time. After confirming that this product works, replace this battery with a commercial battery. Remove and store the battery if this product will not be used for a long time. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Industry Canada statement This device complies with ISED s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence. L exploitation est autorise aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. FOR PORTABLE DEVICE USAGE (<20m from body/SAR needed) Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Dclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. FOR MOBILE DEVICE USAGE (>20cm/low power) Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. CELSYS, CLIP STUDIO and CLIP STUDIO PAINT are trademarks or registered trademarks of CELSYS, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries. Mac and macOS are trademarks or registered trademarks of Apple Computer, Inc. in the United States and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other company names and product names described herein are trademarks or registered trademarks of their respective holders. The specifications, price, design, etc. of this product may change without warning. CELSYS, Inc. https://www.celsys.co.jp/en/
CELSYS,Inc. CLIP STUDIO TABMATE(Model: CES-50006)