Thank you for choosing Smartpods product. Your choice is crucial for us,which means Smartpods has added a new user. Hope that we will bring you a good experience through our products and services. Also hope you will put forward the good advice and suggestions by official customer hotline, Weibo and Wechat in the process of product experience,which can help Smartpods to constantly improve product and service. If you encounter any problems in the using product, please refer to service process. Your support is our strongest power, also your recognition and evaluation are a great encouragement to Smartpods. Thank you!
Smartpods Overview Of Headset How To Use Power on: When taking two earbuds out of the case, earbuds will be powered on, pairing and connect the device How To Use Bluetooth Pairing Single earbud:
Charging station automatically, long press MFB for 4 seconds to power on earbuds when in 1. Take one earbud from the case, Long press the MFB until Red&Blue the shutdown condition. LED flashing when in the shutdown condition, and sound tip pairing . True wireless earbuds Power off: Put earbuds back to the case, earbuds will be powered off 2. Open the bluetooth of mobile phone, search Smart Pods and click automatically, or long press MFB for 4 seconds to to power off it to connect the mobile phone ( After sucessful connection, earbud is earbuds(red LED) when in the boot condition. blue LED flashing slowly and hear voice tip pairing sucessful LED INDICATOR Right and Left earbuds connection: In normal condition, the factory fault Pairing: Two earbuds will be connected, and red&blue LED flashing, right is the right and left earbud sucessful pairing. Right and left earbud connected) Charging cable Power on/off, MFB button Microphone LED Indicator earbud is blue LED flashing slowly. Connected: Blue LED flashs slowly. Incoming call: Blue LED flashs slowly. Talking: Blue LED flashs slowly. Music: Blue LED flashs slowly. need to be paired unless no connection. 1. Long press MFB for 6 seconds when in the shutdown condition,It is red&blue LED flashing, and voice tip is pairing. If pairing sucessfully, two earbuds are blue led flashing slowly, and voice tip is pairing sucessfully connected .After seconds, if one of the earbud becomes Music play/Stop: Short press MFB to suspend / play the music. red&blue LED flashing, and the voice tip is pairing, please open the Last song: Long press right MFB for 2 seconds Next song: Long press left MFB for 2 seconds Voice assistant: Double click right and left MFB Last number redial: Three clicks right and left MFB mobile phones or other devices, and search smart pods and connect them. If connected secessfully, earbud is blue LED flashing, and the voice tip is pairing sucessfully second device is connected. 2. After earbud out of power or power off, earbud will connect to the last Manual pairing: Long press MFB for 6 seconds when in the shutdown mobile phone automatically when we charging it and power on. condition. 3. If connected with mobile phones ago and cancelled all history on mobile phone, press two earbuds at the same time until blue LED flash slowly, the main earbud will be red&blue LED flashing, and open the bluetooth of mobile phone and connect. How To Charge Bluetooth Earphone Specification Common question and solution Bluetooth Version: V5.0 Bluetooth Protocol: HSP, HFP, A2DP, AVRCP Standby time: 60H Talking time: 4H Music play time: 2.5H Charging time: 1.5H Charging Voltage: DC 5V Working Frequency: 2.402G-2.480G Environment Temperature: -20/+60 Transmission Distance: 10m Earbud battery capacity: 45mAh/3.7V Drive Specification Driver unit: 8mm Sensitivity: 9 Impendence:
Frequency Range:
Questions Reasons Solutions NO POWER ON NO CHARGING Exhaustion of battery power Charged in the case(and charged by mobile phones around 5 mintues more) Press time is short Long press MFB for 3 seconds The charging plug is not plugged in properly Place the plug well again Earbuds are not in the pairing condition until red&blue LED flash NO FOUND OR FAILURE PAIRING BAD TALKING SOUND QUALITY Earbuds are in the search condition Let earbuds in the search condition of the mobile phone Application Error of Mobile Bluetooth Close the bluetooth of the mobile phone and then open bluetooth again Battery capacity is low Charge earbuds Bluetooth signal has interference Do not apply in noisy environments or where electromagnetic waves are dense FCC Warnning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. User Manual Smart Pods True Wireless Earbuds How To Charge Charging Earbuds Charging:
1. In chariging, the red LED will flash. In full charging, or power is enough, the red LED will change to be blue LED (About 1.5 hours charging, earbuds could be charged fully, standards as LED indicators) 2. If the red LED flashs when connection, earbuds battery is low. If go on working, earbuds will be powered off automatically, so please charge earbuds timely.(Put earbuds back to the case to charge) 3. Earbuds have smart magnet charging, earbuds can be charged automatically when put earbud back to the case.(If red LED doesnt flash, please place earbuds again) 4. After full charging, earbuds can provide talking time for about 3-4 hours, standby time for 100-150hours. For real talking time and standby time, it depends on different connection of mobile