Low Frequency Monitor ITK-340 900 MHz and Wi-Fi enabled Quick installation with convenient wall mounting bracket Can be configured and monitored by central server for superior control Battery-operated for plug-an-play installation no wiring necessary 2+ years battery life in egress detection mode (less than 1 second update speed) 10+ years battery life in location presence mode (1 minute updates) The Low Frequency (LF) Monitor is a signaling unit used with LF-
enabled tags to segment zones or designate egress points. The LF Monitors create a detection sphere. When a tag enters the LF Monitor sphere, the tags LF sensor is triggered and the tag immediately reports this event to the CenTrak Location Engine. The LF Monitors are typically used to segment zones/areas and for egress detection. The LF Monitors may be strategically placed on the floor to define zonal areas. When a tag passes the LF Monitor, the system knows it passed from one zone to another zone. In the same manner, the LF Monitors may be placed in elevator banks and stairwells to determine if a tag passed from one floor to another. An additional use for the LF Monitors involves attaching the devices under beds and/or chairs to enable bed-/chair-level location accuracy. The battery operation and the extremely simple mounting mechanism, allow for the quick and low cost installation. ITK-340 Low Frequency Monitor ITA-790 Low Frequency Monitor Mounting Bracket CenTrak, Inc. 5 Caufield Place, Suite 102 Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com CenTrak 2012. All Rights Reserved. Proprietary and Confidential. 7/12 Low Frequency Monitor ITK-340 Technical Specifications Operation FCC Operating Frequency Range Reach Low range Medium range Long range Enclosure Length Width Height Weight Mounting 2.4 - 2.5 GHz 902-928 MHz 125 KHz Up to 4 ft. (battery operated) Up to 8 ft. (battery operated) Up to 15 ft. (power adapter) 7.38 in (186 mm) 4.75 in (120 mm) 1.9 in (49 mm) 11.87 oz (.34 kg) without batteries Wall mounting bracket Monitor Mounting Plate ITA-790 Environmental Operating Temperature 0 C to +50 C Storage temperature
-20 C to +70 C Operating Humidity 10-90%, non-condensing ITK-340 Low Frequency Monitor ITA-790 Low Frequency Monitor Mounting Bracket Power Battery type Pre-installed Lithium D Cell (4) CenTrak, Inc. 5 Caufield Place, Suite 102 Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com This component complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cases undesired operation. Modifying or tampering with the transceivers or receivers internal components can cause a malfunction, invalidate the warranty, and will void FCC authorization to use these products. This product or its systems are covered by one or more of the following U.S. patents: 5,917,425, 7,061,428, 7,378,964, 7,619,532 L utilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. CenTrak 2012. All Rights Reserved. Proprietary and Confidential. 7/12