ITD-763 & ITD-763E CenTrak Staff Tags ITA-766 Suspender Clip for Staff Tag ITD-763 & ITD-763E Multi-Mode Staff Tag A smarter approach to RTLS. CenTraks ITD-763 and ITD-
763E adapt to your accuracy requirements (zone, room, bed) and RF environment to maximize staff locating initiatives. Wi-Fi and Gen2IR enabled Leverages existing 802.11 networks for RF locating Provides certainty-based room-level accuracy using CenTraks proven battery operated Gen2IR Monitors. Hole mounts for portrait or landscape to wear behind a standard badge Water resistant and easy to clean Three customizable buttons Low Frequency (LF) sensor (only Model ITD-763E) Used with CenTraks Low Frequency Monitors to create choke points. CenTraks Multi-Mode Staff Tags are easily worn by staff members that need to be located and identified. The tags can be located using existing Wi-Fi network infrastructure. Multi-Mode tags can be rapidly deployed without additional infrastructure. Battery operated Gen2IR components can be added in the future to areas that require greater performance and accuracy (such as for high acuity clinical workflow). Maintenance and management is easy. CenTraks ITD-763 and ITD-763E tags offer extreme battery life, are fully configurable in the field and allow for wireless upgrades and profile modifications onsite. CenTrak, Inc. 5 Caufield Place, Suite 102 Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com CenTrak 2012. All Rights Reserved. Proprietary and Confidential. 5/12 ITD-763 & ITD-763E Multi-Mode Staff Tag Technical Specifications Operation Operating Frequency (Wi-Fi) 802.11 b/g Operating Frequency (Secondary) 902-928 MHz Configurable buttons YES, 3 configurable buttons LED indicator Motion sensor Gen2IR sensor YES YES YES Low Frequency sensor 125 KHz (only Model ITD-763E) Battery Replacement YES, single screw Audible alarms Tag Attachment Tag Dimensions Case Length Case Height Case Width YES YES, designed to be worn behind standard staff ID badges 3.6 in (92 mm) 2.5 in (63 mm) 0.2 to 0.4 in (3-7 mm) ITD-763 & ITD-763E CenTrak Staff Tags ITA-766 Suspender Clip for Staff Tag Case Weight (with battery) 1.9 oz (53 g) Construction ABS & Poly Carbonate Mixture Environmental Operating Temperature (Tag)
-10 C to +75 C Storage Temperature (Tag)
-25 C to +75 C (for best battery life store at room temperature or below) Sealing Power Splash resistant Battery Type 1/10 D 3.6V (replaceable) Smart tag Feature Remaining battery life notifications CenTrak, Inc. 5 Caufield Place, Suite 102 Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com This component complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cases undesired operation. Modifying or tampering with the transceivers or receivers internal components can cause a malfunction, invalidate the warranty, and will void FCC authorization to use these products. This product or its systems are covered by one or more of the following U.S. patents: 5,917,425, 7,061,428, 7,378,964, 7,619,532. L utilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. CenTrak 2012. All Rights Reserved. Proprietary and Confidential. 5/12