www.glo-e.com For Questions and Comments please call:
Cc 1800 225 9319 WARNING:
All rubber bands and wire ties, as well as Complies with tags, are not parts of this toy,and should Toy Safety be discarded for your child's safety. Colors Standard and contents may vary from those shown ASTM F963 on package. LICENSED BY \\ |
e@- glo@. TouTur eooUcTs COLOR \
KINETICS 2005 Cepia LLC. Saint Louis Missouri 63124 Made in China U.S.and foreign patents pending glo-e MAGIC WAND TO OPERATE THE met AN FOR CLEANING; SPOT CLEAN ONLY TURN ON THE PLUSH, REMOVE THE BATTERY CASE FROM THE BATTERY POUCH. SLIDE THE og SWITCH TO THE ON POSITION. REINSERT THE BATTERY BOX INTO THE POUCH, 1. REMOVE PULL TAB ON WAND 2. PUSH BUTTON ON WAND TO REMOTELY ACTIVATE THE SWITCH ON PLUSH MAGICALLY TURN ON THE PLUSH AND SWITCH FROM LIGHT SHOW TO LIGHT AFTER THE SHOW THE PLUSH WILL TURN OFF. THE LIGHT IN THE WAND WILL TURN OFF AFTER A FEW SECONDS. www.glo-e.com Printed in China 274mm SHOW WITH EACH PUSH OF THE BUTTON. BATTERY INFORMATION TO REPLACE THE BATTERIES, REMOVE THE SMALL SCREW FROM THE BACK OF THE WAND. REMOVE THE END CAP. REPLACE THE BATTERIES WITH 2 FRESH CR2032 BATTERIES. Always replace used batteries with fresh Lithium batteries. Do not mix old batteries with new, do not mix Alkaline with standard carbonzinc or rechargeable nickel cadmium batteries.
N lo( =).
(OMT UP MCoUCTS This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1} this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Thecchanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To comply with the FCC AF exposure compliance requirements, this device and its antenna must not be co-located or operating fo conjunction with any other antenna or transmitter. LICENSED BY wd >
2, glo. sehen 2005 Cepia LLC. Saint Louis Missouri 63124 U.S.and foreign patents pending