Chaam Tech User Manual Model No. COP-170HB 17inches High Bright TFT-LCD LCD Monitor
- Chaam Tech High Bright TFT LCD Panel
- High performance up-Scaling characteristic
- Automatic Scanning
- Wide Viewing Angle, High Speed Response
- Enhanced Video Quality
- Slim Type Design
- Test Pattern for Burn-in & Self Check Model No. :COP170HB Engineering Specification Page: 1of 11 Approval No.:17-SS Revision No.:1.1 Issue Date: Aug.19.2004 FCC RF INTERFERENCE STATEMENT NOTE :
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio, TV technical for help. Only shielded interface cable should be used. Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment, Chaam Tech Table of Contents 1. GENERAL DESCRIPTION 1-1. Overview 1-2. Quick reference table of Characteristics 2. USER CONTROL & OSD 2-1. Key Control Board 2-2. Key Name and Function 2-3. OSD Adjustment 2-4. OSD Menu Screen 3. CONNECTOR PIN DESCRIPTIONS 3-1. DC Input 3-2. DVI-D Input (Option Available) 3-3. S-Video Input (Option Available) 3-4. CVBS Input (Option Available) 3-5. Analog RGB Input 3-6. Output to Key Control 4. STANDARD DISPLAY MODE 5. MECHANICAL STRUCTURE Model No. :COP170HB Engineering Specification Page: 2of 11 Approval No.:17-SS Revision No.:1.1 Issue Date: Aug.19.2004 Chaam Tech 1. GENERAL DESCRIPTION 1-1. Overview Chaam Tech open frame LCD Monitor COP-170HB is a high performance TFT LCD monitor providing high quality image from the analog RGB, DVI-D, composite VIDEO and S-videoinput. This monitor supports wide range signal input from VGA to SXGA resolution at vertical refresh rate of 60 to 75Hz. It includes integrated signal processing unit, named LSP(LCD Signal Processor), which had all electronic function for user application. It is designed for industrial use with Auto power on, up scaling performance adequate for low-
resolution application and enhanced design margin for reliability 1-2. Quick reference table of Characteristics Size 17 Diagonal Active Display Area 337.9x270.3 mm Type No. Chaam Tech OP170BK,OP170WH Number of Pixels 1280 (H) x 1024 (V) Pixel Arrangement RGB Vertical Stripe Pixel Pitch Color Depth 0.264mm x 0.264mm 16.7M True Color Surface Treatments Hard Coating (3H),Haze 44%
Viewing Angle
(CR10) 170BK(L,R,H,L)--- 89/89/89/89 170WH(L,R,H,L)--- 75/75/75/60 Contrast Ratio Typ. 500:1 Response Time(Typ.) Rise time(tr) :15ms/10ms (170BK/170WH) Rise time(tr) :10ms/ 3ms (170BK/170WH) Average Brightness Typ. 170BK-750cd/ , 170WH-1,000cd/
Frame Rate Typ. 60Hz , Max. 70Hz Panel Dimension(WHD) 170BK : 358.5 x 296.5 x 24.80mm 170WH : 358.5 x 296.5 x 24.80mm CCFL 12Lamp Panel
(Chaam Tech) Model No. :COP170HB Engineering Specification Page: 3of 11 Approval No.:17-SS Revision No.:1.1 Issue Date: Aug.19.2004 Chaam Tech ITEM Input Signal Resolution DESCRIPTION REMARKS Analog RGB DVI-D Composite Video & S-Video DC 15V/4.5A Option Available Option Available Hor : 15 to 80 KHz Ver : 50 to 77 Hz Analog RGB : VGA/SVGA/XGA/WXGA/SXGA DVI-D : VGA/SVGA/XGA/WXGA/SXGA CVBS & S-VIDEO : NTSC/PAL/SECAM Special timing available 1280 X 1024 @ 75Hz Max 1280 X 1024 @ 60Hz Max Regulation (Safety , Ergonomics , EMC) Receptacle Environmental Conditions DC Power Jack, D-SUB, DVI-D, VHS, SVHS Operating : Temperature : 10 to 50 / Humidity : 8 to 80%
Storage : Temperature : -20 to 60 / Humidity : 5 to 90%
Demonstrated MTBF More than 20,000 hours Power AC Input (Universal) Max. Power dissipation Adapter Rating Input Signal Description DC input 15Pin D-Sub DC Voltage Power Consumption Video (SOG) Sync Voltage Horizontal Frequency Vertical Frequency DVI-D Digital RGB Dot Clock CVBS Video + Sync S-VHS LUMA Signal Input CHROMA Signal Input Unit Vdc Watts Vp-p Vp-p kHz Hz mVp-p mVdc MHz Vp-p Vp-p Vp-p AC100~240V @60/50Hz 60W atts 15V 4.5A Min Typical Max Remarks 15 45 0.714(1.0) 5.0 64 75 1.0 12 43 15 50 150 150 25 0.339 0.339 for full Option 75Terminated Depends on Mode Depends on Mode 18 50 80 77 1560 1260 130 Depends on Mode 0.961 0.961 Model No. :COP170HB Engineering Specification Page: 4of 11 Approval No.:17-SS Revision No.:1.1 Issue Date: Aug.19.2004 Chaam Tech 2. USER CONTROL & OSD 2-1. Key Control Board Model No. :COP170HB Engineering Specification Page: 5of 11 Approval No.:17-SS Revision No.:1.1 Issue Date: Aug.19.2004 Chaam Tech 2.2 Key Name and Function Key Name Power Menu set Description Turns ON/OFF the system Activates the OSD menu or goes to previous menu
-When the OSD menu is off, press more than 3 seconds
: Performs "Auto-adjustment" function
-When the OSD menu is on
: Selects the highlighted icon that user wants Down Moves the highlight icon up to the function that user wants up
Source IR Moves the highlight icon down to the function that user wants Decreases the adjustment of the selected function Increases the adjustment of the selected function Selects the Input Signal among analog RGB, Digital DVI, CVBS and S-VHS Receives the signal from Remote Control Accessing the menu system 1.With the OSD off, push the Menu button to activate the main OSD menu. 2. Use the Up or Down buttons to move from one function to another. As you move from one icon to another, the function name changes to reflect the function or group of functions represented by that icon. Please refer to the following clause on the next page to view a complete list of all of the functions available for the driver board. 3. Press the Set button once to activate the highlighted function, use the Up or Down buttons to select the functions 4. After selecting a function, use the - or + buttons to make optimum adjustments. The setting bar moves and the numeric value indicator changes to reflect your adjustments. NOTE: The numeric value indicator is provided as a point of reference only and has nothing to do with a real measurement. 5. Press the Menu button once to return to the main menu to select another function or press twice to exit from the OSD. Model No. :COP170HB Engineering Specification Page: 6of 11 Approval No.:17-SS Revision No.:1.1 Issue Date: Aug.19.2004 Chaam Tech 2.3 OSD Adjustment menus Sub - menus Function DescriPtions Adjustment(PC) Adjustment is used to fine tune and get the best image by removing noises that creates unstable images with jitters and Shimmers. Adjustment(DVI) This function is active if you select a digital DVI source Adjustment(Video) This function is active if you select an input source other than PC.(DVD,VCR) Color The color can be changed from redish to bluish white. Setup Setup is used to adjust OSD menu information and image. Brightness Adjusts the brightness of video. Contrast Adjusts the contrast of video. Clock Phase Auto Adjust Removes the noises. When frequency value is wrong, the image has horizontal lines especially in 1 dot on and off. Removes the noises. When phase value is wrong, the image has vertical lines especially in 1 dot on and off
"Auto adjustment" allows the monitor to self-adjust to the incoming video signal. The value of phase, frequency and position are adjusted automatically. Contrast Adjusts the contrast of image. Brightness Adjusts the brightness of image. Brightness Adjusts the brightness of video. Contrast Adjusts the contrast of video. Color Tint Changes the richness of color. Changes the tone of color. Sharpness Adjusts the sharpness of video image. 6500K 9300K User Image OSD Redish white. Bluish white. User customizable.
-H Position : Adjusts the horizontal position of the image.
-V Position : Adjusts the vertical position of the image.
-GAMMA : Bypass
-Information : Displays current display mode.
-Language : English, Germany, French, Italy, Spanish.
-Color : Changes the opaqueness of the OSD background.
-Position : Moves the OSD Window.
-Duration : Indicates time until the OSD Menu will disappear after adjusting the menu.
-OSD Lock : Avoids OSD control except HOT key. Mode Recall Changes the image information to factory outgoing status. Backlight Auto sleep Changes the brightness of image by controlling the backlight of panel. Goes to soft power off after 10 minutes when input cable is disconnected. Model No. :COP170HB Engineering Specification Page: 7of 11 Approval No.:17-SS Revision No.:1.1 Issue Date: Aug.19.2004 Chaam Tech 2-4. OSD Menu Screen Model No. :COP170HB Engineering Specification Page: 8of 11 Approval No.:17-SS Revision No.:1.1 Issue Date: Aug.19.2004 Chaam Tech 3. CONNECTOR PIN DESCRIPTIONS 3-1. DC Input Part No. DJ023 Pin No. 1 2 3 Description Vcc(15V/4.5A) GND GND 3-2. DVI-D Input (Option Available) Part No. Pin No. SD74320-003
(MOLEX) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Description TMDS DATA 2-
TMDS DATA 2+
TMDS DATA 2/4 Shield TMDS DATA 4- (NC) TMDS DATA 4+ (NC) DDC Clock DDC Data NC TMDS DATA 1-
TMDS DATA 1+
TMDS DATA 1/3 Shield TMDS DATA 3- (NC) TMDS DATA 3+ (NC) 5V GND Hot Plug Detect TMDS DATA 0-
TMDS DATA 0+
TMDS DATA 0/5 Shield TMDS DATA 5- (NC) TMDS DATA 5+ (NC) TMDS DATA Clock Shield TMDS Clock+
TMDS Clock-
3-3. S-Video Input (Option Available) Part No. DJ-M404 Pin No. 1 2 3 4 5 Description GND GND CHROMA LUMA GND Remarks Remarks Remarks Model No. :COP170HB Engineering Specification Page: 9of 11 Approval No.:17-SS Revision No.:1.1 Issue Date: Aug.19.2004 Chaam Tech 3-4. CVBS Input (Option Available) Part No. DC003Y 3-5. Analog RGB Input Part No. DB15HD Pin No. 1 2 3 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3-6. Output to Key Control Part No. Pin No. 12505WR15P
(Yeonho) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description Composite Video GND GND Description RED GREEN BLUE GND GND (DDC RETURN) GND-RED GND-GREEN GND-BLUE NC GND-SYNC/SELF TEST GND DDC DATA HORIZONTAL SYNC VERTICAL SYNC DDC CLOCK Description 5V POWER MENU SET DOWN UP MINUS PLUS SOURCE LED NC IR GND GND GND Remarks Remarks Remarks Option Model No. :COP170HB Engineering Specification Page: 10of 11 Approval No.:17-SS Revision No.:1.1 Issue Date: Aug.19.2004 Chaam Tech 4. STANDARD DISPLAY MODE 640x480
@60Hz 720x400
@70Hz 640x350
@70Hz Timing Item Resolution Pixel Clock (MHz) 25.175 28.324 25.175 640x480
@75Hz 31.500 800x600
@60Hz 40.000 800x600
@75Hz 49.500 Sync Polarity(H/V) P/N N/P N/N N/N P/P P/P 1024x768
@60Hz 65.000 N/N Scaning Type Progressive Progressive Progressive Progressive Progressive Progressive Progressive 46.875 21.333 16.162 0.323 1.616 3.232 48.363 20.677 15.754 0.369 2.092 2.462 75.000 13.333 12.800 0.021 0.064 0.448 60.004 16.666 15.880 0.062 0.124 0.600
-Hor Frequency(kHz)
-Period(us)
-Active time(us)
-Front porch(us)
-Sync width(us)
-Back porch(us)
-VerFrequency(Hz)
-Period(ms)
-Active time(ms)
-Front porch(ms)
-Sync width(ms)
-Back porch(ms) 31.468 31.778 25.418 0.638 3.823 1.909 70.090 14.268 11.122 0.381 0.064 1.111 31.469 31.780 25.420 0.640 3.810 1.906 70.082 14.270 12.710 0.413 0.064 1.080 31.469 31.778 25.422 0.636 3.813 1.907 59.940 16.683 15.253 0.064 0.064 0.794 37.500 26.667 20.317 0.508 2.032 3.810 75.000 13.333 12.800 0.027 0.080 0.427 37.879 26.400 20.000 1.000 3.200 2.200 60.317 16.579 15.840 0.026 0.106 0.626 Resolution Timing Item 1024x768
@75Hz Pixel Clock (MHz) 78.750 Sync Polarity(H/V) P/P 1280x1024 1280x1024
@60Hz 108.50 P/P
@75Hz 135.00 P/P 1152x864
@60Hz 1152x864
@75Hz 80.000 108.00 P/P P/P Scaning Type Progressive Progressive Progressive Progressive Progressive
-Hor Frequency(kHz)
-Period(us)
-Active time(us)
-Front porch(us)
-Sync width(us)
-Back porch(us)
-VerFrequency(Hz)
-Period(ms)
-Active time(ms)
-Front porch(ms)
-Sync width(ms)
-Back porch(ms) 60.023 16.660 13.003 0.203 1.219 2.235 75.029 13.328 12.795 0.017 0.050 0.466 63.974 15.631 11.797 0.590 1.180 2.065 60.013 16.663 16.006 0.016 0.047 0.594 79.976 12.504 9.481 0.119 1.067 1.837 75.025 13.329 12.804 0.013 0.038 0.475 54.348 18.400 14.400 0.400 1.200 2.400 60.053 16.652 15.898 0.017 0.055 0.681 67.500 14.815 10.667 0.593 1.185 2.370 75.029 13.333 12.800 0.015 0.044 0.474 Model No. :COP170HB Engineering Specification Page: 11of 11 Approval No.:17-SS Revision No.:1.1 Issue Date: Aug.19.2004