all | frequencies |
|
|
|
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|---|---|---|
manuals | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
114-5907-000 PROOF1 06.19.23 Part1 | Users Manual | 4.83 MiB | July 19 2023 / January 14 2024 | delayed release | ||
1 2 |
|
114-5907-000 PROOF1 06.19.23 Part2 | Users Manual | 4.45 MiB | July 19 2023 / January 14 2024 | delayed release | ||
1 2 |
|
Internal Photos | Internal Photos | 388.45 KiB | July 19 2023 / January 14 2024 | delayed release | ||
1 2 |
|
External Photos | External Photos | 1.24 MiB | July 19 2023 / January 14 2024 | delayed release | ||
1 2 |
|
132-3454-000--universal | ID Label/Location Info | 183.53 KiB | July 19 2023 / July 21 2023 | |||
1 2 | ID Label/Location Info | July 19 2023 / July 21 2023 | ||||||
1 2 | ID Label/Location Info | July 19 2023 / July 21 2023 | ||||||
1 2 | ID Label/Location Info | July 19 2023 / July 21 2023 | ||||||
1 2 | ID Label/Location Info | July 19 2023 / July 21 2023 | ||||||
1 2 | 003-0350-1 BOM | Parts List/Tune Up Info | July 19 2023 | confidential | ||||
1 2 | 003-0350-1 scematic | Schematics | July 19 2023 | confidential | ||||
1 2 | Cover Letter(s) | July 19 2023 / July 21 2023 | ||||||
1 2 | Cover Letter(s) | July 19 2023 / July 21 2023 | ||||||
1 2 | Cover Letter(s) | July 19 2023 / July 21 2023 | ||||||
1 2 | 8-11-RJOA Block diagram | Block Diagram | July 19 2023 | confidential | ||||
1 2 | 8-11-RJOA Theory of operation block diagram | Operational Description | July 19 2023 | confidential | ||||
1 2 | Test Report | July 19 2023 / July 21 2023 | ||||||
1 2 | Test Report | July 19 2023 / July 21 2023 | ||||||
1 2 | Attestation Statements | July 19 2023 / July 21 2023 | ||||||
1 2 | Attestation Statements | July 19 2023 / July 21 2023 | ||||||
1 2 | RF Exposure Info | July 19 2023 / July 21 2023 | ||||||
1 2 |
|
Test setup photos etr2202429-01 Realtek WiFi | Test Setup Photos | 819.95 KiB | July 19 2023 / January 14 2024 | delayed release | ||
1 2 | Test Report | July 19 2023 / July 21 2023 | ||||||
1 2 | Test Report | July 19 2023 / July 21 2023 | ||||||
1 2 | Test Report | July 19 2023 / July 21 2023 | ||||||
1 2 | Test Report | July 19 2023 / July 21 2023 | ||||||
1 2 | Test Report | July 19 2023 / July 21 2023 |
1 2 | 114-5907-000 PROOF1 06.19.23 Part1 | Users Manual | 4.83 MiB | July 19 2023 / January 14 2024 | delayed release |
Wall Mount Wi-Fi Garage Door Opener Models 98032 For Residential Use Install On Sectional Doors With Torsion Assemblies Only This product is intended for installation only by trained garage door technicians. This product may require adjustments to door springs and/or track configurations. This product is not intended for use on low headroom tracks with outside pick up drums or garage doors utilizing extension springs. Please read this manual and the enclosed safety materials carefully!
The door WILL NOT CLOSE unless the Protector System is connected and properly aligned. Periodic checks of the garage door opener are required to ensure safe operation. The model number is located on the front cover of the opener. This garage door opener is ONLY compatible with myQ and Security+2.0 accessories. Attach warning labels to the location indicated on label. Register your garage door opener to receive updates and offers from LiftMaster M S Take a photo of the camera icon including the points (
). Send it in by texting the photo to 71403
(US) or visit www.Liftmaster.photo
(Global) LiftMaster 300 Windsor Drive Oak Brook, IL 60523 Table of Contents PREPARATION 2 myQ Serial Number ...................................... 2 Safety Symbol and Signal Word Review ...... 2 Unattended Operation ................................... 2 Planning ........................................................ 3 Before You Connect with Your Smartphone 4 Preparing Your Garage Door ........................ 5 Tools Needed ................................................ 5 Carton Inventory ........................................... 6 Additional Items You May Need ................... 6 ASSEMBLY 7 Attach the Collar to the Garage Door Opener ..................................... 7 Attach Mounting Bracket to Garage Door Opener ..................................... 8 INSTALLATION 8 Position and Mount the Garage Door Opener ..................................... 9 Attach the Emergency Release Rope and Handle .................................................. 10 Preparation Install Automatic Door Lock ....................... 10 Install the Door Control
(Smart Control Panel) ............................... 11 Install myQ Remote LED Light ................... 12 Install the Protector System ...................... 13 Connect Power ............................................ 16 Align the Safety Reversing Sensors ........... 17 Install the Battery Backup ........................... 18 ADJUSTMENT 19 Identify Door Profile .................................... 19 Set Door Profile ........................................... 20 Program the Travel 21 Automatic Force Set Up .............................. 21 Test the Safety Reversal System ................ 22 Test the Protector System ......................... 22 Test the Power Door Lock .......................... 23 Test the Emergency Release ....................... 23 OPERATION 24 Using Your Garage Door Opener ................ 25 Connect with Your Smartphone ................. 26 Using the Door Control ............................... 27 PROGRAMMING 29 893MAX Remote Control ............................ 29 Program the myQ Remote LED Light ......... 30 To Erase the Memory .................................. 30 HomeLink .................................................. 31 MAINTENANCE 32 Care of Your Garage Door Opener .............. 32 TROUBLESHOOTING 33 Diagnostic Chart .......................................... 33 Additional Troubleshooting ......................... 34 36 REPAIR PARTS Installation Parts ......................................... 36 Garage Door Opener Assembly Parts ......... 37 37 CONTACT INFORMATION 38 ACCESSORIES 39 WARRANTY Automatic Garage Door Opener Safety & Maintenance Guide 40 myQ Serial Number Write down the following information for future reference:
myQ Serial Number:
Product Serial Number:
Date of Purchase:
Serial Numbers Safety Symbol and Signal Word Review This garage door opener has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in strict accordance with the instructions and warnings contained in this manual. When you see these Safety Symbols and Signal Words on the following pages, they will alert you to the possibility of serious injury or death if you do not comply with the warnings that accompany them. The hazard may come from something mechanical or from electric shock. Read the warnings carefully. When you see this Signal Word on the following pages, it will alert you to the possibility of damage to your garage door and/or the garage door opener if you do not comply with the cautionary statements that accompany it. Read them carefully. Mechanical Electrical WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Unattended Operation The Timer-to-Close (TTC) feature, the myQ Smartphone Control app, and myQ Garage Door and Gate Monitor are examples of unattended close and are to be used ONLY with sectional doors. Any device or feature that allows the door to close without being in the line of sight of the door is considered unattended close. The Timer-to-Close (TTC) feature, the myQ Smartphone Control, and any other myQ devices are to be used ONLY with sectional doors. myQ Remote LED Light must be installed to enable use of Timer To Close or myQ Smartphone Control of the door. 2 Preparation Planning Survey your area to see if any of the conditions below apply to your installation. Take note of the drum sizes to make sure they are correct. Depending on your requirements, additional materials may be required. THIS DOOR OPENER IS COMPATIBLE WITH:
Doors that use a torsion bar and springs. The torsion bar must be 1" (2.5 cm) diameter. NOT compatible with reverse wound drums. Standard lift sectional doors using 4-6" (10-15 cm) diameter drums. 4-6" (10-15 cm) straight drums, doors no less than 400 lbs. High lift (up to 84" [214.4 cm] high) and standard lift sectional doors up to 14 ft.
(4.3 m) high. High lift sectional doors using 8" (20 cm) diameter taper drum. Vertical lift sectional doors using 8" (20 cm) diameter full taper drums. NOTE: Inspect the torsion bar while the door is raised and lowered. It is important that there is no noticeable movement up and down or left and right. If the movement is not corrected, the life of the garage door opener will be greatly reduced. Doors up to 18 ft. (5.5 m) wide. Review or inspect proposed installation area. The door opener can be installed on the left or right side of door. Select the side that meets the requirements listed below. Must have minimum of 2.5" (6.4 cm) between the wall and the center of the torsion bar. Must have minimum of 3" (7.6 cm) between the ceiling and the center of torsion bar. e 8.5"
c
(21.6cm) d Torsion bar Wall or obstruction b 3"
(7.6 cm) a 2.5"
(6.4 cm) Torsion bar Door spring myQ Remote LED Light a. b. c. d. e. f. g. h. Automatic door lock Safety reversing sensor Must have minimum of 8.5" (21.6cm) between the side wall (or obstruction) and the end of torsion bar. The torsion bar must extend at least 1.5" (3.81 cm) past the bearing. This may vary depending on your installation requirements. An electric outlet is required within 6ft. (1.83 m) of the installation area. If outlet does not exist, contact a qualified electrician. Depending upon building construction, extension brackets or wood blocks may be needed to install safety reversing sensors and cable tension monitor. Alternate floor mounting of the safety reversing sensors will require hardware (not provided). Check the seal on the bottom of the door. Any gap between the floor and the bottom of the door must not exceed 1/4 inch (6 mm). Otherwise, the safety reversal system may not work properly. g f h 3 Preparation Before You Connect with Your Smartphone Monitor and control your garage door from anywhere using the myQ app. BEFORE YOU BEGIN:
You will need:
Wi-Fi enabled smartphone, tablet or laptop Broadband Internet Connection Wi-Fi signal in the garage (2.4 Ghz, 802.11b/g/n required) Password for your home network (router's main account, not guest network) TEST THE WI-FI SIGNAL STRENGTH Make sure your mobile device is connected to your Wi-Fi network. Hold your mobile device in the place where your garage door opener will be installed and check the Wi-Fi signal strength. Check Signal Strength. If you see:
Wi-Fi signal is strong. The garage door opener will connect to your Wi-Fi network. Wi-Fi signal is weak. The garage door opener may connect to your Wi-Fi network. If not, try one of the options below to improve the Wi-Fi signal:
No Wi-Fi signal. The garage door opener will not be able to connect to your Wi-Fi network. Try one of the options below to improve the Wi-Fi signal:
Move your router closer to the garage door opener to minimize interference from walls and other objects Buy a Wi-Fi range extender For compatible router specifications and help, visit www.LiftMaster.com/Customer-Support. See page 26 to connect the garage door opener to a mobile device. 4 Preparation Preparing Your Garage Door BEFORE YOU BEGIN:
Disable locks. Remove any ropes connected to the garage door. Complete the following test to make sure the garage door is balanced and is not sticking or binding:
1. 2. 3. Lift the door halfway up. Release the door. If balanced, it should stay in place, supported entirely by its springs. Raise and lower the door to check for binding or sticking. A properly balanced door should NOT open or fall rapidly. If your door binds, sticks, or is out of balance, call a trained door systems technician. To prevent possible SERIOUS INJURY or DEATH:
ALWAYS call a trained door systems technician if garage door binds, sticks, or is out of balance. An unbalanced garage door may NOT reverse when required. NEVER try to loosen, move or adjust garage door, door springs, cables, pulleys, brackets or their hardware, ALL of which are under EXTREME tension. Disable ALL locks and remove ALL ropes connected to garage door BEFORE installing and operating garage door opener to avoid entanglement. This opener system is equipped with an unattended operation feature. The door could move unexpectedly. NO ONE SHOULD CROSS THE PATH OF THE MOVING DOOR. To prevent damage to garage door and opener:
ALWAYS disable locks BEFORE installing and operating the opener. ONLY operate garage door opener at 120V, 60Hz to avoid malfunction and damage. SPECIFICATIONS Volts . 120 Vac - 60 Hz, ONLY Current . 1.5 AMP LED Light Current (independently powered) . 0.2 AMPS Sectional Door Tools Needed During assembly, installation and adjustment of the garage door opener, instructions will call for hand tools as illustrated below. Drill Tape Measure 5/32", 3/16", 5/16"
and 3/4" Drill Bits Level Wire Cutters Pliers Screwdriver Claw Hammer Pencil Stepladder 1/4", 5/16", 9/16, and 3/8" 8-point Sockets and Wrench with 6" Extension Adjustable End Wrench 5 Torque Meter
(not shown) Needle Nose Pliers Preparation Carton Inventory If anything is missing, carefully check the packing material. Automatic Garage Door Lock Model 841LM with 2-Conductor White and White/Black Bell Wire with Connector NOTE: Older model 24V door locks are incompatible Mounting Bracket Garage Door Opener 2 Conductor Bell Wire White and White/Red The Protector System
(2) Safety Reversing Sensors
(1 Sending Sensor [short wire]
and 1 Receiving Sensor) with 2-Conductor White and White/Black Bell Wire attached Collar with Set Screws and Collar Key Safety Labels and Literature Safety Reversing Sensor Bracket (2) Battery Model 485LM (2) with Jumper Wire INCLUDED ACCESSORIES Smart Control Panel Model 880LMW 3-Button Premium Remote Control Model 893MAX (1) Remote Control Visor Clip myQ Remote LED Light Model 827LM
(Garage Door Opener Light) with Hardware Bag HARDWARE Screw #10-32 (2) Screw 14-10x2" (2) Handle Rope Screw 1/4"-20x1/2" (2) Screw 6ABx1-1/4" (2) Drywall Anchor (2) Screw 6-32x1" (2) Carriage Bolt 1/4"-20x1/2" (2) Wing Nut 1/4"-20 (2) REMOTE LIGHT HARDWARE:
myQ Remote LED Light Model 827LM Drywall Anchor (Screw-In) (2) Screw #6x1" (2) Additional Items You May Need Extension brackets (Model 041A5281-1) or wood blocks: Depending upon garage construction, extension brackets or wood blocks may be needed to install the safety reversing sensor. Fastening hardware: Alternate floor mounting of the safety reversing sensor will require hardware not provided. 6 90 connector for cable conduit or flex cable adapter: Required for permanent wiring. Assembly 1 Attach the Collar to the Garage Door Opener To avoid installation difficulties, do not run the garage door garage door opener until instructed to do so. The garage door opener can be installed on either side of the door (see Planning section page 3). The illustrations shown are for installation on the left side. 1. 2. 3. 4. Loosen the set screws on the collar. Ensure that the lock nuts are fully loosened. Attach the collar to the garage door opener output shaft. Ensure the collar is seated all the way on the motor shaft until it reaches the stop. Position the collar so the screws align with two of the holes in the output shaft. These screws should be easily accessible when the operator is attached to the torsion bar. Carefully tighten the two square head set screws closest to the operator. Turn the screws until they are hand tight, ensuring that the tips of the screws are properly lined up with the holes in the shaft. NOTE: It is important to ensure the tips of the screws are properly aligned with the corresponding holes in the shaft. Motor Shaft Collar To prevent possible SERIOUS INJURY or DEATH, the collar MUST be properly tightened. The door may NOT reverse correctly or limits may be lost due to collar slip. Set Screws 7 Assembly 2 1. Attach Mounting Bracket to Garage Door Opener Loosely attach slotted side of mounting bracket to the same side of the garage door opener as the collar, using screws provided. NOTE: Do not tighten screws until instructed. HARDWARE Screw
#10-32 (2) Socket Wrench Installation IMPORTANT INSTALLATION INSTRUCTIONS To reduce the risk of SEVERE INJURY or DEATH:
1. 2. 3. 4. 5. 6. 7. 8. Read and follow all warnings and instructions. Install garage door opener ONLY on properly balanced and lubricated garage door. An improperly balanced door may NOT reverse when required and could result in SEVERE INJURY or DEATH. ALL repairs to cables, spring assemblies and other hardware MUST be made by a trained door systems technician BEFORE installing opener. Disable ALL locks and remove ALL ropes connected to garage door BEFORE installing opener to avoid entanglement. Where possible, install the door opener 7 feet (2.13 m) or more above the floor. Mount the emergency release within reach, but at least 6 feet (1.83 m) above the floor and avoiding contact with vehicles to avoid accidental release. NEVER connect garage door opener to power source until instructed to do so. NEVER wear watches, rings or loose clothing while installing or servicing opener. They could be caught in garage door or opener mechanisms. Install wall-mounted garage door control:
within sight of the garage door. out of reach of small children at a minimum height of 5feet (1.53m) above floors, landings, steps or any other adjacent walking surface. away from ALL moving parts of the door. Install the emergency release marking. Attach the marking on or next to the emergency release. Install the entrapment warning placard next to the door control in a prominent location. Place emergency release/safety reverse test label in plain view on inside of garage door. Upon completion of installation, test safety reversal system. Door MUST reverse on contact with a 1-1/2"
(3.8 cm) high object (or a 2x4 laid flat) on the floor. To avoid SERIOUS PERSONAL INJURY or DEATH from electrocution, disconnect ALL electric and battery power BEFORE performing ANY service or maintenance. SAVE THESE INSTRUCTIONS. 9. 10. 11. 12. 13. 14. 8 To prevent possible SERIOUS INJURY or DEATH:
Concrete anchors MUST be used if mounting bracket into masonry. NEVER try to loosen, move or adjust garage door, springs, cables, pulleys, brackets or their hardware, ALL of which are under EXTREME tension. ALWAYS call a trained door systems technician if garage door binds, sticks or is out of balance. An unbalanced garage door might NOT reverse when required. Garage door opener MUST be mounted at a right angle to the torsion bar to avoid premature wear on the collar. HARDWARE Installation 1 Position and Mount the Garage Door Opener NOTE: For additional mounting options refer to the accessories page. 1. 2. Close the garage door completely. Slide the garage door opener onto the end of the torsion bar. If the torsion bar is too long or damaged, you may need to cut the torsion bar. Ensure the collar does NOT touch the bearing. Use a level to position and vertically align the garage door opener. Verify the mounting bracket is located on a solid surface such as wood, concrete or door/flag bracket. If installing on drywall, the mounting bracket MUST be attached to a stud. When the garage door opener is properly aligned, mark the mounting bracket holes. If necessary, tighten collar screws on the torsion bar to hold garage door opener in place while marking holes. NOTE: The garage door opener does not have to be flush to wall. Remove the garage door opener from torsion bar. Drill 3/16 inch pilot holes at the marked locations. Drill through metal door rail plates if necessary. 3. 4. 5. OPTION B: HOLLOW SHAFT WITHOUT KEYWAY INSTALLATIONS 6. For doors with hollow shafts or without a keyway, slide the garage door opener back onto the torsion bar until the pilot holes align with the mounting bracket. OPTION A: SOLID SHAFT WITH KEYWAY INSTALLATIONS 6. For doors with solid shafts with a keyway, slide the operator back onto the torsion bar, ensuring that the provided 1" key is in place and aligned with the keyway on the collar. Then, slide the garage door opener back onto the torsion bar until the pilot holes align with the mounting bracket. To secure the torsion bar, tighten the two square head set screws. Begin by hand-tightening both screws until they make contact with the shaft or the key. Then, tighten the screws to turn. 7. 8. 9. 7. To secure the torsion bar, tighten the two square head set screws. Begin by hand-tightening both screws until they touch the shaft. Then, turn the screws to 1 full turn. Collar Key 1 x 1/4"
Secure the mounting bracket to both the wall and the garage door opener. Use the provided 14-10 x 2" screws to firmly fasten the mounting bracket to the wall. To prevent the screws from coming loose, lock the screws in place by tightening the lock nuts until the lock washer is fully flattened against the collar. Screw 14-10 x 2" (2) Shaft Collar
.25" (.6 cm) min. space between bearing and shaft collar Bearing Plate Torsion Bar Set screws
(Torsion bar) Mounting Bracket Screws 14-10 x 2"
9 Installation 2 Attach the Emergency Release Rope and Handle 1. 2. Insert one end of the emergency release rope through the handle. Make sure that NOTICE is right side up. Secure with an overhand knot at least 1" (2.5 cm) from the end of the rope to prevent slipping. Insert the other end of the emergency release rope through the hole in the trolley release arm. Mount the emergency release within reach, but at least 6 feet (1.83 m) above floor, avoiding contact with vehicles to prevent accidental release and secure with an overhand knot. NOTE: If it is necessary to cut the rope, heat seal the cut end with a match or lighter to prevent unraveling. Garage Door Opener Emergency Release Cable Overhand Knot Emergency Release Handle Overhand Knot 3 Install the Automatic Door Lock To prevent possible SERIOUS INJURY or DEATH from a falling garage door:
If possible, use emergency release handle to disengage door ONLY when garage door is CLOSED. Weak or broken springs or unbalanced door could result in an open door falling rapidly and/or unexpectedly. NEVER use emergency release handle unless garage doorway is clear of persons and obstructions. HARDWARE Handle Rope HARDWARE The automatic door lock (model 841LM) is used to prevent the door from being manually opened once the door is fully closed, see Accessories page 38 Screw 1/4"-
20x1/2" (2) NOTE: Older model 24V door locks are incompatible. 1. 2. 3. 4. 5. The lock must be mounted within 10 ft. (3.05m) of door opener If possible, mount on same side as door opener. The third roller from the bottom is ideal for most installations. Ensure rail surface is clean and attach the lock template to the track so that the bolt hole is approximately 1-3"
(2.5-7.6cm) from the center of a door roller. Drill holes as marked on the template. Fasten automatic door lock to the outside of the door track with hardware provided. Run bell wire up wall to door opener. Use insulated staples to secure wire in several places. Insert wire through the bottom of the door opener. 6. Plug the connector into either plug in the door opener. A secondary door lock can be installed on the opposite side of the door following the instructions above. 4 6 1 10 feet (3.05 m) max. 10 5 Door Track Lock Template 3" (7.6 cm) Roller 2 3 Installation 4 Install the Door Control (Smart Control Panel) Install door control within sight of garage door, out of reach of small children at a minimum height of 5 feet (1.5 m) above floors, landings, steps or any other adjacent walking surface, and away from ALL moving parts of door. Your garage door opener is compatible with up to 2 Smart Control Panels or 4 of any other Security+ 2.0 door controls. NOTE: Older LiftMaster door controls and third party products are not compatible. For gang box installations it is not necessary to drill holes or install the drywall anchors. Use the existing holes in the gang box. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Strip 7/16" (11 mm) of insulation from one end of the wire and separate the wires. Connect one wire to each of the two screws on the back of the door control. The wires can be connected to either screw. PRE-WIRED INSTALLATIONS: Choose any two wires to connect, but make note of which wires are used. Mark the location of the bottom mounting hole and drill a 5/32" (4 mm) hole. Install the bottom screw, allowing 1/8" (3 mm) to protrude from the wall. Position the bottom hole of the door control over the screw and slide down into place. Lift the push bar up and mark the top hole. Remove the door control from the wall and drill a 5/32" (4 mm) hole for the top screw. Position the bottom hole of the door control over the screw and slide down into place. Attach the top screw. Run the white and red/white wire from the door control to the garage door opener. Attach the wire to the wall and ceiling with the staples (not applicable for gang box or pre-wired installations). Do not pierce the wire with the staple as this may cause a short or an open circuit. Connect the wire to the red and white terminals on the garage door opener. The wires can be connected to either terminal. Fasten the warning placard to the wall next to the door control. 11. NOTE: DO NOT connect the power and operate the garage door opener at this time. The door will travel to the full open position but will not return to the close position until the safety reversing sensors are connected and properly aligned. See page 13. To prevent possible SERIOUS INJURY or DEATH from electrocution:
Be sure power is NOT connected BEFORE installing door control. Connect ONLY to 7-28 VOLT low voltage wires. To prevent possible SERIOUS INJURY or DEATH from a closing garage door:
Install door control within sight of garage door, out of reach of small children at a minimum height of 5 feet
(1.5 m) above floors, landings, steps or any other adjacent walking surface, and away from ALL moving parts of door. NEVER permit children to operate or play with door control push buttons or remote control transmitters. Activate door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel. ALWAYS keep garage door in sight until completely closed. NEVER permit anyone to cross path of closing garage door. HARDWARE Screw 6ABx1-1/4" (Standard installation) (2) Drywall Anchors (2) Screw 6-32x1"
(pre-wired) (2) Insulated Staples
(Not shown)
(to garage door opener) 7/16" (11 mm) To insert or release wire, push in tab with screwdriver tip
(to door control) 11 Installation IMPORTANT INSTALLATION INSTRUCTIONS To reduce the risk of SEVERE INJURY or DEATH:
This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet ONLY one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT alter the plug. Light is intended for ceiling or wall mount and indoor applications ONLY. 5 Install myQ Remote LED Light The myQ Remote LED Light is designed to plug directly into a standard 120V outlet. Select an appropriate location on the ceiling or wall to mount the light within 6 feet (1.83 m) of an electrical outlet so that the cord and light are away from moving parts. NOTE: If installing light on drywall and a ceiling joist cannot be located, use drywall anchors provided. No pilot hole is required for drywall anchors. 1. Drill pilot holes 6-1/8" (15.6 cm) apart if mounting to joist. 2. OR Screw in drywall anchors 6-1/8"
(15.6cm) apart if mounting to drywall. Determine the length of power cord needed to reach the nearest outlet. Wind any excess cord around cord retainer on the top side of the light base. Route the cord through the channel so the light mounts flush. 3. Open the light lens. 4. 5. 6. Mount the light with the screws provided. Close the light lens. Plug in the light to the outlet. NOTE: The LED light is very bright. DO NOT stare at the light while on a ladder. Your garage door opener remote light has already been programmed at the factory to operate with your opener. Any additional or replacement remote lights will need to be programmed. HARDWARE Drywall Anchor (screw-in) (2) Screw #6x1" (2) Cord Retainer Channel 6-1/8" (15.6 cm) Drywall Anchors Light Lens Screws 12 Installation (continued) 6 Install the Protector System The safety reversing sensor must be connected and aligned correctly before the garage door will move in the down direction. This is a required safety device and cannot be disabled. IMPORTANT INFORMATION ABOUT THE SAFETY REVERSING SENSOR When properly connected and aligned, the safety reversing sensor will detect an obstacle in the path of its electronic beam. The sending sensor (with an amber indicator light) transmits an invisible light beam to the receiving sensor (with a green indicator light). If an obstruction breaks the light beam while the door is closing, the door will stop and reverse to full open position. The receiving sensor has a shorter length of wire and should be mounted on the same side as the operator. If sunlight interference occurs, the receiving sensor can be moved to the other side of the door opening by cutting the wires of the sending sensor and the receiver sensor and reconnecting the wires. The sensors must be installed inside the garage so that the sending and receiving sensors face each other across the door, no more than 6 inches (15 cm) above the floor. Either sensor can be installed on the left or right of the door as long as the sun never shines directly into the receiving sensor lens. The mounting brackets are designed to clip onto the track of sectional garage doors without additional hardware. If it is necessary to mount the sensors on the wall, the brackets must be securely fastened to a solid surface such as the wall framing. Extension brackets (see accessories) are available if needed. If installing in masonry construction, add a piece of wood at each location to avoid drilling extra holes in masonry if repositioning is necessary. The invisible light beam path must be unobstructed. No part of the garage door (door tracks, springs, hinges, rollers or other hardware) may interrupt the beam while the door is closing. Be sure power is NOT connected to the garage door opener BEFORE installing the safety reversing sensor. To prevent SERIOUS INJURY or DEATH from a closing garage door:
Correctly connect and align the safety reversing sensor. This required safety device MUST NOT be disabled. Install the safety reversing sensor so beam is NO HIGHER than 6" (15 cm) above garage floor. Safety Reversing Sensor 6" (15 cm) max. above floor Invisible Light Beam Protection Area Safety Reversing Sensor 6" (15 cm) max. above floor Facing the door from inside the garage. 13 Installation (continued) INSTALLING THE BRACKETS The brackets house the safety reversing sensors in a fixed, secure position so the safety reversing sensors will face each other across the garage door, with the beam no higher than 6" (15 cm) above the floor. Be sure power to the opener is disconnected. Choose one of the following installations. OPTION A: Track Installation (Recommended) 1. Slip the curved arms over the rounded edge of each door track, with the curved arms facing the door, and make sure brackets measure no higher than 6" (15 cm) above the floor. 2. Snap bracket into place against the side of the track. It should lie flush, with the lip hugging the back edge of the track, as shown. If your door track will not support the bracket securely, see Option B: Wall Installation. OPTION B: Wall Installation 1. Place the bracket against the wall with curved arms facing the door. Be sure there is enough clearance for the sensor beam to be unobstructed. 2. If additional depth is needed, an extension bracket (Model 041A5281-1) or wood blocks can be used. See Accessories section. 3. Use bracket mounting holes as a template to locate and drill (2) 3/16" diameter pilot holes on the wall at each side of the door, no higher than 6" (15 cm) above the floor. 4. Attach brackets to wall with lagscrews
(notprovided). If using extension brackets or wood blocks, adjust right and left assemblies to the same distance out from the mounting surface. Make sure all door hardware obstructions are cleared. If Option B will not work, see Option C: Floor Installation. OPTION C: Floor Installation 1. Use wood blocks or extension brackets (see Accessories) to elevate sensor brackets so the lenses will be no higher than 6" (15 cm) above the floor. 2. Carefully measure and place right and left assemblies at the same distance out from the wall. Be sure all door hardware obstructions are cleared. 3. Fasten to the floor with concrete anchors as shown. Door Track Door Safety Reversing Sensor Bracket Fasten Wood Block to Wall with Lag Screws (not provided) Safety Reversing Sensor Bracket Lag Screws (not provided) Extension Bracket (See Accessories)
(Provided with Extension Bracket) Door Door
(Provided with Extension Bracket) Safety Reversing Sensor Bracket Inside Garage Wall Inside Garage Wall Attach with Concrete Anchors
(not provided) Safety Reversing Sensor Bracket Inside Garage Wall Inside Garage Wall Inside Garage Wall Inside Garage Wall Door 14 Inside Garage Wall Inside Garage Wall HARDWARE Hexagonal Screw 10-24 (2) Wing Nut 10-24 (2) Installation (continued) MOUNTING THE SAFETY REVERSING SENSORS 1. Slide a 10-24 hexagonal screw into the slot on each sensor. 2. Use wing nuts to fasten safety reversing sensors to brackets, with lenses pointing toward each other across the door. Be sure the lens is not obstructed by a bracket extension. 3. Finger tighten the wing nuts. Hexagonal Screw Garage Door Wing Nut 6" (15 cm) max. Door Guide WIRE THE SAFETY REVERSING SENSORS The receiving sensor has a shorter length of wire and should be mounted on the same side as the operator. If sunlight interference occurs, the receiving sensor can be moved to the other side of the door opening by cutting the wires of the sending sensor and the receiver sensor and reconnecting the wires. 1. Run the wire from both sensors to the garage door opener. Securely affix the wire to the wall and ceiling with staples (not provided). 2. Strip 7/16 inch (11 mm) of insulation from each set of wires. Separate white from the black the wires. Twist the white wires together. Twist the white/
black wires together. 3. On the garage door opener, push the tab with a screwdriver tip to insert the white wires into the white terminal and the white/black wires into the grey terminal. To insert or release wire, push in tab with screwdriver tip Tab 7/16
(11 mm) Wire 15 RIGHT RIGHT WRONG WRONG Installation (continued) 7 Connect Power To avoid installation difficulties, do not run the garage door opener at this time. To reduce the risk of electric shock, your garage door opener has a grounding type plug with a third grounding pin. This plug will only fit into a grounding type outlet. If the plug doesnt fit into the outlet you have, contact a qualified electrician to install the proper outlet. There are two options for connecting power:
OPTION A: TYPICAL WIRING 1. Plug in the garage door opener into a grounded outlet. 2. DO NOT run garage door opener at this time. PERMANENT WIRING PERMANENT WIRING CONNECTION CONNECTION Ground Tab Ground Tab To prevent possible SERIOUS INJURY or DEATH from electrocution or fire:
Be sure power is NOT connected to the opener, and disconnect power to circuit Ground Wire BEFORE removing cover to establish permanent wiring connection. Ground Wire Green Green Ground Screw Ground Screw Black Wire Black Wire Garage door installation and wiring MUST be in compliance with ALL local electrical and building codes. NEVER use an extension cord, 2-wire adapter or change plug in ANY way to make it White Wire White Wire Black Wire Black Wire fit outlet. Be sure the opener is grounded. RIGHT RIGHT WRONG WRONG RIGHT WRONG PERMANENT WIRING PERMANENT WIRING CONNECTION CONNECTION OPTION B: PERMANENT WIRING CONNECTION If permanent wiring is required by your local code, refer to the following procedure. 1. To make a permanent connection through the 7/8 inch hole in the back of the garage door opener (according to local code):
2. Be sure power is NOT connected to the opener, and disconnect power to circuit. 3. Remove the garage door opener from the torsion bar, remove cover screws and set the cover aside. 4. Cut the line cord 6" (15.2 cm) above the strain relief. 5. Squeeze the strain relief and push into garage door opener, then remove the strain relief from the line cord. 6. Install a 90 conduit (not provided) or flex cable adapter (not provided) to the 7/8" hole. Reinstall garage door opener to torsion bar. 7. Run wires through conduit, cut to proper length and strip insulation. 8. Strip 1/2" (1.3 cm) of insulation from the existing black, white and green wires. 9. Connect the line to the black wire and neutral to the white wire with wire nuts (not provided). Connect ground wire to the green ground screw. 10. Properly secure wires under plastic ties so that they do not come into contact with moving parts. 11. Reinstall cover. Ground Tab Ground Tab Green Green Ground Screw Ground Screw Green Wire Ground Wire Black Wire Ground Wire White Wire Black Wire Black Wire 90 Connector
(Not Provided) White Wire White Wire Black Wire Black Wire Flexible Conduit BACK VIEW Ground Tab Green Ground Screw Ground Wire Black Wire From Power Cord White Wire From Power Cord 16 Installation (continued) 8 Align the safety reversing sensors The door will not close if the sensors have not been installed and aligned correctly. NOTE: After finishing the installation, do not operate this opener at this time. See Set Door Profile and Program the Travel for setting the door drum size and travel limits. Both of these processes are critical to safe and proper operation. Failure to follow these instructions can result in opener and door damage!
The LEDs in both sensors must be glowing steady, which indicates they are powered and aligned correctly. The sending sensor (with an amber LED) transmits an invisible light beam to the receiving sensor (with a green LED). If an obstruction breaks the light beam while the door is closing, the door will stop and reverse to the full open position. If the door is already open, it will not close. TO ALIGN SENSORS:
The sensors can be aligned by loosening the wing nuts, aligning the sensors, and tightening the wing nuts. If the LEDs are not glowing steadily:
Amber LED Green LED
(invisible light beam) If the receiving sensor is in direct sunlight, switch it with sending sensor so it is on the opposite side of the door. Sending Sensor Receiving Sensor
(will have sticker on back) Check that both sensors are installed inside the garage, one on either side of the door. Check that sensors have the same measurement, no higher than 6 above the floor. Check that sensors are facing each other with the lenses aligned and the receiving sensor light does not receive direct sunlight. Amber LED is not lit:
Check there is power to the garage door opener. Check the sensor wire is not shorted/broken. Check the sensor has been wired correctly: white wires to white terminal and white/black wires to grey terminal. Green LED is not lit:
Check that the sensor wire is not shorted/broken. Check that the sensors are aligned. 17 To reduce the risk of FIRE or INJURY to persons:
Disconnect ALL electric and battery power BEFORE performing ANY service or maintenance. Use ONLY LiftMaster part #485LM for replacement battery. DO NOT dispose of battery in fire. Battery may explode. Check with local codes for disposal instructions. ALWAYS wear protective gloves and eye protection when changing the battery or working around the battery compartment. Installation 9 Install the Battery Backup When in Battery Backup mode, myQ Smartphone Control and wireless myQ devices will be disabled. In battery backup mode, the automatic garage door lock will unlock when the garage door is opened, and will remain disabled until power is restored. 1. Unplug the garage door opener. 2. 3. 4. 5. 6. Use a Phillips head screwdriver to remove the battery cover on the garage door opener. Partially insert the battery into the battery compartment with the terminals facing out. Connect red (+) and black (-) wires from the garage door opener to the corresponding terminals on the battery. Replace battery cover and route antenna into channel. Plug in the garage door opener. BATTERY STATUS LED GREEN LED:
All systems are normal. A solid green LED light indicates the battery is fully charged. A blinking green LED indicates the battery is being charged. ORANGE LED:
The garage door opener has lost power and is in battery backup mode. A solid orange LED with beep, sounding approximately every 2 seconds, indicates the garage door opener is operating on battery power. A blinking orange LED with beep, sounding every 30 seconds, indicates the battery is low. RED LED:
The garage door opener's 12V battery needs to be replaced. A solid red LED with beep, sounding every 30 seconds, indicates the 12V battery will no longer hold a charge and needs to be replaced. Replace the battery back up to maintain the battery backup feature. NOTE: Battery does not have to be fully charged to operate the garage door opener. Battery Status LED Red wire (+) Black wire (-) Antenna NOTE: Be sure the short antenna is not pinched by the battery door and held in place as shown. 18 Adjustment 1 Identify Door Profile To identify the door profile number, measure the full drum diameter based on the images below. NOTE: This step is important to ensure the proper operation of the unit. To view a video demonstration of how to identify and set the door profile, scan the QR code. To prevent possible SERIOUS INJURY or DEATH, follow instructions to select and set door profile for safe and proper operation. Standard Lift Sectional Door Door Profile 1 = Standard to Heavy Weight Door* with a 4" drum (Recommended). Door Profile 2 = Light Weight Door with a 4" drum. Door Profile 3 = Heavy Weight Door* with a 6" drum. Door Profile 4 = Light Weight Door with a 6" drum.
*NOTE: Drum sizes may vary by manufacturer. For Standard Lift Sectional Doors:
Drums less than or equal to 5", use 4" drum. Drums more than 5", use 6" drum. Standard to Heavy Weight doors are those with solid wood interiors, wood veneer exteriors, glass windows, insulation, and/or decorations. 4-6 inch diameter 4-6 inch 4-6 inch diameter diameter High Lift Door Door Profile 5 = Tapered drum with rails that raise to a higher elevation 8 inch diameter 8 inch 8 inch diameter diameter Vertical Lift Sectional Door Door Profile 5 = Tapered Drum with rails raising vertically above the opening. 8 inch diameter 8 inch 8 inch diameter diameter 19 Adjustment 2 Set Door Profile 1. 2. 3. To enter Set Door Profile mode, press and hold the black button for one second. The UP and DOWN buttons turn a solid color. To set Door Profile, press the UP and DOWN buttons. The Learn LED button blinks and beeps as you change the setting. The number of Learn LED button blinks indicates which profile you have selected. There is no preset door profile setting. Blinks Drum Size Door Type Unbalanced Door Weight 1 2 3 4 5 4"
4"
6"
6"
8"
Sectional
> 180 lbs. Sectional
< 180 lbs. Sectional
> 400 lbs. Sectional
< 400 lbs. High lift or vertical N/A 4. Press and release the Black button to set the Door Profile. This process is now complete. Proceed to the Travel Learn mode. EXITING DOOR PROFILE NUMBER SETTING If there is no selection within 4.5 minutes, the Door Profile selection mode will be cancelled with a long beep. To prevent possible SERIOUS INJURY or DEATH, after ANY changes to the door profile, reprogram limits. Learn LED Yellow Button Battery LED UP Button Black Button DOWN Button 20 Adjustment 3 Program the Travel Without a properly installed safety reversal system, persons (particularly small children) could be SERIOUSLY INJURED or KILLED by a closing garage door. Incorrect adjustment of garage door travel limits will interfere with proper operation of safety reversal system. After ANY adjustments are made, the safety reversal system MUST be tested. Door MUST reverse on contact with 1-1/2" (3.8 cm) high object (or 2x4 laid flat) on floor. NOTE: While programming the travel, the UP and DOWN buttons can be used to move the door as needed. During the Automatic Force Setup, the door will automatically open and close. 1 Press and hold the UP Button until the door is in the desired UP position. 3 Press and hold the DOWN Button until the door is in the desired DOWN position. 2 Once the door is in the desired UP position press and release the Adjustment Button. The garage door opener lights will blink twice and the DOWN Button will begin to flash. 4 Once the door is in the desired DOWN position press and release the Adjustment Button. The garage door opener lights will blink twice. Program the Travel is now complete. If the garage door opener lights blink 5 times, then programming has timed out and the Travel Limits have not been set. Please restart the Program the Travel process. 4 Automatic Force Set Up Once both the up and down positions have been manually set, the Safety Reversing Sensors will reconnect and become operational. Then, the opener will enter a force-sensing operation by automatically moving the door open and close. The garage door opener will sound an audible and visual alert before automatically opening and closing the door. The garage door opener will beep three times, confirming that the Automatic Force Setup completed successfully. Adjustment is complete. If you hear one long beep after the door attempts to move, then the Automatic Force Set Up has not completed successfully. Please start over at step 1 of Program the Travel. 21
1 2 | 114-5907-000 PROOF1 06.19.23 Part2 | Users Manual | 4.45 MiB | July 19 2023 / January 14 2024 | delayed release |
Adjustment 5 Test the Safety Reversal System 6 Test the Protector System Without a properly installed safety reversal system, persons
(particularly small children) could be SERIOUSLY INJURED or KILLED by a closing garage door. Safety reversal system MUST be tested every month. After ANY adjustments are made, the safety reversal system MUST be tested. Door MUST reverse on contact with 1-1/2"
high (3.8 cm) high object (or 2x4 laid flat) on the floor. Without a properly installed safety reversing sensor, persons
(particularly small children) could be SERIOUSLY INJURED or KILLED by a closing garage door. 1 Open the door. Place an obstruction in the path of the door. 1 With the door fully open, place a 1-1/2 inch (3.8 cm) board (or a 2x4 laid flat) on the floor, centered under the garage door. 2 Press the remote control push button to close the door. The door will not move more than an inch
(2.5 cm). The garage door opener will not close from a remote control if the LED in either safety reversing sensor is off (alerting you to the fact that the sensor is misaligned or obstructed). If the garage door opener closes the door when the safety reversing sensor is obstructed (and the sensors are no more than 6 inches [15 cm] above the floor), call for a trained door systems technician. 2 Press the remote control push button to close the door. The door MUST reverse when it makes contact with the board. If the door stops but does not reverse:
1. Repeat Program the Travel (see Adjustment Step 1);
2. Repeat the Safety Reversal test. If the test continues to fail, call a trained door systems technician. 22 Adjustment (continued) 7 Test the Power Door Lock 1. 2. 3. With the door fully closed, check to ensure that the power lock bolt is visible protruding through the track. Press the button on the remote control to open the garage door. The power door lock should retract before the door begins to move. Press the button on the remote control to close the garage door. When the door reaches the fully closed position, the power door lock should automatically activate to secure the door. NOTE: The power door lock can be manually released by sliding the manual release handle to the open position. However, if the power door lock does not function, contact Chamberlain for a replacement. Power Door Lock Power Door Lock Manual Release Manual Release Lock Bolt Lock Bolt
"Locked"
Locked 8 Test the Emergency Release OPEN THE DOOR MANUALLY:
1. Close the garage door. Slide the manual release handle on power door lock to open before proceeding. 2. Pull down on the emergency release handle until you hear a click. 3. Lift the door manually. RECONNECT THE DOOR TO THE GARAGE DOOR OPENER:
1. Pull down on the emergency release handle until you hear a click. The door will reconnect on the next UP or DOWN operation. To prevent possible SERIOUS INJURY or DEATH from a falling garage door:
If possible, use emergency release handle to disengage door ONLY when garage door is CLOSED. Weak or broken springs or unbalanced door could result in an open door falling rapidly and/or unexpectedly. NEVER use emergency release handle unless garage doorway is clear of persons and obstructions. Emergency Release Handle 23 Operation IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of SEVERE INJURY or DEATH:
1. Read and follow all warnings and instructions. 2. ALWAYS keep remote controls out of reach of children. NEVER permit children to operate or play with garage door control push buttons or remote controls. 3. ONLY activate garage door when it can be seen clearly, it is properly adjusted, and there are no obstructions to door travel. 4. ALWAYS keep garage door in sight and away from people and objects until completely closed. NO ONE SHOULD CROSS THE PATH OF THE MOVING DOOR. 5. NO ONE SHOULD GO UNDER A STOPPED, PARTIALLY OPENED DOOR. 6. If possible, use emergency release handle to disengage trolley ONLY when garage door is CLOSED. Use caution when using this release with the door open. Weak or broken springs or unbalanced door could result in an open door falling rapidly and/or unexpectedly and increasing the risk of SEVERE INJURY or DEATH. 7. NEVER use emergency release handle unless garage doorway is clear of persons and obstructions. 8. NEVER use emergency release handle to pull garage door open or closed. If rope knot becomes untied, you could fall. 9. After ANY adjustments are made, the safety reversal system MUST be tested. 10. Safety reversal system MUST be tested every month. Garage door MUST reverse on contact with 1-1/2" high
(3.8 cm) object (or a 2x4 laid flat) on the floor. Failure to adjust the garage door opener properly increases the risk of SEVERE INJURY or DEATH. 11. ALWAYS KEEP GARAGE DOOR PROPERLY BALANCED. An improperly balanced door may NOT reverse when required and could result in SEVERE INJURY or DEATH. 12. ALL repairs to cables, spring assemblies and other hardware, ALL of which are under EXTREME tension, MUST be made by a trained door systems technician. 13. ALWAYS disconnect electric power to garage door opener BEFORE making ANY repairs or removing covers. 14. This garage door opener system is equipped with an unattended operation feature. The door could move unexpectedly. NO ONE SHOULD CROSS THE PATH OF THE MOVING DOOR. 15. SAVE THESE INSTRUCTIONS. 24 Operation Using Your Garage Door Opener THE PROTECTOR SYSTEM (SAFETY REVERSING SENSORS) When properly connected and aligned, the safety reversing sensors will detect an obstruction in the path of the infrared beam. If an obstruction breaks the infrared beam while the door is closing, the door will stop and reverse to full open position. If the door is fully open, and the safety reversing sensors are not installed, or are misaligned, the door will not close from a remote control. However, you can close the door if you hold the button on the door control or keyless entry until the door is fully closed. The safety reversing sensors do not affect the opening cycle. For more information see page 22. LIGHTS The garage door opener light will turn on when the opener is initially plugged in;
power is restored after interruption, or when the garage door opener is activated. The light will turn off automatically after 4-1/2 minutes. FEATURES Your garage door opener is equipped with features to provide you with greater control over your garage door operation. Alert2Close The Alert2Close feature provides a visual and an audible alert that an unattended door is closing. TIMER-TO-CLOSE (TTC) The TTC feature automatically closes the door after a specified time period that can be adjusted using a TTC enabled door control (Models 881LMW or 880LMW). Prior to and during the door closing the garage door opener lights will blink and the garage door opener will beep. myQ Remote LED Light must be installed to use TTC or myQ to control the door. myQ myQ allows you to control your garage door opener from your mobile device or computer from anywhere. myQ technology uses a 900Mhz signal to provide two way communication between the garage door opener and myQ enabled accessories. The garage door opener has an internal gateway that allows the garage door opener to communicate directly with a home Wi-Fi network and access your myQ account. MEMORY CAPACITY USING YOUR GARAGE DOOR OPENER The garage door opener can be activated through a wall-mounted door control, remote control, wireless keyless entry or myQ accessory. When the door is closed and the garage door opener is activated the door will open. If the door makes contact with an obstruction or is interrupted while opening the door will stop, opener beeps and lights blink 5 times. When the door is in any position other than closed and the garage door opener is activated, the door will close. If the garage door opener makes contact with an obstruction while closing, the door will reverse. However, you can close the door if you hold the button on the door control or wireless keypad until the door is fully closed. The safety reversing sensors do not affect the opening cycle. The safety reversing sensor must be connected and aligned correctly before the garage door opener will move in the down direction. BATTERY BACKUP The battery backup system allows access in and out of your garage, even when the power is out. When the garage door opener is operating on battery power, the garage door opener will run slower, the light will not function, the Battery Status LED will glow solid orange, and a beep will sound approximately every 2 seconds. SECURITY+ 2.0 ACCESSORIES MEMORY CAPACITY Remote Controls Door Controls Keyless Entries myQ Accessories Up to 40 Up to 2 Smart Control Panels or 4 of any other Security+ 2.0 door controls Up to 4 Up to 16 25 Operation Connect With Your Smartphone The Wi-Fi Garage Door Opener is compatible with up to 16 myQ enabled accessories. Up to 10 devices can be paired to the Wi-Fi garage door openers internal gateway. These devices can be controlled with the myQ app. These devices include any combination of myQ garage door openers, Wi-Fi garage door openers, myQ light controls, myQ gate operators or myQ commercial door operators. A LiftMaster Internet Gateway (828LM) can be added if you need to control more than 10 devices using the myQ app. Up to 6 devices can be paired to garage door opener itself (controlled by garage door opener through 900MHz). These devices include any combination of myQ light controls or a garage door and gate monitor. You will need:
Wi-Fi enabled smartphone, tablet or laptop Broadband Internet Connection Wi-Fi signal in the garage (2.4 Ghz, 802.11b/g/n required), see page 3 Password for your home network (router's main account, not guest network) myQ serial number located on the garage door opener SYNCHRONIZE THE DOOR CONTROL To synchronize the door control to the garage door opener, press the push bar until the garage door opener activates (it may take up to 3 presses). The garage door opener must run through a complete cycle before it will activate Wi-Fi programming. DOWNLOAD THE myQ APP TO SET UP AN ACCOUNT AND CONNECT Open and close your door, get alerts and set schedules from anywhere. Connected smart garage door openers also receive software updates to ensure the opener has the latest operational features. LED Blue 1. Download the myQ App. 2. Set up an account and connect. Wi-Fi Status Definition Off - Wi-Fi is not turned on. Blinking - Garage door opener is in Wi-Fi learn mode. Solid - Mobile device connected to the garage door opener. Blue and Green Blinking - Attempting to connect to router. For more information on connecting your garage door opener, visit LiftMaster.com/Customer-Support. Green Blinking - Attempting to connect to the Internet server. Solid - Wi-Fi has been set up and garage door opener is connected to the Internet. Learn Button LED An LED on the garage door opener will indicate Wi-Fi status. See table above. NOTES:
The myQ Smartphone Control WILL NOT work if the garage door opener is operating on battery power. To erase the Wi-Fi settings, see page 30. If you need help adding devices to your myQ account, or to learn more go to LiftMaster.com/Customer-Support. 26 Navigation Buttons To stop the Smart Control Panel LCD from displaying CONNECT myQ APP:
On the Smart Control Panel, press MENU, select PROGRAM and press , press BACK, then press EXIT to return to the main screen. Operation Using the Door Control SYNCHRONIZE THE DOOR CONTROL To synchronize the door control to the garage door opener, press the push bar until the garage door opener activates (it may take up to 3 presses). Test the door control by pressing the push bar, each press of the push bar will activate the garage door opener. Up to 2 Smart Control Panels or 4 of any other Security+2.0 door controls can be connected to the garage door opener. PUSH BAR Press the push bar to open or close the door. NAVIGATION BUTTONS Use the navigation buttons to make selections and program features. Screen Push Bar Navigation Buttons Motion Sensor LIGHT BUTTON Press the LIGHT button to turn the garage door opener lights on or off. When the lights are turned on they will stay on until the LIGHT button is pressed again, or until the garage door opener is activated. Once the garage door opener is activated the lights will turn off after the specified period of time (the factory setting is 4-1/2 minutes). The LIGHT button will not control the lights when the door is in motion. LIGHT button SCREEN The screen will display the time and temperature until the menu button is pressed, and then it will display the menu options. If there is a problem with the garage door opener the screen will display the Diagnostic Code. Refer to the Troubleshooting section. The following features are accessible through the screen using the navigation buttons:
LEARN A DEVICE Any compatible remote controls, wireless keyless entry, Wi-Fi garage door openers, or myQ accessories can be programmed to the garage door opener by accessing the menu and using the navigation buttons. LOCK The LOCK feature is designed to prevent activation of the garage door opener from remote controls while still allowing activation from the door control and keyless entry. This feature is useful for added peace of mind when the home is empty (i.e. vacation). TIMER-TO-CLOSE (TTC) DO NOT enable TTC if operating a one-piece door. TTC is to be used ONLY with sectional doors. Factory default is set to off. TTC can be set to automatically close your garage door from the fully open position after a specified period of time (1, 5, 10 minute intervals or a custom setting up to 99 minutes). The garage door opener will beep and the lights will blink before closing the door. The screen on the door control can display the status of the TTC. TTC WILL NOT work if the garage door opener is operating by battery power or if the safety reversing sensors are misaligned. This feature is NOT intended to be the primary method of closing the door. A keyless entry should be installed in the event of an accidental lock out when using this feature. myQ Remote LED Light must be installed to use TTC or myQ to control the door. NOTE: Before enabling the TTC for the first time, or if you experience a power outage, cycle the garage door opener open and closed to allow the TTC to set. AUTOMATIC LIGHT Motion Sensor Factory default is set to on. This feature automatically turns on the garage door opener lights when motion is sensed. The lights will come on for the set period of time, then shut off. If using the garage door opener light as a work light disable the motion sensor, otherwise the light will turn off automatically if you are beyond the range of the sensor. MAINTENANCE ALERT (MAS) This feature assists the homeowner in ensuring the garage door opener system stays in good working condition. When the garage door opener needs to be serviced (approximately 4500 garage door opener cycles) the command (yellow) and service (red) LEDs will begin to alternately blink back and forth. The factory setting for the MAS feature is off and can be activated at time of installation. Contact your installing dealer for service. 27 Operation SETUP The features on the door control can be programmed through a series of menus on the screen and the navigation buttons. Refer to the descriptions below. SCREEN The main screen displays the time, temperature, and current battery charge (if applicable) FEATURES Press the navigation button below "MENU"
to view the Features menu. SETTINGS Press the navigation button below the down arrow till you see TEMPERATURE to view the Settings menu. SERVICE Press and hold the LIGHT button, then press the second navigation button to view the Service menu. To program a remote control or keyless entry to the garage door opener using the door control, see page 29. Navigation Buttons Set the time, choose 12 or 24 hour clock and show/hide clock. For sectional doors ONLY. Set the Timer-to-Close feature off/on and set the time interval before door closes. NOTE: DO NOT enable TTC if operating a one-piece door. TTC is to be used ONLY with sectional doors. Enable/disable lock. Set up Wi-Fi*, add remote controls, myQ devices, an extra remote button to control your garage door opener lights, or a keyless entry.
* The garage door opener must run through a complete cycle before it will activate Wi-Fi programming. For help related to Wi-Fi, visit WiFiHelp.LiftMaster.com. Display the temperature in Fahrenheit or Celsius and show/hide the temperature. Select a language. Set duration for garage door opener light to stay on after operation, selectable range of 1-1/2 to 4-1/2 minutes. Turn the Motion sensor off/on, and turn the entry light feature off/on. Adjust the contrast of the screen. Displays software version information. Turn the Maintenance Alert (MAS) on/off. Displays the number of remote controls, myQ devices, door controls and keyless entries currently programmed to operate the garage door opener. Displays any errors that have occurred. 28 Programming 893MAX Remote Control Your remote control has been programmed at the factory to operate with your garage door opener. If the remote does not work or you would like to program additional devices, follow the programming steps below. Up to 40 Security+ 2.0 remote controls can be programmed to the garage door opener. Older LiftMaster remote controls are NOT compatible, see page 38 for compatible accessories. Programming can be done through the door control or the learn button on the garage door opener. To program additional accessories refer to the instructions provided with the accessory or visit LiftMaster.com. If your vehicle is equipped with a Homelink, you may require an external adapter depending on the make, model, and year of your vehicle. Visit www.homelink.com for additional information. TO ADD, REPROGRAM, OR CHANGE A 893MAX REMOTE CONTROL/877LM KEYLESS ENTRY PIN USING THE DOOR CONTROL 1. Press the navigation button below "MENU" to view the Features menu. 2. 3. 4. Use the navigation buttons to scroll to "PROGRAM". Select "REMOTE" or "KEYPAD" to program from the program menu. Remote Control: Press the button on the remote control that you wish to operate your garage door. Keyless Entry: Enter a 4-digit personal identification number (PIN) of your choice on the keyless entry keypad. Then press the ENTER button. The garage door opener lights will blink (or two clicks will be heard) when the code has been programmed. Repeat the steps above for programming additional remote controls or keyless entry devices. If programming is unsuccessful, program the remote using the learn button. 1 4 2 Press to continue. 3 Press to continue. MYQ WI-FI OPENER REMOTE MYQ ACCESSORY KEYPAD OR
PIN PROGRAM A 893MAX REMOTE CONTROL USING THE LEARN BUTTON ON THE GARAGE DOOR OPENER 1. Press and hold the program button on the remote control until the LED on the front of the remote control turns on. 2. 3. 4. 1 Press and release the remote control button you wish to use and then press any other button to exit programming. Press and release the Learn button on the garage door opener. The Learn LED will light. Within 30 seconds... Press the remote control button programmed in step 2 until the garage door opener light blinks or two clicks are heard. 2 3 4 c l i c k c l i c k Visor Clip LEARN Button LEARN LED To program other types of remote controls or keyless entries see the instructions included with the device or visit LiftMaster.com/Customer-Support. 29 Programming Program the myQ Remote LED Light Your garage door opener remote light has already been programmed at the factory to operate with your opener. Any additional or replacement remote lights will need to be programmed. PROGRAM A DOOR OPENER TO THE myQ REMOTE LED LIGHT 1. Press the LEARN button on the light until the green LED comes ON. Press the LEARN button on the door opener. OR On the Smart Control Panel go to Menu > Program>
myQAccessory. The code has been programmed when the remote light blinks once. 2. 3. ADD THE myQ REMOTE LED LIGHT TO myQ ACCOUNT Press the LEARN button on the light until the green LED 1. comes ON. Login to the myQ app and add the myQ Remote LED Light. 2. TO ERASE ALL PROGRAMMING FROM THE myQ REMOTE LED LIGHT 1. Press and hold the LEARN button until the LED turns off
(6-10 seconds). All programming is now erased. To Erase the Memory ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES Press and hold the LEARN button on garage door opener 1. until the learn LED goes out (approximately 6 seconds). All remote control and keyless entry codes are now erased. Reprogram any accessory you wish to use. ERASE ALL DEVICES (Including myQ enabled accessories) 1. Press and hold the LEARN button on garage door opener until the learn LED goes out (approximately 6 seconds). 2. Immediately press and hold the LEARN button again until the learn LED goes out. All codes are now erased. Reprogram any accessory you wish to use. ERASE THE WI-FI NETWORK FROM THE GARAGE DOOR OPENER 1. Press and hold the black adjustment button on the garage door opener until 3 beeps are heard (Approximately 6 seconds). ERASE A myQ ACCOUNT Go to myLiftMaster.com/Customer-Support to delete your myQ account. LEARN Button Door Opener LEARN Button Smart Control Panel LEARN Button Black Adjustment Button 30 Programming HomeLink In the rare case the HomeLink system does not program with the Security+ 2.0 Garage door opener, install a repeater kit. Refer to HomeLink instructions below. HomeLink I II III Repeater Kit HomeLink is the in-vehicle system. The image used is for reference only and your product may look different. WHEN TO INSTALL A HOMELINK REPEATER KIT All 2006 and Older vehicles A repeater kit is required and must be purchased by the homeowner. All 2007 and Newer vehicles Program the HomeLink according to the vehicle instructions. If after ONE attempt to program the HomeLink to the garage door opener and you are unsuccessful, install a repeater. HOW TO ORDER Order the HomeLink repeater kit from an installer or call 1-800-355-3515. To program the HomeLink repeater kit, refer to the instructions provided in the kit or visit: http://www.homelink.com/program. ADJUSTMENT QUICK FACTS Only one repeater kit is required per home. Use different HomeLink buttons in vehicle if programming multiple cars, button 1 first car, button 2 second car etc. HomeLink remote is NOT a garage door opener. If you are using the HomeLink repeater with a garage door opener that has a battery backup system, ensure your original garage door opener remote control is programmed to the garage door opener and place it in your glove box for use in the event of a power outage. The remote included in this repeater kit MUST be kept for future programming (new vehicle, new garage door opener etc). 31 Maintenance Care of Your Garage Door Opener MAINTENANCE SCHEDULE EVERY MONTH Manually operate door. If it is unbalanced or binding, call a trained door systems technician. Check to be sure door opens and closes fully. Adjust limits if necessary (see Adjustment Step 1). Repeat the safety reversal test. Make any necessary adjustments (see Adjustment Step 2). EVERY YEAR Oil door rollers, bearings and hinges. The garage door opener does not require additional lubrication. Do not grease the door tracks. myQ Remote LED Light Unplug the light before cleaning. Use a lightly dampened cloth for cleaning. DO NOT use liquid cleaners on the light lens. THE REMOTE CONTROL BATTERY The LED(s) on your remote control will stop blinking when the battery is low and needs to be replaced. To replace battery, open the case as shown. Insert battery positive side up (+). Replace the battery with only 3V CR2032 coin cell batteries. Dispose of old battery properly. Pry open the case first in the middle (1), then at each side (2 and 3) with the visor clip. 3V CR2032 3 1 2 32 To prevent possible SERIOUS INJURY or DEATH:
NEVER allow small children near batteries. If battery is swallowed, immediately notify doctor. To reduce risk of fire, explosion or chemical burn:
Replace ONLY with 3V CR2032 coin batteries. DO NOT recharge, disassemble, heat above 212 F (100 C) or incinerate. Garage Door Opener Diagnostic LED Troubleshooting Diagnostic Chart Your garage door opener is programmed with self-diagnostic capabilities. The UP and DOWN arrows on the garage door opener blink the diagnostic codes. UP Button DOWN Button DIAGNOSTIC CODE Up Arrow Blink(s) 1 Down Arrow Blink(s) 1 1 1 1 1 1 2 3 3 3 4 4 4 5 SYMPTOM SOLUTION The garage door opener will not close. Safety sensors are not installed, connected or wires may be cut. Inspect sensor wires for a disconnected or cut wire. The garage door opener will not close. The door control will not function. The garage door opener will not close, and the lights blink. Door moves 6-8"
(15-20cm) stops or reverses. No movement, only a single click. There is a short or reversed wire for the safety sensors. Inspect safety sensor wire at all staple points and connection points and replace wire or correct as needed. The wires for the door control are shorted or the door control is faulty. Inspect door control wires at all staple points and connection points and replace wire or correct as needed. Safety sensors are misaligned or were momentarily obstructed. Realign both sensors to ensure both LEDs are steady and not flickering. Make sure nothing is hanging or mounted on the door that would interrupt the sensors path while closing. Manually open and close the door. Check for binding or obstructions, such as a broken spring or door lock, correct as needed. Check wiring connections at travel module and at the logic board. Replace travel module if necessary. Manually open and close the door. Check for binding or obstructions, such as a broken spring or door lock, correct as needed. Replace logic board if necessary. Opener hums for 1-2 seconds no movement. Manually open and close the door. Check for binding or obstructions, such as a broken spring or door lock, correct as needed. Replace motor if necessary. Door coast after it has come to a complete stop. Program travel to coasting position or have door balanced by a trained technician. 2 3 4 5 6 1-5 No movement or sound. Replace logic board. 1 3 5 The garage door opener moves slightly, then stops The battery status LED is constantly blinking green. The garage door will not close. Door reverses during close travel direction only. 1-4 Door is moving, stops or reverses. Opener beeps and lights blink. 5 6 5 Opener runs approximately 6-8" (15-20 cm), stops and reverses. The garage door opener will not close, and the lights blink. The door will not close when using Timer-to-
Close or myQ Smartphone Control Activate the garage door opener again. If problem persists, replace logic board. Battery backup charging circuit error, replace logic board. Check that the CTM Learn is appropriate to the installation. Check for possible door obstructions and remove. Replace defective CTMs with good CTMs to clear the error code (see optional CTM accessory). Manually open and close the door. Check for binding or obstructions, such as a broken spring or door lock, correct as needed. If the door is binding or sticking contact a trained door systems technician. If door is not binding or sticking attempt to reprogram travel. Communication error to travel module. Check travel module connections, replace module if necessary. Safety sensors are misaligned or were momentarily obstructed. Realign both sensors to ensure both LEDs are steady and not flickering. Make sure nothing is hanging or mounted on the door that would interrupt the sensor's path while closing. myQ Remote LED Light must be installed to use TTC or myQ to control the door. Plug in the myQ Remote LED Light and make sure it is programmed to the garage door opener. 33 Troubleshooting Additional Troubleshooting The garage door opener doesn't operate from either the door control or the remote control:
Does the garage door opener have electric power? Plug a lamp into the outlet. If it doesn't light, check the fuse box or the circuit breaker. (Some outlets are controlled by a wall switch.) Have you disabled all door locks? Review installation instruction warnings on page 8. Are the wiring connections correct? Review Installation Step 5. Is there a build-up of ice or snow under the door? The door may be frozen to the ground. Remove any restriction. The garage door spring may be broken. Have it replaced (see page 3 for reference). The door opener operates from the single button control station, but not from a remote control:
Reprogram the remote control and replace the battery if necessary. Repeat with all remote controls. The door opens and closes byitself:
Be sure that all remote control push buttons are off. Remove the bell wire from the single button control station terminals and operate from the remote only. If this solves the problem, the single button control station is faulty, or there is an intermittent short in the wire. Replace the control station. Erase the memory and reprogram all remote controls (refer to the instructions provided with the remote control or visit LiftMaster.com/Customer-Support). This is part of normal and safe operation of the garage door opener. The door appears to twitch or move up slightly after closing:
My remote control will not activate the garage door:
Verify the lock feature is not activated on the door control. Reprogram the remote control. If the remote control will still not activate the door check the diagnostic codes to ensure the garage door opener is working properly. Change the location of the remote control in your car. Some installations may have shorter range due to a metal door, foil backed insulation, or metal garage siding. The remote control has short range:
The door stops or reverses to open limit and the opener beeps and lights flash 5 times:
Check power door lock. Is something obstructing the door? Is it out of balance, or are the springs broken? Remove the obstruction or call a trained door system technician to repair the door. The door doesn't open completely:
The door opens but won't close:
The safety reversing sensor must be connected and aligned correctly before the door opener will move in the down direction. If you are able to close the door using constant pressure, verify the safety reversing sensors are properly installed, aligned and free of any obstructions (see page 13). Clear any ice or snow from the garage floor area where the door closes. Review Adjustment Step 1. The door reverses for no apparent reason:
Repeat safety reverse test after adjustments. My door will not close:
The safety reversing sensor must be connected and aligned correctly before the garage door opener will move in the down direction.
- Verify the safety reversing sensors are properly installed, aligned and free of any obstructions. The garage door opener strains to operate door:
The door may be out of balance or the springs may be broken. Close the door and use the emergency release handle to disconnect the door. Open and close the door manually. A properly balanced door will stay in any point of travel while being supported entirely by its springs. If it does not, disconnect the garage door opener and call a trained door systems technician. The garage door springs may be broken. See above. If the problem occurs on the first operation of the garage door opener, door may be locked. Disable the power door lock. The garage door opener motor hums briefly, then won't work:
The garage door opener won't operate due to power failure:
Manually open the power door lock. Use the emergency release handle to disconnect the door. The door can be opened and closed manually. When power is restored, pull manual release a second time. When in Battery Backup mode, the opener should be able to operate up to 20 times. Disable any door locks. Use the emergency release handle to disconnect the door. The door can be opened and closed manually. When power is restored, pull manual release a second time. When in battery backup mode, battery power will last for 30 hours or up to 20 cycles over a 24 hour period. 34 Troubleshooting Collar not tightened securely. Tighten collar and reprogram limits (see Adjustment Step 3). Some minor movement is normal for this product. If it is excessive the collar will wear prematurely. Check to make sure the torsion bar is not moving left/right excessively. Check to make sure the torsion bar is not visibly moving up and down as it rotates. Check that the opener is mounted at a right angle to the jackshaft. If not, move the position of the mounting bracket. Additional Troubleshooting (Continued) Door loses limits:
The garage door opener moves when the door is in operation:
Automatic door lock connector will not fit the door opener plug:
Older model 24V door locks are incompatible. Use automatic door lock model 841LM, see Accessories page Automatic garage door lock does not activate when garage door opens or closes:
In battery backup mode, the automatic garage door lock will unlock when the garage door is opened, and will remain disabled until power is restored. The door opener is beeping:
Indicates unattended closure. The opener has been activated by the myQ App or the Garage and Gate Monitor. A solid orange LED with beep, sounding approximately every 2 seconds, indicates the door opener is operating on battery power. A blinking orange LED with beep, sounding every 30 seconds, indicates the battery is low. A solid red LED with beep, sounding every 30 seconds, indicates the 12V battery will no longer hold a charge and needs to be replaced. Replace the battery. The garage door is beeping and the red LED is blinking:
The battery charge is low or the battery is dead. myQ Smartphone Control, wireless myQ devices, and Timer-To-Close will not work:
Verify your drum setting is appropriate via the steps shown on page 19 in the manual. When in Battery Backup mode, myQ Smartphone Control, wireless myQ devices and Timer-To-Close will be disabled. myQ Remote LED Light must be installed to enable use of Timer-to-Close or myQ Smartphone Control of the door. Plug in the myQ Remote LED Light and make sure it is programmed to the garage door opener. It may take up to 5 minutes to enable Timer-to-Close and myQ Smartphone Control. Door travels faster or slower than expected:
Door speed varies over travel:
Cable unspooling upon obstruction near top limit The door hits the floor and reverses for no reason Verify collar screw install and set screw tightens. The garage door opener motor hums briefly, then won't work Verify your drum setting is appropriate via the steps shown on page 19 in the manual. If cable unspools, please contact a Professional Door Dealer for service. Verify collar screw install and set screw tightens. NOTICE: This device complies with part 15 of the FCC rules and Innovation, Science and Economic Development Canada license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ-
ing interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device must be installed to ensure a minimum 20 cm (8 in.) distance is maintained between users/bystanders and device. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules and Industry Canada ICES standard. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 35 Repair Parts Installation Parts 2 4 6 5 1 3 KEY NO. 1 2 3 PART NO. DESCRIPTION 041A4582 041B4494-1 041-0136 Emergency release rope and handle assembly 2-Conductor bell wire - white and white/red Safety Reversing Sensor kit (receiving and sending sensors) with 2-conductor bell wire attached KEY NO. 4 5 6 PART NO. DESCRIPTION 041C0902 Mounting bracket 041-0155-000 Safety reversing sensor brackets (2) 041-0400 Collar with hardware and key 114-XXXX-000 User's Guide 114-XXXX-000 Quick Start Guide 36 Repair Parts Garage Door Opener Assembly Parts 5 2 1 4 3 KEY NO. 1 2 3 PART NO. DESCRIPTION 041DJ003MC 041B8861 041-0401 Logic board Travel module with wire harness Transformer KEY NO. 4 5 PART NO. DESCRIPTION 041-0403 041-0407-000 Power cord Cover 041-0408-000 NOT SHOWN Battery door and logic board door Contact Information STOP!
This garage door opener WILL NOT work until the safety reversing sensors are properly installed and aligned. Address repair parts order to:
LiftMaster 6020 S. Country Club Rd. Tucson, AZ 85706 For installation and service information, visit us online at:
LiftMaster.com/Customer-Support Before calling, please have the model number of the garage door opener. If you are calling about a troubleshooting issue, it is recommended that you have access to your garage door opener while calling. If you are ordering a repair part please have the following information: part number, part name, and model number. 37 Accessories MAX ACCESSORIES Compatible with LiftMaster garage door openers manufactured since 1993. 878MAX Wireless Keyless Entry:
For use outside of the home to enable access to the garage using a 4-digit PIN. 374UT SEND PASS READY ENROLL ENROLL FAIL RETRY Mini Universal Remote Control:
The Mini Universal Remote Control can be programmed to activate up to two products, such as a garage door opener,myQ light controls, gate operator, or commercial door operator. 893MAX SEND PASS ENROLL ENROLL FAIL 3-Button MAX Remote Control:
READY RETRY Includes visor clip. ENROLL ENROLL FAIL RETRY SEND PASS READY myQ ACCESSORIES 827LM myQ Remote LED Light:
Wireless light that can program to the door opener or a remote control. ENROLL ENROLL FAIL RETRY SEND PASS READY ENROLL ENROLL FAIL RETRY SEND PASS READY STANDARD ACCESSORIES 885LM Security+ 2.0 Wireless Door Control:
Push bar, light feature and auxiliary button. Includes battery. 891LM Single Button Security+ 2.0 Remote Control:
Includes visor clip. 893LM 3-Button Security+ 2.0 Remote Control:
Includes visor clip. SEND PASS READY ENROLL ENROLL FAIL RETRY 877LM Wireless Keyless Entry:
For use outside of the home to enable access to the garage using a 4-digit PIN. 485LM Battery Backup:
Provides backup power to the door opener. The battery has enough power for 30 hours of standby power or up to 20 cycles over a 24 hour period. ENROLL ENROLL FAIL RETRY SEND PASS READY 38 041A5281-1 Extension Brackets:
(Optional) For safety reversing sensor installation onto the wall or floor. 480LM Alternate Mounting Kit:
Automatic Garage Door Lock Model 841LM with 2-Conductor White and White/Black Bell Wire with Connector NOTE: Older model 24V door locks are incompatible This kit allows model 8500WMC to be mounted below the torsion bar in the case where the torsion bar is not round or the normal mounting area is obstructed. 2 Conductor Bell Wire White and White/Red Collar with Set Screws The Protector System
(2) Safety Reversing Sensors
(1 Sending Sensor and 1 Receiving Sensor) with 2-Conductor White and White/Black Bell Wire attached Battery Model 485LM 2 Conductor Bell Wire Fil de sonnerie blanc et Cable del timbre de White and White/Red 2 conductores, Blanco blanc/rouge 2 conducteurs y Blanco/Rojo Collar with Collar con Embase avec Set Screws vis de pression tornillos de jacin Batera modelo 485LM Batterie modle 485LM Battery Model 485LM 041A6104 Cable Tension Monitor:
Cable tension monitor with 33 foot
(10 m) cord. 841LM Mounting Bracket Garage Door Opener Cable Tension Monitor with 2-Conductor Green/White Bell Wires Safety Labels and Literature Safety Reversing Sensor Bracket (2) Automatic Door Lock:
The automatic door lock is used to prevent the door from being manually opened once the door is fully closed. Serrure automatique de porte de garage Automatic Garage Door Lock Model 841LM Seguro de puerta de garaje automtico Modle 841LM avec l de sonnerie deux with 2-Conductor White and White/Black modelo 841LM con cable de timbre de 2 conducteurs blanc et blanc/noir et Bell Wire with Connector conductores blanco y blanco/negro y conector connecteur NOTA: Los seguros de puerta de 24 V de NOTE: Older model 24V door locks REMARQUE : Les vieux modles de serrure are incompatible los modelos antiguos no son compatibles de porte de 24 V sont incompatibles. ENROLL ENROLL SEND PASS READY FAIL RETRY Mounting Bracket Mensula Support de montage Garage Door Opener Abre-puertas de garaje Ouvre-porte de garage Protector System The Protector System Protector System (2)
(2) Safety Reversing Sensors
(2) Capteurs d'inversion de Sensores de seguridad de
(1 Sending Sensor and scurit (1 oeil de transmission reversa (1 emisor y 1 1 Receiving Sensor) with et 1 oeil de rception) avec l de receptor) con cable de timbre 2-Conductor White and sonnerie blanc et blanc/noir de 2 conductores, (Blanco y deux conducteurs x White/Black Bell Wire attached Blanco/Negro) conectado Monitor de tensin del cable con cables Moniteur de tension de cble avec ls Smart Control Panel Cable Tension Monitor with de timbre de 2 conductores, Verde/Blanco d'appel deux conducteurs vert/blanc 2-Conductor Green/White Bell Wires Model 880LMW 3-Button Premium Remote Control Model 893MAX (1) Safety Labels Etiquetas de tiquettes de scurit and Literature seguridad y literatura et documentation Remote Control Visor Clip Safety Reversing Sensor Bracket (2) Support de capteur de scurit (2) Mnsulas para sensor de seguridad (2)
(Garage Door Opener Light) myQ Remote LED Light Model 827LM with Hardware Bag Smart Control Panel Smart Control Panel Smart Control Panel modelo 880LMW modle 880LMW Model 880LMW Control remoto de 3 botones Tlcommande haut de 3-Button Premium modelo 893MAX (1) gamme 3 boutons, Remote Control Model 893MAX (1) modle 893MAX (1) Broche de visera Agrafe de pare-soleil Remote Control para control remoto dtlcommande Visor Clip Luz LED remota myQ myQ Remote LED Light Lampe DEL tlcommande modelo 827LM myQ de modle 827LM Model 827LM
(Luz del abre-puertas de garaje)
(lampe douvre-porte de garage)
(Garage Door Opener Light) con bolsa de piezas with Hardware Bag avec sac de quincaillerie Warranty LiftMaster (Seller) warrants to the first retail purchaser of this product, for the residence in which this product is originally installed, that it is free from defects in materials and/or workmanship for a specific period of time as defined below (the Warranty Period). The warranty period commences from the date of purchase. LIFTMASTER LIMITED WARRANTY Parts 5 years Motor Lifetime Accessories 1 year Battery Backup 1 year WARRANTY PERIOD The proper operation of this product is dependent on your compliance with the instructions regarding installation, operation, and maintenance and testing. Failure to comply strictly with those instructions will void this limited warranty in its entirety. If, during the limited warranty period, this product appears to contain a defect covered by this limited warranty, call 1-800-528-9131, toll free, before dismantling this product. You will be advised of disassembly and shipping instructions when you call. Then send the product or component, pre-paid and insured, as directed to our service center for warranty repair. Please include a brief description of the problem and a dated proof-of-purchase receipt with any product returned for warranty repair. Products returned to Seller for warranty repair, which upon receipt by Seller are confirmed to be defective and covered by this limited warranty, will be repaired or replaced (at Sellers sole option) at no cost to you and returned pre-paid. Defective parts will be repaired or replaced with new or factory rebuilt parts at Sellers sole option. [You are responsible for any costs incurred in removing and/or reinstalling the product or any component.]
ALL IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE APPLICABLE LIMITED WARRANTY PERIOD SET FORTH ABOVE FOR THE RELATED COMPONENT(S), AND NO IMPLIED WARRANTIES WILL EXIST OR APPLY AFTER SUCH PERIOD. Some States and Provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. THIS LIMITED WARRANTY DOES NOT COVER NON-DEFECT DAMAGE, DAMAGE CAUSED BY IMPROPER INSTALLATION, OPERATION OR CARE (INCLUDING, BUT NOT LIMITED TO ABUSE, MISUSE, FAILURE TO PROVIDE REASONABLE AND NECESSARY MAINTENANCE, UNAUTHORIZED REPAIRS OR ANY ALTERATIONS TO THIS PRODUCT), LABOR CHARGES FOR REINSTALLING A REPAIRED OR REPLACED UNIT, REPLACEMENT OF CONSUMABLE ITEMS
(E.G., BATTERIES IN REMOTE CONTROL TRANSMITTERS AND LIGHT BULBS), OR UNITS INSTALLED FOR NON-
RESIDENTIAL USE. THIS LIMITED WARRANTY DOES NOT COVER ANY PROBLEMS WITH, OR RELATING TO, THE GARAGE DOOR OR GARAGE DOOR HARDWARE, INCLUDING BUT NOT LIMITED TO THE DOOR SPRINGS, DOOR ROLLERS, DOOR ALIGNMENT OR HINGES. THIS LIMITED WARRANTY ALSO DOES NOT COVER ANY PROBLEMS CAUSED BY INTERFERENCE. UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES ARISING IN CONNECTION WITH USE, OR INABILITY TO USE, THIS PRODUCT. IN NO EVENT SHALL SELLERS LIABILITY FOR BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE OR STRICT LIABILITY EXCEED THE COST OF THE PRODUCT COVERED HEREBY. NO PERSON IS AUTHORIZED TO ASSUME FOR US ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS PRODUCT. Some states and provinces do not allow the exclusion or limitation of consequential, incidental or special damages, so the above limitation or exclusion may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state and province to province. 39 Automatic Garage Door Opener Safety & Maintenance Guide Garage Door Opener Safety An Automatic Decision A garage door is the largest moving object in the home. An improperly adjusted garage door and opener can exert deadly force when the door closes which could lead to entrapment of children or adults and subsequent injury or death. Proper installation, operation, maintenance, and testing of the garage door and automatic opener are necessary to provide a safe, trouble-free system. Careless operation or allowing children to play with or use garage door opener controls are also dangerous situations that can lead to tragic results. A few simple precautions can protect your family and friends from potential harm. Please review the safety and maintenance tips in this brochure carefully and keep it for reference. Check the operation of your garage door and opener to ensure they function in a safe and trouble-free manner. Be sure to read all Important Safety Information found in your garage door openers manual as it provides more details and safety considerations than can be supplied with this brochure. Garage Door Openers are Not Toys Discuss garage door and opener safety with your children. Explain the danger of being trapped under the door. Stay away from a moving door. Keep transmitters and remote controls out of reach of children. Do not let children play with or use transmitters or other remote control devices. The wall-mounted push button should be out of reach of children, at least 5 feet from the nearest standing surface and away from all moving parts. Mount and use the button where you can clearly see the closing garage door. Keep the door in sight until it completely closes when using the wall-mounted push button or transmitter. 40 Routine Maintenance Can Prevent Tragedies Make monthly inspection and testing of your garage door and opener system a part of your regular routine. Review your owners manual for both the door and door opener. If you dont have the owners manuals, contact the manufacturer(s) and request a copy for your specific model(s). Look for the opener model number on the back of the power unit. WARNING Springs are under high tension. Only qualified individuals should adjust them. Visually check the door and installation:
Starting with the door in the closed position, use the manual disconnect on the opener to disconnect the door. Look for signs of wear or damage on hinges, rollers, springs, and door panels. These parts may require periodic lubrication. Check the owners manual for suggested maintenance. If any signs of damage are evident, contact a trained door systems technician for assistance. Verify the photoeye height is no higher than 6" from the garage floor. Test the door for proper operation:
Open and close the door manually using handles or suitable gripping points. The door should move freely and without difficulty. The door should balance and stay partially open 34 feet above the floor. If you detect any signs of improper operation, contact a trained door systems technician for assistance. Test the opener safety features:
Reconnect the opener to the door using the manual disconnect and open the door. Place a 2x4 board flat in the path of the door (1) and try to close it (2). The door should stop when it comes in contact with the 2x4 and then reverse direction. Block the photoelectric sensor by waving an object in front of the sensor and attempt to close the door. The door should not close unless the wall-mounted push button is manually held during operation. If the opener does not perform as described, contact a trained door systems technician for assistance. 41 2 1 42 43 114-5907-000 Wi-Fi is a registered trademark of Wi-Fi Alliance. 2023 LiftMaster LLC All Rights Reserved 44
1 2 | Internal Photos | Internal Photos | 388.45 KiB | July 19 2023 / January 14 2024 | delayed release |
1 2 | 132-3454-000--universal | ID Label/Location Info | 183.53 KiB | July 19 2023 / July 21 2023 |
Existing Label 2.75 x 4.25 x .04 (Wx Hx R) RESIDENTIAL DOOR OPERATOR / OPERATEUR DE POTE RESIDENCIAL / OPERADOR DE PUERTA RESIDENCIAL DE PIECE/NOM. DE PART:
May be patent protected. Put etre protg par brevet 2023-06-07 Podria extar protegide por derechos de patente. See [Vek] Yon weeet: Losier somypetonts MAC ADDRESS / ADRESSE MAC / DIRECCION MAC Chamberlain Group LLC, Oak Brook, IL 60523, USA Country of origin: Mexico / Pays d'origien: Mexico Pais de origen: Mxico a CRJB3 MC moons \O DATE / FECHA:
c\YL) us uisteo To avoid SERIOUS PERSONAL INJURY or DEATH:
* Disconnect ALL electric and battery power before performing ANY maintenance.
* After ANY adjustments are made, the safety reversal system MUST be tested. Door MUST reverse on contact with 1-1/2 high object (or 2x4 laid flat) on the floor. See instructions for proper adjustment procedure. Pour prvenir d'ventuelles BLESSURESGRAVES, voire MORTELLES:
+ Dbrancher TOUTE alimentation lectrique et la batterie AVANT deffectuer TOUT entretien.
* Apres avoir effectu QUELQUE rglage que ce soit, on DOIT faire 'essai du systme d'inversion de scurit. La porte de garage DOIT remonter au contact d'un objet d'une hauteur de 3,8 cm (1 1/2 po) (ou d'un 2x4 pos a plat) du sol. Voir |
bonne mthode de rglage. Para evitar una LESION PERSONAL GRAVE o INCLUSO LA MUERTE:
+ Desconecte TOTALMENTE la corriente elctric y de la bateria ANTES de realizar CUALQUIER mantenimiento.
* Despus de llevar a cabo CULAQUIER ajuste, SE DEBE probar el sistema de reversa de seguridad. La puerta DEBE retrocede al entrat en contacto con un objeto de 3.8 cm (1 1/2 de pulg.) de altura (0 de 5x 10 cm [2 x 4 pulg.] acostado en el piso). Consulte las instrucciones para conocer el procedimiento de ajuste adecuado. NEC CL2 12V VOLTSIVOLTIOS AMP uz Strin wirectn: - 74eO" ~
instructions pour la myQ SERIAL NUMBER/NUMERO DE SERIE DE myQ/NUMERO DE SERIEDEmyQ 132-3454-000
1 2 | Test setup photos etr2202429-01 Realtek WiFi | Test Setup Photos | 819.95 KiB | July 19 2023 / January 14 2024 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-07-21 | 902.25 ~ 926.75 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2023-07-21
|
||||
1 2 | Applicant's complete, legal business name |
Chamberlain Group Inc, The
|
||||
1 2 | FCC Registration Number (FRN) |
0004301545
|
||||
1 2 | Physical Address |
300 Windsor Dr
|
||||
1 2 |
Oak Brook, IL
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
r******@elitetest.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
HBW
|
||||
1 2 | Equipment Product Code |
0350
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B****** K********
|
||||
1 2 | Title |
Regulatory Engineering Manager
|
||||
1 2 | Telephone Number |
630 9********
|
||||
1 2 | Fax Number |
630 5********
|
||||
1 2 |
b******@chamberlain.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
The Chamberlain Group, Inc.
|
||||
1 2 | Name |
L******** L****
|
||||
1 2 | Physical Address |
300 Windsor Drive
|
||||
1 2 |
Oak Brook, Illinois 60523
|
|||||
1 2 |
Oak Brook, 60523
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
63099********
|
||||
1 2 |
L******@chamberlain.com
|
|||||
1 2 |
l******@chamberlain.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/14/2024 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | MyQ - Garage Door Opener | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is EIRP. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Elite Electronic Engineering Inc.
|
||||
1 2 | Name |
K**** H********
|
||||
1 2 | Telephone Number |
630-4******** Extension:
|
||||
1 2 | Fax Number |
630-4********
|
||||
1 2 |
k******@elitetest.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 902.25000000 | 926.75000000 | 0.0331000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2412 | 2462 | 0.288 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 2402 | 2480 | 0.0017 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15C | CC | 2402 | 2480 | 0.019 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC