Liftt-Master The Professional Line Children operating or playing with a garage door opener can injure themselves or others. t Owner's Manual The garage door could close and cause serious injury or death. Do not allow children _ to operate the wall push button(s Model Stil $/ 3 ISL M controls). P ( r remote Single-Function Remote Control A moving garage door could injure or kill N _* someone under it. Activate the opener only Mode: 830M when you can see the door clearly, it is free of obstructions, and is properly adjusted. Mufti-Function Remote Control The 80 Series remote control (with green battery test light) works only with door openers and light controls having a green "SMART" button and a green indicator light. /
Programming instructions are described and illustrated below. The additional push buttons on the Multi-Function Remote Control can also activate other garage door openers and/or light controls.
(Instructions for programming light products are included with those accessories.) To comply with FCC/IC rules, adjustment or modification of receiver and/or transmitter is prohibited, except for changing the code setting and replacing SMART" GARAGE DOOR OPENERS the transmitter battery. THERE ARE NO USER SERVICEABLE PARTS.
~ a
(With Green SMART Button Figure 1 Model ai and Green Indicator Light) PROGRAM THE OPENER TO ACCEPT THE REMOTE CONTROL CODE Select a remote contro! push button to operate the opener. The /arge button is recommended for use with a garage door opener. 4. Press and hold the selected remote control push button (Figure 1). 2. Then press and release the green "SMART" button on the opener panel (Figure 2). The opener light will flash once. Release the remote control push button.
; Garage Door Opener Now the opener will operate when the remote push (With Green SMART" Button) button is pressed. NOTE: If you release the remote control push button before the opener light flashes, the receiver has not accepted the code.
* Press and hold the SMART" button on the opener panel until the indicator light turns off (about 6 seconds). ALL the'codes the opener has learned Figure 2 will be erased. - Green Green
"Smart" _ Indicator To reprogram, repeat Steps 1 and 2 for each remote Button Light control in use. Code programming instructions are also located on the opener panel. Replacement Parts Single-Function remote case, cover, Screw Multi-Function remote case, cover, screw
(circuit board not included) Model@ttM | 41A3984-7 (circuit board not included) Model 83LM 41A3888-7 Visor Clip 29C128 3k Volt battery | 9 (-3ISLM 1994, Chamberlain Group Inc. 114A1763A . All Rights Reserved Printed in Mexico