nan Te 74-315 LM Model S48 Securi +
bife-Master 7 4 4-Channel Remote contol a OWNER'S MANUAL NOTICE: To comply with FCC rules, adjustment or modifications of this receiver
| d/or transmitter are prohibited, axcept for changing the code setting or placing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. Children operating or playing with a garage door opener can injure themselves or others. The garage door could close and A149 3IG LM The SraLat renvota control can activate We separate garage door openers, gate openers, entryways and/or light controls. cause serious injury or death. Do not allow children to operate
(Instructions for programming light products are included with the wail push butiowe or remote controls. A those accessories.) A moving garage door could injure or kill someone under it The left push button works only with receivers having a yellow Activate the apener only when you can see the door clearly, it is incicator light. The rolling code between this channel and the free of obstructions, and is properly adjusted. receiver changes with each use, randomly accessing over 100 billion new codes. Tkf{
rh | Model erat. 1 74-315LM secunmty+
@ push button on the right is for use when several persons SECURITY+ Garage Door Opener are operating one receiver. Its code can be matched to other Remote Control CGI manufactured fixed code or billion code ramotes. The code between this channel and the receiver remains constant until reprogrammed. Instructions are described and illustrated below. WHEN USED WITH SECURITY+* Smart* (leam) \
B indicator Li GARAGE DOOR OPENERS sen ferent To program the opener to accept the remote control code: Figure 1 Figure 2 1. Press and hold the left remote control push button. See
-Figure 1. WHEN SEVERAL REMOTES OPERATE ONE DEVICE 9. Press and release the Smart (learn) button on the opener To match the TH 3156M CGI manufactured panel. See Figure 2. The indicator light on the panel will remotes code (Remote Control X):
begin to blink and the opener lights will flash once. , . h 1. With the bottom side uo, press and hold both push elease the remote push button. buttons until the yellow indicator light begins to blink. It will Now the opener will operate when the left push button is blink for 30 seconds; during this time it is in learn mode. pressed. 2. While it is in leam mode, hold both transmitters back to back with the FCC labels touching, then Adding a remote can also be done from the door control, as 3. Press and hald the Remote Contro/ X push button until the follows: qt 972LM indicator light blinks very rapidly, indicating it has 1. With the door closed, press and hold the left push button. leamed the code. (If Remote Control X is also a.872LM, you must press and hold its ight sandbutton.) 74 2. Press and hold the Light button on the door control. Now the device will operate when the right hand push button 3. Press and hold the door control push bar. is pressed. 4. After the opener lights lash, release all buttons This code will remain inside the remote contro/ until replaced Test by pressing the left remote push button. with a new code by repeating the above steps. TO ERASE ALL REMOTE CONTROL CODES Keep batteries away fram smail children. If swallowed, promptly notify doctor. FROM THE RECEIVER Press and hold the Smart button on the opener panel until The Remote Control Battery The lithium battery should the indicator light tums off (about 6 seconds). All transmitter codes inside the receiver are now erased. Then follow the produce power for up to 5 years. To replace battery, new battery steps above to re-program each remote control. 974-315LM Repiacement Parts Mode! 972C/ Security+ remote case, cover, scraw a ee V2032 Lithium batt 3 ium C5 ne cd pry open case as shown. replace Illus FviSvorciip .. 7 eee cette nee eae te ewe eee ean eee eeeeee 29C128 Insert battery positive side up. p FOR SERVICE DIAL OUR TOLL FREE NUMBER: Dispose of old battery 1-800-528-9131 property. 1997, Chamberlain Group Inc. 444A99NG All Rinhte Racarvad Printed in Mexico