FCC ID: HBWA2203A Remote Work Light

myQ SMART LED GARAGE LIGHT Model 837LMMC, 837LA, MYQLED2MC, 002-2457MC, 002-2458MC, 002-2461MC Installation The myQ Smart LED Garage Light is designed to plug directly into a standard 120V outlet. Select an appropriate location on the ceiling or wall to mount the light within 6 feet

(1.83 m) of an electrical outlet so that the cord and light are away from moving parts. NOTE: If installing light on drywall and a ceiling joist cannot be located, use the drywall anchors provided. No pilot hole is required for drywall anchors. 1. 2. 3. 4. With the smart light lens open, hold the device up to the surface of the desired mounting location within 6 ft. from the electrical outlet. Mark screw hole locations on the mounting surface with a pen or pencil (Figure 1). If mounting to a wooden joist, use a 1/8 bit to drill pilot holes at marked locations. OR Screw in the provided drywall anchors at marked mounting locations. Determine the length of power cord needed to reach the nearest outlet. Wind any excess cord around cord retainer on the top side of the smart light base. Route the cord through the channel so that the light is flush when mounted. Line up the smart lights screw holes with the marked mounting locations, insert the provided screws into the mounting guide holes, and screw in the smart light. 5. Close the smart light lens. 6. Plug in the smart light to the outlet. NOTE: The LED light is very bright and will blink while programming. DO NOT stare at the light while on a ladder. Programming PROGRAM A DOOR OPENER/OPERATOR TO THE myQ SMART LED GARAGE LIGHT 1. Press the LEARN button on the smart light until the green LED turns ON (Figure 2). 2. Do one of the following operations (Figure 3):

Press the LEARN button on the door opener/operator. OR Press the LEARN button on the door control twice. OR On an LCD Smart Control Panel, go to Menu > Program> myQDevice. OR Using the myQ App, go to Menu > Program > myQ Device. 1. Open myQ app 2. Press your myQ account (icon at upper left screen) to open account settings. 3. Press Device Management to display the provisioned GDOs. 4. Press your GDO (under Hubs) to pair to your Smart LED Garage Light. 5. Press Add New (under Devices/Sensors paired to this Hub) to see list of device list. 6. Press Smart LED Garage Light to add this new device and follow the steps to pair the Smart LED Garage Light. 7. After pressing the learn button on the Smart LED Garage Light, Press Next to finish. The Smart LED Garage Light will blink once to confirm that it was successfully paired. The device has been learned when the smart light blinks once. Once paired, the Smart LED Garage Light is added to your myQ account as an accessory. PROGRAM A SECURITY+ 2.0 REMOTE CONTROL TO THE myQ SMART LED GARAGE LIGHT 1. Press the LEARN button on the smart light until the green LED turns ON (Figure 2). 2. Press the button on the remote control that you wish to operate the smart light. To reduce the risk of SEVERE INJURY or DEATH:

LEARN Button This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet ONLY one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT alter the plug. Light is intended for indoor ceiling or wall mount applications ONLY. Cord Retainer Channel Drywall Anchors LEARN Button LEARN Button 880LMW OR Light Lens Screws Figure 1 Door Opener/Operator LEARN Button LEARN Button LCD Smart Control Panel OR LEARN Button 3. The device has been learned when the smart light blinks once. To program the smart light with another accessory, refer to the manual for your accessory. Figure 2 TO ERASE ALL PROGRAMMING FROM THE myQ SMART LED GARAGE LIGHT Press and hold the LEARN button on the smart light until the green LED turns off (6-10 seconds). All programming is now erased. Maintenance Unplug the smart light before cleaning. Use a lightly dampened cloth for cleaning. DO NOT use liquid cleaners on the light lens. Figure 3 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. FCC statements:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be Installed and operated with minimum distance 20cm between the radiator & your body. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. IC statements:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L exploitation est autorise aux deux conditions suivantes :

1) Lappareil ne doit pas produire de brouillage;

2) L appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. DCLARATION DIC SUR LEXPOSITION AUX RADIATIONS:

Cet quipement respecte les limites dexposition au rayonnement RF IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20cm entre le radiateur et votre corps.

Portable LED Luminaire 837LA 24Vdc 0.6A 1000 lm 4000K

CAN ICES-3 (B)/NMB-3(B) 132-3478-000 132-3472-000 3.25 .622 60508 21 June 2023

C5266091_X24_Ed.2 Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization for Applicant Company name:

Grantee code:

FCC ID:

Contact Name:

Address:

Telephone No:

Fax No:

Email:

FRN: 0004301545 Chamberlain Group LLC, The HBW HBWA2203A Thomas Desilvia 300 Windsor Dr, Oak Brook, Illinois United States 60523 1-630-993-8618 1-630-516-6863 tdesilvia@chamberlain.com i. ii.

(the applicant) certifies that

[Chamberlain Group LLC, The]

the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Chamberlain Group LLC, The] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification. Chamberlain Group LLC, The certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Date: 11.16.2023 Applicants Name: Thomas Desilvia Title: Director Corporate Compliance Signature:

1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

C5266091_X10_Ed.2

<Chamberlain Group LLC, The>

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-11-16 Subject: Request for Confidentiality FCC ID: HBWA2203A To Whom It May Concern, to the provisions of Sections 0.457 and 0.459 of Commission's rules Pursuant

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality NOTE 2 No No No No NOTE 1 NOTE 1 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ___ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:Thomas Desilvia Title:Director Corporate Compliance 1/1

The Chamberlain Group, LLC Declaration on model difference FCC ID: HBWA2203A IC: 2666A-A2203A HVIN: 837LMMC Model: 837LMMC, 837LA, MYQLED2MC, 002-2457MC, 002-2458MC, 002-2461MC We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; the only differences are the appearance trade name and model no. for trading purpose.

The above appearance is for silk-screen only. Trade name Production name Remote Work Light Remote Work Light Remote Work Light LiftMaster myQ Raynor Remote Work Light Chamberlain Model no. 837LMMC, 837LA, 002-2457MC MYQLED2MC 002-2458MC 002-2461MC Due to marketing, they are the same product, and just have the different model name, the rest are the same. So they share the same HVIN: 837LMMC. The HVIN represents the unique identification code of the product, and the same HVIN is the same product. Confirmed by Thomas Desilvia Authorized Signature:

Date:

2023.09.19 Page 1 of 1 page

C5266091_X8_Ed.1 Letter of Authorization

<Chamberlain Group LLC, The>

Company: Chamberlain Group LLC, The Address: 300 Windsor Dr, Oak Brook, Illinois United States 60523 Product Name: Remote Work Light Model Number: 837LMMC, 837LA, MYQLED2MC, 002-2457MC, 002-2458MC, 002-2461MC FCC Identifier: HBWA2203A We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: Thomas Desilvia Date: 2023/11/16 Title: Director Corporate Compliance Signature of applicant:

1/1

US Agent for Service of Process LETTER OF ATTESTATION TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: Chamberlain Group LLC, The FRN: 0004301545 Contact Name: Thomas Desilvia Address: 300 Windsor Dr, Oak Brook, Illinois United States 60523 Telephone No: 1-630-993-8618 Email: tdesilvia@chamberlain.com Applicant:

Company name: Chamberlain Group LLC, The Product Description: Remote Work Light Grantee code:

FCC ID:

FRN Contact Name:

Address:

Telephone No:

Email:

HBW HBWA2203A 0004301545 Thomas Desilvia 300 Windsor Dr, Oak Brook, Illinois United States 60523 1-630-993-8618 tdesilvia@chamberlain.com

[Chamberlain Group LLC, The] certifies that, as of the date of this filing of the application with the TCB, [Chamberlain Group LLC, The] is our designated US agent for service of process for the above referenced FCC ID. [Chamberlain Group LLC, The] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Chamberlain Group LLC, The] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Date: 2023/11/16 Applicants Name: Thomas Desilvia Title: Director Corporate Compliance Signature:

US Agents Name: Thomas Desilvia Title:Director Corporate Compliance Signature:

1/1