FCC ID: RNE00515TX Digital Freezer /Refrigerator Thermometer

Instruction Manual Digital Refrigerator/Freezer Thermometer model 00515 CONTENTS Unpacking Instructions ........... 2 Package Contents .................. 2 Product Registration ............... 2 Features & Benefits: Sensors

... 2 Features & Benefits: Display

.... 3 Setup .................................... 4 Install or Replace Batteries...... 4 Temperature Units .................. 4 Placement Guidelines ............. 5 Using the Thermometer ........... 6 Troubleshooting ..................... 7 Care & Maintenance .............. 8 Specifications

......................... 8 FCC Information .................... 8 Customer Support .................. 9 Warranty............................... 9 Questions? Contact Customer Support at www.AcuRite.com/support or email support@chaney-inst.com SAVE THIS MANUAL FOR FUTURE REFERENCE. Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove. Package Contents 1. Display 2. Wireless Sensors (2) 3. Instruction Manual IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE Register online to receive 1 year warranty protection PRODUCT REGISTRATION www.AcuRite.com For versatile mounting options. 1. Refrigerator Sensor 2. Freezer Sensor 3. Suction Cup / Shelf Clip 4. A-B-C Switch 5. Battery Compartment 6. Wireless Signal Indicator ID code that must match displays A-B-C switch to ensure units synchronize. Flashes when data is being sent to the display. Features & Benefits: Sensors 3 6 1 4 5 3 6 2 4 5 2 Features & Benefits Display 8 6 5 4 3 7 2 1 9 11 10 5 12 13 14 For alarm setup preferences. For setup preferences and to view all-time records. 1. & Buttons 2. SET Button 3. Freezer Sensor Signal Strength 4. Freezer Sensor Low Battery 5. Wireless Signal Indicators 6. Alarm ON Indicator 7. Min/Max Records Highest and lowest temperatures from the past 24 hours. Flashes when sensor has lost signal from display. Indicator Temperature 8. Freezer Sensor Current Temperature

& Buttons 9. For alarm and records settings. 10. Refrigerator Sensor Current 11. Display Low Battery Indicator 12. Refrigerator Sensor Low 13. Refrigerator Sensor Signal 14. Button For alarm setup preferences. Battery Indicator Strength 18 19 17 15 16 20 21 19 3 Select between degrees Celsius or Fahrenheit. 15. Fold-out Stand 16. Battery Compartment 17. C/F Button 18. Integrated Hang Hole 19. Magnet Mount 20. A-B-C Switch 21. Battery Compartment Cover ID code that must match sensors A-B-C switch to ensure units synchronize. For easy wall mounting. SETUP Install or Replace Batteries AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. The freezer sensor requires lithium batteries for low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the freezer sensor for temperatures below -4F / -20C. Thermometer Display 1. Lift up the battery door and slide off the battery compartment cover. 2. Insert 3 x AA batteries into the battery compartment. Follow the polarity (+/-) diagram in the battery compartment. 3. Replace the battery cover. Sensors 1. Slide off the battery compartment covers, located on the front of the units. 2. Insert 2 x AA batteries into the battery compartment. Follow the polarity (+/-) diagram in the battery compartment. 3. Replace the battery cover.

-40F (-40C)

(37C) 100F

-4F (-20C) (37C) 100F Select Degrees Fahrenheit or Celsius To select between degrees Fahrenheit (F) or Celsius (C) temperature units, press and release the C/F button, located on the back of the thermometer display. PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS. BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals. 4 Display Placement Place display in a dry area free of dirt and dust. Display is magnet mountable and has a fold-out stand for tabletop use. For wall mounting, hang using the keyhole located on the back of the unit. Sensor Placement Both sensors will work in either the refrigerator or freezer, however the default alerts are set based on the sensor's indicated use (see page 2). Each sensor is equipped with a silicon band to securely attach to a wire shelf. Each sensor also includes a detachable suction cup that can be used to attach the sensor to the interior surface of the refrigerator. Please note: suction cups do not adhere well to freezing surfaces. Display and sensors must be located within 75 ft (23 m) of each other. 5 OPERATION Using the Thermometer High & Low Records The thermometer displays high and low temperature records for all-time and the past 24 hours (rolling). All-time records reflect the highest and lowest temperatures recorded since the batteries were inserted or the records have been cleared. High and low records for the past 24 hours are shown on the display, by default. Press and the release the or button to view all-time records. If no buttons are pressed for 5 seconds, the display will return to normal operation mode. To clear the high records, press and hold the button for 5 seconds while viewing the record you wish to clear. To clear the low records, press and hold the button for 5 seconds while viewing the records you wish to clear. Dashes display to confirm you have cleared the record(s). Programmable Alarms Programmable alarms notify you audibly and visually when temperatures exceed your preset minimum / maximum temperature range. An alert is triggered when a temperature is out of range for longer than 5 minutes. This prevents false alarms due to the fridge/freezer door being held open while new items are being loaded/unloaded. To enable alerts for both sensors, press and hold the button for 5 seconds until is shown next to the current temperatures. To enable alerts for a select sensor, press the or button first, then press the button once to enable alarm. Disable the alarms at any time by following the same steps until is shown next to the current temperature. The default temperature alarm settings for the refrigerator thermometer are minimum 33F / maximum 40F. The default temperature alarm settings the freezer thermometer are minimum -20F / maximum 32F. To customize temperature alarms:

1. Select the sensor you want to customize by pressing the or button. 2. Press and release the SET button; the minimum temperature alarm setting will blink. 3. Press the or button to increase or decrease the minimum temperature alarm setting. 4. Press the SET button to confirm the minimum temperature alarm setting. 5. Press the or button to increase or decrease the maximum temperature alarm setting. 6. Press the SET button to confirm the maximum temperature alarm setting. NOTE: When thermometer is in normal operating mode (not in alarm setup mode), the min/max readings display the highest/lowest temperatures from the previous 24 hours. 6 Troubleshooting Temperature is showing dashes Inaccurate temperature Display screen not working Relocate the display and/or the sensors. The units must be within 75 ft (23 m) of each other. Flashing of the temperature is generally an indication of wireless interference. Perform a hard reset to gain a strong connection between the units:

1. Bring all 3 units together, side-by-side. 2. Remove all batteries from all 3 units. 3. Reinstall batteries in thermometer display first. 4. Reinstall batteries into sensor #1. 5. Reinstall batteries into sensor #2. 6. The display should read temperatures from both sensors almost instantly. Use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4F/-20C). Do not use heavy duty or rechargeable batteries. Check that the batteries are installed correctly. Batteries may need to be replaced. Verify youre within the measurable temperature range (-40.0F to 99.0F; -40.0C to 37.2C). If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or email support@chaney-inst.com for assistance. 7 Care & Maintenance Clean with a soft damp cloth. Do not use caustic cleaners or abrasives. DISPLAY OPERATING TEMPERATURE RANGE SENSOR TEMPERATURE RANGE WIRELESS RANGE WIRELESS FREQUENCY POWER DATA REPORTING

-40.0F to 99.0F; -40.0C to 37.2C

-40F to 158F; -40C to 70C 75 ft / 23 m

(signal range is impacted by sensor location and may vary) 433.92 MHz Display: 3 x AA alkaline batteries Refrigerator and Freezer Sensors:

4 x AA alkaline or lithium batteries 60 second updates FCC Information FCC Information This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation. users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 8 Customer Support AcuRite customer support is committed to providing you with best-in-

class service. For assistance , please have the model number of this product available and contact us in any of the following ways:

support@chaney-inst.com Visit us at www.AcuRite .com Installation Videos Instruction Manuals Replacement Parts Register your Product Support User Forum Submit Feedback & Ideas IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE Register online to receive 1 year warranty protection PRODUCT REGISTRATION www.AcuRite.com Limited 1-Year Warranty AcuRite is a wholly owned subsidiary of Chaney Instrument Company. For purchases of AcuRite forth herein. For purchases of Chaney products, Chaney We warrant that all products we manufacture under this warranty are of good material and workmanship and, when properly installed and operated, will be free of defects for a period of one year from the date of purchase. Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by us, and at our sole option, be repaired or replaced by us. Transportation costs and charges for returned goods shall be paid for by the purchaser. We hereby disclaim all responsibility for such transportation costs and charges. This warranty will not be breached, and we will give no credit for products which have received normal wear and tear not affecting the functionality of the product, been damaged (including by acts of nature), tampered, abused, improperly installed, or repaired or altered by others than our authorized representatives. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). If we determine that repair or replacement is not feasible, we may, at our option, refund the amount of the original purchase price THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY FOR THE PRODUCTS AND IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. We expressly disclaim all liability for special, consequential, or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. We further disclaim liability from personal injury relating to our products to the extent permitted by law. By acceptance of any of our products, the purchaser assumes all liability for the or corporation is authorized to bind us to any other obligation or liability in connection with the sale of our products. to modify or waive the terms of this warranty unless done in writing and signed by a duly authorized agent of ours. In no case shall our liability for any claim relating to our products, your purchase or your use thereof, exceed the original purchase price paid for the product. Applicability of Policy This Return, Refund, and Warranty Policy applies only to purchases made in the United States and Canada. For purchases made in a country other than the United States or Canada, please consult the policies applicable to the country in which you made your purchase. Additionally, this Policy applies only to the original purchaser of our products. We cannot and do not offer any return, refund, or warranty services if you buy products used or from resale sites such as eBay or Craigslist. Governing Law This Return, Refund, and Warranty Policy is governed by the laws of the United States and the State of Wisconsin. Any dispute relating to this Policy shall be brought exclusively in the federal or State courts having jurisdiction in Walworth County, Wisconsin; and purchaser consents to jurisdiction within the State of Wisconsin. 9 Weather Stations Temperature

& Humidity Weather Alert Radio Kitchen Thermometers

& Timers Clocks Its more than accurate, its AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence. www.AcuRite.com Printed in China 00515 INST 011620 Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy-

rights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details.

Scale 1:1 Scale 4:1 Silk Screen Color: Black Scale 1:1 Scale 4:1 A B C 1

. 5 V

A A

U M 3

) Scale 4:1 A B C 1

. 5 V

A A

U M 3

) 1

. 5 V

A A

U M 3

) Scale 1:1 1

. 5 V

A A

U M 3

Declaration of Authorization We Name: Chaney Instrument Co. Address: Flat 09,19/F.,Metro Centre Phase I, 32 Lam Hing Street, Kowloon Bay City: Kowloon, Hong Kong State: N/A Country: China Declare that:

Name Representative of agent: Ms. Mandy Wang Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):

Product description: Digital Freezer /Refrigerator Thermometer Type designation: 00515TX Trademark: ACURITE FCC ID: RNE00515TX on our behalf. Date: 2020-01-10 City: Kowloon, Hong Kong Name: Victor Mak Function: Project Manager - Digital Products Signature: . Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048

<2020-01-10>

TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID RNE00515TX For the product stated above, we request that the following information be held confidential;

00515TX Model name Long-Term Short-Term Confidentiality Short-Term Confidentiality Days Confidentiality Exhibits External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Signed:

Name: Victor Mak Company: Chaney Instrument Co. Address: Flat 09,19/F.,Metro Centre Phase I, 32 Lam Hing Street, Kowloon Bay, Kowloon, Hong Kong, China Phone: +852-35829826 Fax: +852-28890331 E-Mail: vmak@primexasia.com