es) be sete Hh Possible Solution Bad Wireless Sensor Reception J no bars Relocate the main unit and/or the wireless sensor. Both units must be within 145 feet
(50m) from each other. Make sure both units are placed at least 3 feet (.91 m) from other electronic appliances and devices that may interfere with the wireless communication
(such as TV's, microwaves, computers etc). NOTE: It may take up to 20 minutes for the main unit to ressynchronize with the sensor when batteries are replaced. Use lithium batteries in sensor when temperature is below -4F (-20C). No Wireless Sensor Data
(ho communication) wie no bars and flashing l
, ia ." data If wireless reception is bad (no bars}, see Bad Reception section above. The wireless ID setting on each unit must match for all units to communicate properly. See Set Wireless ID on the next page. Display Console Screen Not Working Make certain that the batteries are installed correctly. Batteries may need replacing Please DO NOT return product to the retail store, For technical assistance and product return information, please call a Customer Care: 877=221=1252 Mon. - Fri, 7:00 A.M. to 7:00 BM, [CST]
vA A oa ene a Batteries: 4 x AA (not included) Lithium Batteries Recormmended in oor Sensor if temperatures are below -4F fn ee:SCisS Measurement Ranges Outdoor Temperature: -40F to 158F
-40C to 70C Outdoor Humidity: 1% to 99%
Indoor Temperature: 32F to 122F OC ta 50C Indoor Humidity: 1% to 99%
Wireless Range: 145 ft (50m MAX Depending on home construction materials IMPORTANT NOTICE Have questions about product setup or operation? We're here to help!
24/7 Support: {| www.acurite.com _ ) Product Setup & Demo Videos Register your Product Product Manuals Support Forum Frequently Asked Questions Submit Feedback & Ideas EMAIL:
info@chaney-inst.com TOLL FREE:
(877) 221-1252 7:00 am. = 7200 pm, CST i=-Year Warranty Mm Mts ce elma oie a oe cl mes T |
| PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
: _ BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remowe batteries from equipment which is not ta be used for an extended perid of time. Follow the polarity (#/-) diagram in the battery compartment. Promply remove dead batteries from the device. Dispose of used batteries property, Only betteries of the same or equivalent type as recommended are to be used. DO WOT incinerate used batteries. 00 WOT dispose of batberies im fire, as batteries may explode or leak 00 WOT mix old and new betteries or types of batteries
(alkaline/standard), DO MOT use rechargeable batteries. DO NOT recharge nor-rechargeable betteries, DO NOT short-circuit the supply terminals, 6