FCC ID: 2BECE-C5 Motorcycle Driving Recorder

Dear users:

shalom! Thank you very much for choosing our series of products! To ensure your better use of this product, read this manual before use. In order to avoid you in the process of using the product, please try to use the original parts! Due to the different production date and batch, the manual and the actual product may be slightly different, the specific use, please refer to the physical object!

major function During driving, the front and back pictures and sound of the recorder are recorded Sudden power failure, Micro memory card removal and other abnormalities, the current video can be fully recorded. Allowable input operating voltage range: DC 5V~12V. Allowable input operating voltage range: DC 5V~12V. Product installation instructions Tips: For safe installation, please install on the motorcycle after the motorcycle turns off the engine. 1It is recommended to put it in the storage box (as shown) and installed around the vehicle dashboard

(shown) 2Connect the power cord to one of the motorcycle headlights, keys and battery. Note 1Adjust the lens position to ensure that the lens is in level with the ground Note 2Note the lens to adjust the screen on the display screen to appear normally Camera B Camera F F controller stand Key operation instructions Function 1 Long3 seconds to power on and off Function 2 shortStart video recording and stop video recording Function 3 Determine the key Function 1 selection key Function 2 Close the video surface and open the microphone Function 1 selection key Function 2 Shadow interface in front of the surface cutting Function 1 Short press to enter the function menu setting Function 2 Long press for 3 seconds to enter the video playback mode Function 3 Playback modeShort press return Blue linght Often brightvideo twinkleRecord file with lock Red linght Boot indicator light Blue linght Often brightvideo extinctstop recording Red linght Often brightno camera twinkleSD full Short press lock Long press shoot Display of the screen before and after the switch Host indicator light Memory card slot Memory card Support 8-128GB Calss 10 TF Open wificlose wifi Common problem description 1 machine can't turn on?

A the dielectric surface of the power source;

B please confirm whether the power supply of the motor vehicle is normal. C take out the TF card and confirm if it is TF. 2. Can not be displayed on your head?

A verify that the product is working properly;

B check whether the interface of the image head is connected;

C take out the TF card and confirm if it is TF. Three, do you think you're going up and down?

A poor interface contact;

B the fixed support. 4, during the process of recording the screen suddenly turned off the backlight is what?

A set screen (b) Time-preserving or dormant;

B screensaver can wake up via a power key. 5, the recorded document on the computer to play the card or ink?

A replacement of audio and video playback software for playback;

The speed of B card is too low. It is recommended to use TF card above C10 speed. Description of exemption The audio and video information provided by this product is for reference only; the video records are kept by the customers themselves; the company will not be legally liable for the audio and video records information provided by the product!

WiFi version 1 Scan the QR code below,Install APPviidure&roadcamIt is recommended to useviidure viidure roadcam User nameDVR_*******

Password12345678 The app can be downloaded and installed by mobile phone / vehicle, and can be connected with recorder. Note:

Some setting functions in app cannot be used. FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Page 1 of 1 FCC ID: 2BECE-C5 LABEL AND LOCATION Motorcycle Driving Recorder Model: C5 FCC ID: 2BECE-C5

(Size: L2.0cm x 3.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Changtong Zhichuang Technology (Shenzhen) co., ltd Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 1/17/2024 Changtong Zhichuang Technology (Shenzhen) co., ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BECE-C5):

Name and company of U.S. agent:

FCC US Agent, LLC Physical U.S. address of agent:

3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent:

0033402884 Email address of U.S. agent:

Support@FCCUSAgent.com FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Changtong Zhichuang Technology (Shenzhen) co., ltd. Changtong Zhichuang Technology (Shenzhen) co., ltd with the FRN 0034686550 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Meng Meng Sun Manager Changtong Zhichuang Technology (Shenzhen) co., ltd Signature Tim Payne Manager FCC US Agent, LLC 5 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID 2BECE-C5 Model name C5, C2, C3, C4, C6, C8, C9, C11, C12, C15, C16 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

the Operational Description the Block Diagram the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-01-17 Name / Title: Mengmeng Sun / Manager Company: Changtong Zhichuang Technology (Shenzhen) co., ltd Address: Room 101, Building C, No.6 Hexi Xincun, Guancheng Community, Guanhu Street, Longhua District, Shenzhen 518000, China Phone: +86-755-82591330 Fax: N/A E-Mail: ctzckj2023@163.com

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commissions Rules (47 C.F.R.) we attest as follows:

We, applicant Address:

Company Name: Changtong Zhichuang Technology (Shenzhen) co., ltd Room 101, Building C, No.6 Hexi Xincun, Guancheng Community, Guanhu Street, Longhua District, Shenzhen 518000, China Phone: +86-755-82591330 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. FCC ID: 2BEE4-F160C If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-01-17 Name / Title: Mengmeng Sun / Manager Company: Changtong Zhichuang Technology (Shenzhen) co., ltd Address: Room 101, Building C, No.6 Hexi Xincun, Guancheng Community, Guanhu Street, Longhua District, Shenzhen 518000, China Phone: +86-755-82591330 Fax: N/A E-Mail: ctzckj2023@163.com

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:

FCC ID 2BECE-C5 We, applicant Model name C5, C2, C3, C4, C6, C8, C9, C11, C12, C15, C16 Address:

Company Name: Changtong Zhichuang Technology (Shenzhen) co., ltd Room 101, Building C, No.6 Hexi Xincun, Guancheng Community, Guanhu Street, Longhua District, Shenzhen 518000, China Phone: +86-755-82591330 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-01-17 Name / Title: Mengmeng Sun / Manager Company: Changtong Zhichuang Technology (Shenzhen) co., ltd Address: Room 101, Building C, No.6 Hexi Xincun, Guancheng Community, Guanhu Street, Longhua District, Shenzhen 518000, China Phone: +86-755-82591330 Fax: N/A E-Mail: ctzckj2023@163.com

Changtong Zhichuang Technology (Shenzhen) co., ltd WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2BECE-C5 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-

location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code

(MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Mengmeng Sun / Manager Signature:

Phone: +86-755-82591330 Email: ctzckj2023@163.com Date: 2024-01-17 Page 1 of 1 Rev.2.0

Changtong Zhichuang Technology (Shenzhen) co., ltd Room 101, Building C, No.6 Hexi Xincun, Guancheng Community, Guanhu Street, Longhua District, Shenzhen 518000, China Date: January 17, 2024 FCC ID: 2BECE-C5 Model Number: C5, C2, C3, C4, C6, C8, C9, C11, C12, C15, C16 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Changtong Zhichuang Technology (Shenzhen) co., ltd hereby declare that our product (Motorcycle Driving Recorder) Model Number: C5, C2, C3, C4, C6, C8, C9, C11, C12, C15, C16 board, Schematic, Hardware version, Software version, structure and internal photos are same, named and appearance differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name/Title: Mengmeng Sun / Manager Company: Changtong Zhichuang Technology (Shenzhen) co., ltd Address: Room 101, Building C, No.6 Hexi Xincun, Guancheng Community, Guanhu Street, Longhua District, Shenzhen 518000, China Tel: +86-755-82591330 Fax: N/A E-Mail: ctzckj2023@163.com