FCC ID: 2AMV5-SK569-WU-AC Smart Power Strip

Instruction Manual of SK569-WU-AC Ver1.0

. Function 1. Product Feature SK569-WU-AC is an American standard WiFi smart power strip ( 3 independently outlets +2 USB (Type A+C ) , which can be controlled by APP and remote. Equipped with remote control function,count down function and timer function. 2. Product Picture

. Product Parameter Appearance Model#

Dimension Product color Product Weight Parameter Input Voltage Power Load USB SK569-WU-AC 265**60*31MM (not contains the length of power cord, 3ft power cord) White About 490g 125Vac/60Hz 15A Max. 1875W resistive 8A Max. 1000W tungsten 5V, 3.4A Support protocol: 802.11 b/g/nchannel:

1-14@2.4GHz WiFi Parameter Support safety mode: WPA/WPA2 Standby Power Consumption 0.5W Mobile Phone System Android 4.4 and above iOS 8.0 and above

. Using Instruction 1. SK569-WU-AC is an American standard WiFi smart power strip ( 3 independently outlets

+2 USB A+C ). The main function is to control the on/off and set timing via APP. Before using the device's functions, you need to pairing the WiFi firstly, namely, product can connect to the Internet through WIFI, which can be a router or a mobile hotspot. 2. There is a button with indicator on the housing. 1) Click the button--turn on/off the power strip, the blue indicator light will light up when it is on and off when it is off;

2) Long press-- enter into the EZ pairing mode, the indicator will flash quickly and then connect to the network according to the EZ pairing steps. 3) Long press again when the indicator flash quickly and then enter into AP pairing mode. When the indicator flash slowly, then connect to the network according to the AP pairing mode. FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator

& your body.

SMART POWER STRIP 15A Max. 1875W resistive Model SK569-WU-AC Input Voltage 125VAC/60Hz Power Load 8A Max. 1000W tungsten FCC ID2AMV5-SK569-WU-AC USB: 5V 3.4A Made in China 4007799

- Changxing Potek Electronics & Technology Co., Ltd. -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 7/20/23

[Changxing Potek Electronics & Technology Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [2AMV5-SK569-WU-AC]):

Name and company of U.S. agent: Linkwld LLC Physical U.S. address of agent: 1942 Broadway St. STE 314C, Boulder, CO, 80302, US FRN of U.S. agent: 0033625682 Email address of U.S. agent: Timothy.linkwld@proton.me

[Linkwld LLC] acknowledges their obligation to accept service of process on behalf of [Changxing Potek Electronics & Technology Co., Ltd.].

[Changxing Potek Electronics & Technology Co., Ltd.] with the FRN [0026676114] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature

[Name] Fiona Wen

[Title] Sales V.P. 4 0 V

[Company] Changxing Potek Electronics & Technology Co., Ltd.

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature

[Name of U.S. agent] Timothy Zhu

[Title of U.S. agent] Manager

[Company of U.S. agent] Linkwld LLC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

Changxing Potek Electronics & Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/24/23 To whom it may concern:

We, [Changxing Potek Electronics & Technology Co., Ltd.], hereby certify that the equipment for which authorization is sought

(FCC ID:

[2AMV5-SK569-WU-AC]) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, Signature

[FIONA WEN]

[SALES V.P]

[Changxing Potek Electronics & Technology Co., Ltd.]

The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.