Tx225-8-A User Manual V1.0 V1.0 20200611 Function TX225-8-A TOUCH 8 RF LST04-WR strip light of LST04-WR. TX225-8-A is a TOUCH series RF transmitter with 8-keys . It's convenient to use with The product icon Product Parameter Outward Appearance Product model TX225-8-A Product size Product Color 33*66.5*10.8mm White Product weight 16.9g Product Parameter Power Supply Average standby power consumption 20uA 3V CR2032 button battery RF RF Parameter FSK915Mhz >30M remote distance Using instruction 1. RF The instructions of RF learning configuration TX225-8-A LST04-WR TX225-8-A can match with strip light controller of LST04-WR to use. 1. Connecting the strip light and controller to power on 2. LST04-WR 30S , TX225-8-A ON/OFF Press the first group of ON&OFF buttons repeatedly within 30S after the controller LST04-WR was powered on. 2. LST04-WR If the LST04-WR can be controlled,then connect successfully. 4. It can achieve remote control the switch, color selection and mode functions. 2. TX225-8-A The instruction of buttons function for TX225-8-A ON Turn on the strip light OFF Turn off the strip light UP When the strip light change to white light,the brightness strengthen. DOWN When the strip light change to white light,the brightness weaken. MODE1 MODE2 RGB MODE3 CLEAR:
Flashing mode Strobe mode Breathing mode Clearing the code RF RGB Through RF to select the RGB. FCC STATEMENT :
two conditions:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving an tenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.