LST04-WR User Manual V1.1 V1.0 V1.1 2020.05.1 2020.05.1 6 6 Function summary LST04-WR is an RGB+W light belt that supports mobile phone WIFI communication and RF remote control. It is a smart light belt with functions such as scene mode, dimming and toning, white light mode, and timing. The product suit icon 24V/1ADC DC TYPE_C DC 24V 1pcs 5 meter light strip+1 pcs 24V/1A power adaptor+1pcs controller (type C connect the light strip, DC connector connect the power adaptor+1 pcs transmitter LED qty/meter 30pcs 5050 RGB LED/30pcs 2835 2700K LED 30PCS5050 /30PCS2835 Product parameters Model#
Size of light strip LST04-WR 10*5000mm 2700K10%
1100lm20%
80*29.1mm White
2835 2835 LED color temperature range The lumen value range of 2835 LED Size of controller product color Product Parameter
/ Power input voltage/current
/ Power output voltage/current AC 120v/60Hz0.3AMax) DC 24V,1A(Max) 802.11 b/g/n 1-14@2.4GHz WPA/WPA2 support 802.11 b/g/n WIFI channel 1-14@2.4GHz support WPA/WPA2 security protocols FSK 915Mhz, Remote control distance>30M 0.5WThe power supply parameters have been modified and the stand-by power consumption need to be reconfirmed iOS 8.0 iOS 8.0 and above Android4.4 WiFi WiFi parameter RF RF parameter stand-by power consumption Smartphone system requirements Android 4.4 and above Instructions for use Instruction of RF resync code and reset WIFI LST04-WR WIFI APP RF WIFI LST04-WR is an intelligent WIFI+RF light strip. The main functions are realized through APP and RF remote control. Before using the WIFI function of this device, the device needs to be added first. There is a button on the front of the housing of the product controller. There are two types operation of button: click and long press. Click the button to turn on/off the light strip. The light strip will be lightened when turn on and be EZ ;EZ AP ; AP-EZ ;
dark when turn off. WIFI When the light strip is turned off, long press the button on the controller, it will enter the pairing network mode. If not enter the pairing network mode, it will enter the EZ mode (universal mode). Continue to long press the button under the EZ mode to enter AP mode (pairing network under specified hot spot ); Continue to long press the button will switch between the AP-EZ mode; WIFI will be reset when the network have finished the pairing. When the light strip is turned on, long press the button on the controller, it will switch to RF 30S ON/OFF white light and adjust the brightness. RF pairing method: After the light strip power on, press the first row ON/OFF button on the transmitter repeatedly within 30 seconds. If the device is controlled, stands for the syncing is finished. LST04-WR Description of transmitter function:
ON turn on the light strip OFF turn off the light strip UP light strip switch to white light and the brightness increased DOWN light strip switch to white light and the brightness decreased. MODE1 flash mode MODE2 jump mode RGB MODE3 breathing mode RF RGB choose the RGB through RF 2. LST04-WR APP Description of APP function UI 1 UI 2 UI 3 Interface and function introduction 1APP UI1: Default status of open APP panel: you can turn on and off the light strip by switch. 2 UI 2: Palette panel, you can choose the color, brightness, dimming and other parameters. 3 UI 3: Scene mode selection panel, click it and enter to the corresponding scene pattern, Click edit to enter the setting interface of this scene mode Using Method
() APP download the APP APPSmartlinkPlus APP Use your phone to scan the below QR code to download the APP, or search for "SmartlinkPlus" to download and install the APP in the APP stores
() WIFI Connect the WIFI APP WIFI EZ APP +
APP Open the APP to register and login-----the smart phone should to connect the WIFI ------connect the light strip and controller and power it on----- long press the button on the controller to enter the EZ mode when the light strip is turned off------open the APP and click add device or +
on the top right corner to finish pairing network according to the reminder------choose the mode and color after the APP connect successfully.
() RF Connect RF transmitter 30S ON/OFF Connect the light strip and controller and power it on-----repeatedly press the first row ON/OFF button within 30S-----if the device is controlled, connect successfully----use the transmitter to choose ON/OFF, color, mode and other functions. FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.