Hand control User Manual
1. Performance parameter
Model
Voltage
Current
Keys
Protection class
Main material
RF
KDH231
4.5VDC(3AAA 1.5V battery)
MAX 50mA
21
IP 42
HIPS-2230
2420Mhz
Key 1: press button 1, flashlight lit; release button 1, flashlight
extinguished;
Key 2: press button 2 for 3 seconds , remember the current position
(cover before memory), while backlight flash 3 times, control box
buzzing 1 time;
1
After remembering the position, press button 2,
the bed switch to the current memory position;
Key 3: press button 3 , bed bottom lamp lit ; press
button 3 again, bed bottom lamp extinguished;
Key 4: press button 4 for 3 seconds, remember the current position (cover
before memory), while backlight flash 3 times, control box buzzing
1 time;
After remembering the position, press the button 4 and switch the
bed to zero gravity position;
Key 5: press button 5 for 3 seconds , backlight flash 3 times, key lock,
while press any key invalid, background light flash 2 times;
press button 5 for 3 seconds again, backlight flash 3 times, key
unlock, all keys return to normal function;
Key 6: press button 6 for 3 seconds, remember the current position (cover
the memory before), while backlight flash 3 times, control box
buzzing 1 time;
After remembering the position, press the button 6, the bed body
switch to stop snoring position;
Key 7: press button 7 for 3 seconds, remember the current position (cover
the memory before), while backlight flash 3 times, control box
buzzing 1 time;
After remembering the position, press the button 7, the bed body
switch to the viewing position;
Key 8: press button 8 for 3 seconds, remember the current position (cover
before memory), while backlight flash 3 times, control box buzzing
1 time;
After remembering the position, press button 8, the bed body
switch to BOOK position;
Key 9: press button 9,bed back rise;
Key 10: press button 10,bed leg down;
Key 11:press button 11,bed back down;
Key 12:press button 12,bed leg rise;
Key 13:press button 13, bed body lying flat;
Key 14: press button 14, bed back and legs rise at the same time;
Key 15:press button 15, bed back and legs down at the same time;
Key 16: short press button 16, head massage motor vibration enhancement.
It is divided into four;
Key 17: short press button 17 , 15 min indicator light work, vibration
motor working for 15 minutes to stop;
Press the button 17 again , 30 min the indicator light work, the
vibration motor continues to work for 30 minutes to stop; three
short press the button 17 on the third , 45 min indicator light
work, vibration motor work for 45 minutes after stopping;
Key 18: short press button 18, foot massage motor vibration enhancement.It
2
Key 19: short press button 19, foot massage motor vibration weakened, It
Key 20: short press key 20, switch vibration motor different modes. There
Key 21: short press key 21, head massage motor vibration weakened.It is
is divided into four files;
is divided into four files;
are four modes;
divided into four files.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. T
he device can be used in portable exposure condition without restriction.
3