MANUAL OF REMOTE CONTROL MANUAL OF REMOTE CONTROL A M Mo Tu We Th Fi Sa Su CONTENTS REMOTE CONTROL 1. Parameters 2. Install The Battery 1 2 REMOTE CONTROL PROGRAMMING 1. Enter Setting Mode 2-14. Motor Programming 3 4-12 CERTIFIED STATEMENT 1. FCC Statement 13 REMOTE CONTROL Remote Holder s x2 1. PARAMETERS Control All Blinds
(max 9 blinds) Open Slight Open Slight Open Knob Adjust the opening percentage Favorite Position Close Stop 1-9 Channel :
One channel corresponds to one blind. Example Operation:
If there are 9 blinds, and you want to open blinds 1, 3, and 5 together, the operation method is:
Press 1, 3, and 5 in sequence, and then press "Open". Back
Lithium Cell CR2450 3V P1 P2 P1 Button P2 Button 1 2. INSTALL THE BATTERY Your blind has been programmed before shipment. Please use it directly after installation.
Lithuim Cell CR2450 3V P1 P2
Lithium Cell CR2450 3V P1 P2
Lithium Cell CR2450 3V P1 P2
Lithuim Cell CR2450 3V P1 P2 INSTALL THE REMOTE HOLDER ON WALL Method 1 Back Method 2 s 2 PULLREMOVEBEFORE USE REMOTE CONTROL PROGRAMMING 1. ENTER SETTING MODE 01. 02.
Lithium Cell CR2450 3V P1 P2 Hold " P1 " for 5s Green light flashing indicates setting mode. Choose the channel you want to set from "1-9". It will exit setting mode if hold P1 for 5s again or no operation for 3 mins. 3 2. SET FAVORITE POSITION 1. The favorite position is not set at factory. 2. Before setting the favorite running position, please ensure that the top and bottom limit positions have been set. 3. Please ensure that the remote is in setting mode before following the steps below:
01. 02. Press " Channel 1 "
(Take channel 1 for example) Hold " " for 3s The motor responds. 3. DELETE FAVORITE POSITION Hold " " for 3s The motor responds. 4 4. HOW TO CHANGE UP/DOWN DIRECTION Please ensure that the remote is in setting mode before following the steps below:
Hold " Channel 1 " then Press " " for x1
(Take channel 1 for example) The motor responds. 5 5. HOW TO ADJUST SHADES RUNNING SPEED 1. Please ensure that the remote is in setting mode before following the steps below:
2. If the motor does not jog, it may have reached the maximum or minimum speed. There are three speed settings available. Add speed Hold " " for 3s The motor responds. Reduce speed Hold " " for 3s The motor responds. 6 6. DELETE TOP LIMIT POSITION Please ensure that the remote is in setting mode before following the steps below:
The motor responds. Hold " Channel 1 " then Press " " for x1
(Take channel 1 for example) 7. DELETE BOTTOM LIMIT POSITION Please ensure that the remote is in setting mode before following the steps below:
The motor responds. Hold " Channel 1 " then Press " " for x1
(Take channel 1 for example) 8. DELETE TOP & BOTTOM LIMIT POSITION 1. The favorite position will also be deleted. 2. Please ensure that the remote is in setting mode before following the steps below:
The motor responds. Hold " " for 3s 7 9. SET TOP LIMIT POSITIONS Please ensure that the remote is in setting mode before following the steps below:
01. Move the shade to the desired top limit position. 02. Hold " Channel 1 " then Press " " for x1
(Take channel 1 for example) The motor responds. 10. SET BOTTOM LIMIT POSITIONS Please ensure that the remote is in setting mode before following the steps below:
01. Move the shade to the desired bottom limit position. 02. Hold " Channel 1 " then Press " " for x1
(Take channel 1 for example) The motor responds. 8 11. UNPAIR THE MOTOR 1. All paired remotes on the current channel won't be able to control the motor after the step. 2. Please ensure that the remote is in setting mode before following the steps below:
Hold " " for 3s then Press " " for x1
(Take channel 1 for example) The motor responds. 9 12. RE-PAIR THE MOTOR Please ensure that the remote is in setting mode before following the steps below:
Hold the motor button for 2s The motor responds.
Lithium Cell CR2450 3V P1 P2 Press " P2 " x1
Lithium Cell CR2450 3V P1 P2 Press " P1 " x1 01. 02. 03. 10 13. ADD NEW REMOTE "B"
Please ensure that the remote is in setting mode before following the steps below:
01. 01. Paired remote "A"
A Hold " Channel 1 " then Press " " for x1
(Take channel 1 for example) The motor responds. 02. B 03. B 04. B Ensure that the unpaired remote "B" has entered setting mode. Choose the channel you want to set from 1-9. Please refer to Page 3 for this step. The motor responds.
Lithium Cell CR2450 3V P1 P2 Press " P2 " x1
Lithium Cell CR2450 3V P1 P2 Press " P1 " x1 11 14. KNOB FUNCTION Please ensure that the remote is not in setting mode before following the steps below:
If it's in setting mode, please refer to page 3 to exit setting mode. ADJUST THE OPENING PERCENTAGE 01. 02. Rotate clockwise Press " Channel 1 "
(Take channel 1 for example) The shade moves down. The shade moves up. Rotate counterclockwise 1. At each rotation, the current black mark is the initial position. 2. Rotate it for one cycle, and the shade will open by 40%. DOT MOVE The shade moves up or down 1-2 grids. Rotate 1-2 grids For Shangri-la Shades, please move the shade to bottom limit position and rotate the knob 1-2 grids to achieve dimming function. 12 CERTIFIED STATEMENT 1. FCC STATEMENT FCC ID: 2A9IA-GR-09-01 Please take attention that changes or modification not expressly qpproved by the party responsible for compliance could void the user's quthority to operate the equiipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmfu linterference, and.
(2) This device must accept any interference received, including interference that may cause undesired operation. 13