UA-28SE Retractable Stereo Headset User Manual Contents
............ 3
............ 4
............ 5
............ 6
............ 7-9
............ 10
............ 11 Components UA-28SE Overview Retractable Mechanism How to Wear Your Headset Charging Your Headset Getting Started Pairing Your Headset with a Bluetooth wireless technology enabled device Pairing Your Headset with Two Bluetooth wireless technology enabled devices (Multi-point) ............ 12
............ 13 Reconnecting Your Headset
............ 14-17 Using Your Headset
............ 18-19 Listening the music
............ 20-21 Troubleshooting
............ 22 Safety Precautions
............ 23 Maintenance
............ 24 Declaration of Conformity FCC Compliance Statement
............ 24-25
............ 11 V4.0 Bluetooth Bluetooth Operating Distance:
Operating Temperature:
Charging Time*:
Talk Time*:
Music Time*:
Standby Time*:
Battery Type and Capacity:
Dimension:
Weight:
HFP v1.6 wideband speech (HD voice ready), HSP v1.2, A2DP v1.2, AVRCP v1.4 10 meters with no obstructions 0-50 degree celsius Around 1.5 hours Up to 7 hours Up to 6 hours Up to 240 hours Rechargeable Li-Polymer 100mAh 55(L) x 25.5(W) x 15(H) mm 21g
*May be varied by mobile phone settings and operator 3 Components Thank you for choosing the iXchange UA-28SE Retractable Stereo Bluetooth Headset. We hope you enjoy it! Inside the package, you should find:
1 UA28SE headset 1 USB saver charger 1 USB Cable 1 Neck Strap 1 Earphone cable with the micro USB plug 1 Micro USB / 3.5mm female plug connector 1 Manual 1 Pouch 2 set L/S inear cushion 4 UA-28SE Overview 1 2 3 1. Rewind Button 2. Status Indicator 3. Multi-function Button (MFB) 4. Volume Button 5. Microphone 6. Earpiece 7. Clip 8. Micro USB Charging Socket 9. Neck Strap hole 6 7 5 4 9 8 5 Retractable Mechanism The earpiece cord can be extended by gently pulling on the cord. The cord can be retracted (shortened) by pressing the Rewind Button. PULL PRESS 6 How to Wear Your Headset UA-28SE is designed, A. to clip onto your clothing, or 7 How to Wear Your Headset (contd) B. fasten by a neck strap to wear comfortably and securely around your neck Step 1. Loop the thin end of the neck strap through the slot on the Headset. Step 2. Loop the thicker side of the neck strap through the loop created by the thin wire and pull until snug. Step 3. Once pulled through, you can wear your Headset around your neck. 8 How to Wear Your Headset (contd) B. To release the strap, hold the strap and pull outwardly.
(See the picture on left) Use the provided neck strap only. It may be necessary to bring the microphone closer to your mouth for lowering background noise. 9 Charging Your Headset Before using your UA-28SE (Headset) for the first time, please plug the charger into the power source and connect the other end to micro USB charging socket of headset to charge the battery fully. Status Indicator Audio (Earpiece) Status 1. Charging Red light ON 2. Fully charged Blue light ON No sound No sound 3. Low battery Red light for every 5 seconds A short beep every 20 seconds 4. Out of battery OFF No sound Use only the supplied charger for charging To extend the battery life, re-charging the battery every 6 months. Charging indication will be delayed in a few seconds if the headset has not been used for a long period of time. 10 Getting Started Turning Your Headset On and Off:
A. Turning on Press and hold the MFB until the status indicator flashes blue. B. Turning off Press and hold the MFB until the status indicator flashes red. Pairing Your Headset with a Bluetooth wireless technology enabled device 1. Turn on the Bluetooth function in the device. 2. Place the headset and the device where they are visible, within arms length from each other. 3. Ensure the headset is OFF. 4. To activate the devices pairing mode, press and hold the MFB until the 5. Search the headset, select UA-28SE and enter the passcode 0000. If your device supports Simple Pairing function, no code is required. 11 Pairing Your Headset with Two Blue-
tooth wireless technology enabled devices (Multi-point) UA-28SE supports a Multi-point function to allow simultaneous pairing of the headset with two devices. 1. Pair the headset with the first device (follow the step in Pairing Your Headset with a Bluetooth wireless technology enabled device). 2. Turn off the headset and the Bluetooth function of the first paired device. 3. Pair the headset with the second device (follow the step in Pairing Your Headset with a Bluetooth wireless technology enabled device). 4. Activate the Bluetooth connection with the headset and the first paired device on the devices menu. For some devices, you may need to manual press connect to connect the headset. If the pairing cannot be completed within two minutes, the headset will auto-
matically go to standby mode and then turn off after five minutes. Repeat steps to pair both devices again. 12 Reconnecting Your Headset 1. If the headset has been powered off, it will reconnect to the phone auto-
matically after switching on the headset, if not, press reconnect on the phone. 2. If the phone has been powered off and headset is then disconnected, the headset will reconnect automatically when phone turns on again. Otherwise, turns on the headset again. 13 Using Your Headset Function Button Incoming Call
--
Audio
(Speaker) Status Indicator Ringtone
(Musice will stop durung incoming call) Blue light flash 3 times in every 3 seconds Answer a Call
(Standby mode /
music playing mode) Press MFB once to accept Di Do tone once Answer a Second Call 1. Press MFB once to end the current call and accept the second Call 2. Press and hold Vol + once to hold the current call and accept the second Call
--
Call Reject Press the MFB twice Di Do tone once Reject a second call directly on the other connected phone during the call. End a Call Press the MFB once Mute /
Unmute Hold /
Unhold During the call, press the Volume + twice /
During the call, press the Volume - twice During the call, press and hold the Volume +
Di Do tone once Di Do tone once Di Do tone once During the call, blue light flash in every 5 seconds During the call, blue light flash in every 5 seconds Blue light flash once Blue light flash once
--
--
14 Using Your Headset (contd) Function Button Audio
(Speaker) Status Indicator Voice Dialing Press and hold the MFB until a short beep Do tone once
--
After you hear a short beep, say the voice tag, and you must have the voice tag record on your mobile phone. Voice redialing is only allowed for those saved voice tag into the 1st connected phone if you have connected two mobile phones. Last Number Redial
(Standby mode /
music playing mode) Press the MFB twice Do tone once
--
Redial the call from the 1st connected phone if two mobile phones are connected. Reset / Remove the pairing history Press and hold the MFB and Volume +
Do Do tone once Red light flashes once Out of range alert
--
Di Do tone Blue light flashing 2 times for every 3 seconds The headset will automatically reconnect within 5 minutes, otherwise it will off. If auto-connect is not supported, press the MFB once. 15 Using Your Headset (contd) Function Button Play a music Press directly from phone Audio
(Speaker) Music Adjust Volume Press the Vol-
ume +/- once to increase/
decrease by 1 level (Total 8 levels) Standby mode without mobile connection
(No network covered) Standby mode with mobile con-
nection
--
--
--
--
--
Status Indicator Blue light keeps flashing when a call is transferred from headset
--
Blue light flashing 2 times for every 3 seconds Blue light flashing 1 time for every 10 seconds 16 Using Your Headset (contd) UA-28SE is designed to work with the mobile phones with Bluetooth Handsfree profiles (or Bluetooth devices), the compatibility of some features are not guaranteed for some phones in different operating system. In order to have a better and clear reception, there should have no obstacle to the headset while talking. 17 Listening the music Enjoy the music in two ways:
A. By a earphone cable (provided) Step 1: Connect the provided earphone cable to the micro USB socket Step 2: Enjoy the music with the earphone and the retractable earpiece B. By your own headphone Step 1: Connect the provided micro USB / 3.5mm female plug connector to the micro USB socket Step 2: Enjoy the music with your own 3.5mm headphone Note:
No sound from the retractable earpiece in this way, using the headset by your own headphone 18 Listening the music (contd) Function Button Play a music Stop playback Select the song during playback Press directly from phone Press the MFB for 2 seconds Press and hold the Vol + for 2 seconds Audio
(Speaker) Music
--
--
Status Indicator Blue light flashing 2 times for every 3 seconds
--
--
19 Troubleshooting I cannot pair with my mobile phone
- Ensure your headset is power on and fully charged
- Ensure the Bluetooth setting is activated on your phone
- Ensure the headset is at pairing mode (ashes blue and red alternately)
- Ensure the headset is not out of range of your phone If the above steps do not solve the problem, please turn off the headset and recharge the headset, and then try again. I cannot hear the sound in my headset
- Ensure your headset is power on and fully charged
- Ensure your headset is paired and connected with your phone
- Ensure the conversation is not transferred to your phone
- Ensure the volume level is high enough I cannot turn off the headset Please press and hold the MFB for a longer time, otherwise, please recharge the headset for 2-3 seconds then disconnect the charger, the headset now turns off. I cannot turn on the headset Ensure your headset is power on and fully charged, otherwise, please charge the headset for 1-1.5 hours, and then turn on again. 20 Troubleshooting (contd) My phone cannot be auto-reconnected with the headset
- Manually connect the headset from your mobile phone
- Turn off the mobile then turn on again
- Turn off the headset then turn on again If the above steps do not solve the problem, turn off the headset and reset it, pairing the headset again. I hear a Beep sound during the call, what happen?
Low battery alert, please charge your headset. I hear some noise during the call, why?
There is an obstruction between the headset and your mobile, please remove it. Or please put your mobile on the table, dont hold it on hand. 21 Safety Precautions 1. Unintentional depression of the retractable button could result in an injury from the force of the earpiece cord retraction. 2. Be careful when retracting the length of the earphone. Keep a safe distance between your face and the headset. 3. If you must use the headset while driving, ensure your attention is fully focused on driving safety. Be a responsible driver and abide by the local laws. 4. Place in a childrens unreachable area, never allows them to play with the headset. Small parts pose as a choking hazard. 5. Obey all designated areas such as hospitals, electronically restrictive and hazardous environment that require an electrical device be switched off. 6. Turn off your headset prior to boarding on an aircraft. Do not use it while being asked by the ight attendant. 7. Never mount or store your headset over any air bag deployment area as serious injury could result upon deployment. 8. Do not attempt to disassemble the headset as it does not contain serviceable components. 9. Headset builds with battery inside and should dispose of it according to local regulations, not as a household waste. 22 Maintenance 1. Do not yank or forcibly pull the earphone cord. 2. Consider turning your headset off before placing it in your pocket or bag. If the MFB is accidentally pushed, your mobile phone may place an unin-
tended call. 3. Do not expose the headset to liquid or humidity, as it is not waterproof. 4. Do not use abrasive cleaning solvents to clean the headset. 5. Do not expose the headset to extremely high or low temperatures. 6. Do not expose your headset to contact with sharp objects as this will cause scratches and damage. 7. Do not stick anything inside the headset as this may damage internal components. 8. Do not attempt to replace the headsets battery. It is built-in and is not removable. 9. Use only the manufacturer supplied charger when charging the headset. 10. Do not disassemble the charger as it may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the headset is subsequently used. 23 Increase the separation between the equipment and receiver. Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.