Retractable Bluetooth Headset UA-03 User Guide Product Specification...................... 1 Introduction..................................... 1 Turning Your Headset On and Off 2 Low Battery..................................... 2 Pairing Your Headset...................... 3 Headset Features............................. 4,5 Safety Precautions 6 Maintenance.................................... 7 Patented Mechanism QD ID No.:B012556 Turning Your Headset On and Off Press and hold the MFB button for three seconds to turn the headset on or off. Low Battery When the headset is On and the battery capacity becomes low, the LED will flash in red. can length The headset is designed to clip The on your clothing. earpiece be extended by gently pulling on the cord. The length can be retracted by pressing the circular winding button near the top of the device.
(shortened) 2 Headset Features:
These functions are only applicable to mobile phones with Bluetooth Hands-free profiles. Answering a Call Press the MFB once to accept a call when your mobile phone rings. Ending a Call Press the MFB once to end an active call. Reject an incoming call Press the MFB twice to reject a call when your mobile phone rings. Out of range alert When the distance of the headset and Bluetooth-enabled device is out of range, you will hear a beep in the earphone. If auto-connect is not supported, press the MFB once. The headset will turn OFF automatically after 3 minutes. Dialing from Your Mobile phone Dial on your mobile phone. Using voice-activated dialing If your mobile phone is equipped with a voice-activated dialing function, press the MFB on your headset during standby mode. When you hear a beep, say the voice tag.
(Please be sure to record voice tags in your mobile handset before attempting to use the voice-activated dialing function.) Reset Turn off the headset, then press the Volume + button & the MFB at the same time for 5 seconds until the LED flashes red. 4 Safety Precautions:
Unintentional depression of the retractable button could result in injury from the force of the earphone retraction. Be careful when retracting the length of the earphone. Keep a safe distance between your face and the headset. Please abide by local laws regarding use of a mobile phone and headset while driving. If you must use the headset while driving, ensure that your attention and focus remains on driving safely. Never allow children to play with the headset. Small parts pose a choking hazard. Obey all signs that require an electrical device to be switched off in designated areas, such hospitals, electronically restrictive and hazardous environment. Turn off your headset prior to boarding aircraft. Do not use your headset in an aircraft. Never mount or store your headset over any air bag deployment area as serious injury could result upon deployment. Do not attempt to disassemble the headset as it does not contain serviceable components. Dispose of battery according to local regulations. Do not dispose as household waste. 6 Product Specification:
Bluetooth Version Charging Time Talk time &
Standby Time Product range V2.0 Class 2 & with backward compatible v1.2 around 2.5 hours 7 hours talk time and up to 160 hours standby time 10metres with no obstructions 0-50 Operating Temperatures Battery type &
capacity Introduction: Thank you for choosing the patented Retractable headset, inside the package we should find:
Rechargeable Li-Polymer 100mAh 1x Retractable Headset 1x USB Car Charger with a USB cable 1x User guide Before using the product, please insert the charger plug into the headsets DC Jack and connect the USB charger into a power source. The LED will remain lit in red while charging. Once fully charged, the LED will turn off . To extend the battery life, we recommend re-charge the battery every 6 months. Charging indication will be delayed a few seconds if the headset has not been used for a while. Pairing Your Headset:
To successfully use the Headset, it must be paired with a Bluetooth-enable device, like a mobile phone or wireless-friendly computer. Pairing procedures may vary according to device. 1. Activate your mobile phone Bluetooth function by referring to its instructions in the 1 appropriate user guide. 2. Place the headset and the mobile phone where they are visible, within arms length from each other. 3. Confirm headset is powered OFF. 4. Press and hold the MFB for 8 seconds until the headset LED flashes blue and red. 5. Search for headset from the Bluetooth-enable device according to the user guide of the device. 6. Enter the pre-programmed passcode 0000 and press OK to pair your headset and mobile phone. When pairing is complete, the headset LED will flash blue followed by beeps. 7. Now the headset is ready to receive calls. If the pairing does not complete within 1 minute and 30 seconds the headset will automatically turn off. If this occurs, repeat steps 2 through 7 until successful. 3 Headset Features (continued) Redialing last number called If your headset is equipped with this function, press the MFB twice in standby mode. The mobile phone will redial the last number called. Transfer call from headset to mobile phone During an active call, press the MFB twice to transfer call to the mobile phone. Transfer call from mobile phone to headset During an active call, press the MFB twice to transfer call to the headset. Mute Press & hold the Volume button for 3 seconds to mute. When mute, press & hold button again to disable the mute function. Conference (3-way) calling Please refer to the mobile phone user guide. No network alert If the service provider network is not available, the headset will beep every 20 seconds. Adjust the Volume The headset is equipped with an intelligent voice system. There are eight volume levels possible in your headset. To increase the volume, press the + button until desired volume is reached. To decrease the volume, press the - button until desired volume is reached. In a quiet environment, you can decrease the earphone volume and speak quietly. 5 7 Maintenance:
Do not yank or forcibly pull the earphone cord. Consider turning your headset off before placing it in your pocket or bag. If the MFB is accidentally pushed, your mobile phone may place an unintended call. Do not expose the headset to liquid or humidity, as it is not waterproof. Do not use abrasive cleaning solvents to clean the headset. Do not expose the headset to extremely high or low temperatures. Do not expose your headset to contact with sharp objects as this will cause scratches and damage. Do not stick anything inside the headset as this may damage internal components. Do not attempt to replace the headset's battery. It is built-in and is not removable. Use only the manufacturer supplied charger when charging the headset. Do not disassemble the charger as it may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the headset is subsequently used. CHANNEL ENTERPRISES (H.K.) LTD. Product Name: Retractable Bluetooth Headset Model No.: UA-03 FCC ID: WD31515 THIS DEVICE COMPLIES WITH PART 15 THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.